1500 front tire change (axle position)

zoom45 · 10-27-2008, 03:00 PM

I just put a new tire on the front but was curious if it matters where the hole in the front axle lines up. The factory manual doesn't say. It says to put it in and tighten the axle nut to 80 ft lbs and the set bolt to 25 ft lbs. If you don't tighten the set bolt first, the axle wants to turn the speedometer drive when you tighten the big axle nut which could damage the tabs for it. My axle bolt hole is parrallel to the ground not straight up and down. Does it matter? ???
Zoom45

10-27-2008, 03:00 PM	#1
zoom45 Sr. Member Join Date: Jul 2007 Location: Terry, Mississippi Posts: 1,434	1500 front tire change (axle position) I just put a new tire on the front but was curious if it matters where the hole in the front axle lines up. The factory manual doesn't say. It says to put it in and tighten the axle nut to 80 ft lbs and the set bolt to 25 ft lbs. If you don't tighten the set bolt first, the axle wants to turn the speedometer drive when you tighten the big axle nut which could damage the tabs for it. My axle bolt hole is parrallel to the ground not straight up and down. Does it matter? ??? Zoom45 __________________ Bobby Risher Terry, MS Kawanow member # 124 South Central Group 2000 Nomad 1500 (carbed) 128,000 miles Login or Register to Remove Ads
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tire Position	sturmannderss	1500 & 1600 Nomad	9	01-12-2011 04:37 PM
HOW TO CHANGE A FRONT TIRE!	timebandit	Off-Topic	7	03-13-2009 06:48 PM
Change Jobs? -Update-Accepted Position	unwind2	Off-Topic	48	01-08-2009 05:00 PM
Front axle removal	Yellow Jacket	1500 & 1600 Nomad	16	09-30-2008 06:20 PM
Front axle	jayc	Vulcan Nomad/Vaquero/Voyager	3	10-16-2007 10:53 PM