Pullback for straight 6" riser

bobzinger · 01-26-2011, 12:28 PM

**Jared** · 01-26-2011, 01:26 PM

That is a great option. There are several 6" risers on ebay for cheap. Hopefully they don't bump the speedo housing...

trosco · 01-26-2011, 06:15 PM

Just to point out an alternative to the $100+ cost of the aftermarket risers.
The stock Nomad riser is 2 1/4 inches tripple clamp to HB centerline. 2 inch and 3 inch riser extensions (they go in between the stock riser base and the tripple clamp) are available all over for $20 to $40. Those extensions give you the choice of 4 1/4 or 5 1/4 rise and there fore 1 1/4 or 1 3/4 inch set back over just the stock riser.
That gives you $75 to spend on coming to the National Rally!

**Jared** · 01-26-2011, 06:18 PM

I'm not in the market to put risers on my bike, but if I was, I would go with these and then sell my stockers for a few bucks.

http://cgi.ebay.com/ebaymotors/Chrom...item3364455715

01-26-2011, 12:28 PM	#1
bobzinger Sr. Member Join Date: Sep 2007 Location: Livermore CA Posts: 1,334	Pullback for straight 6" riser __________________ Life is Good! Eternal Life is better! Login or Register to Remove Ads
	0

01-26-2011, 01:26 PM	#2
Jared Join Date: Mar 2009 Location: Greeley, Colorado Posts: 6,772	Pullback for straight 6" riser That is a great option. There are several 6" risers on ebay for cheap. Hopefully they don't bump the speedo housing... __________________ Jared VBA #1051 (Former President)
	0

01-26-2011, 06:15 PM	#3
trosco Sr. Member Join Date: Feb 2008 Location: Charlotte, NC Posts: 1,464	Pullback for straight 6" riser Just to point out an alternative to the $100+ cost of the aftermarket risers. The stock Nomad riser is 2 1/4 inches tripple clamp to HB centerline. 2 inch and 3 inch riser extensions (they go in between the stock riser base and the tripple clamp) are available all over for $20 to $40. Those extensions give you the choice of 4 1/4 or 5 1/4 rise and there fore 1 1/4 or 1 3/4 inch set back over just the stock riser. That gives you $75 to spend on coming to the National Rally! __________________ trosco: just call me Ross 2007 Black & Titanium Nomad (Nomad made 65K but got replaced 2014) 2010 Titanium Goldwing 2014 KLR 650 New Edition
	0

01-26-2011, 06:18 PM	#4
Jared Join Date: Mar 2009 Location: Greeley, Colorado Posts: 6,772	Pullback for straight 6" riser I'm not in the market to put risers on my bike, but if I was, I would go with these and then sell my stockers for a few bucks. http://cgi.ebay.com/ebaymotors/Chrom...item3364455715 __________________ Jared VBA #1051 (Former President)
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Straight pipes	Nubbs	1500 & 1600 Nomad	30	09-14-2011 09:45 PM
Installed Aeromach 4" Pullback Risers	Cajunrider	Vulcan Nomad/Vaquero/Voyager	13	02-28-2010 11:00 PM
"A Riser Alternative"	VulcanE	Vulcan Nomad/Vaquero/Voyager	14	09-14-2009 05:30 PM
Let me get this straight.........	Idaho	Off-Topic	22	06-18-2009 03:04 PM
WTB: 4" riser/pullbacks for '06 Nomad 1600	ds06nomad	Wanted	4	01-20-2008 01:27 PM