|
08-31-2008, 04:40 PM | #1 |
Sr. Member
Join Date: Oct 2007
Location: Dedham Maine
Posts: 4,199
|
7$ Exhaust Tips
I picked up a Modded exhaust system,and it was drilled w/a 2" hole saw.. Look Ok but the gap was bugging me,, then the left.. so to fill in the gap I tried a few copper reducers,, 2' to 1 1/4" the same size as stock exit pipe,,, seems to help alittle with low end torque like Cadd Q said... so I trim the 1 1/4" down alittle and drive the reducer in deeper.....Ill paint them BLACK,, BUT all in all not bad,,Plus changed the tone alittle,,, AND you can use exhaust reducers as well about 5/8$ Rich
__________________
Login or Register to Remove Ads |
|
08-31-2008, 07:20 PM | #2 |
Member
Join Date: Apr 2008
Location: Ft Myers FL Most of the time
Posts: 218
|
7$ Exhaust Tips
I like the looks ! I'm sure it will help the low end torque too. On my cobra's, I put a 1/4'' bolt through the exhaust tips to help regain the lost low end torque. I think you will note a difference.
|
|
08-31-2008, 08:56 PM | #3 |
Mega-Contributor
Join Date: Sep 2007
Location: Where it doesn't snow...ever!
Posts: 21,926
|
7$ Exhaust Tips
Your mufflers look like Cherry Bombs now! Let us know if you notice any difference in performance or torque.
__________________
Scott "Cactusjack" Hanks VBA #00105 H.O.G. #4250060 2011 H-D Ultra Limited 103ci :: 2011 HD Electra Glide Ultra Limited w/Stage 1 :: Rallies: Mesquite '08|Custer '09|Cortez '10|Crescent City '11|Kanab '12|Antlers '12|Estes Park '13|Antlers '13|Orofino '14|The Dalles '17 |
|
09-01-2008, 02:12 AM | #4 |
Sr. Member
Join Date: Mar 2008
Location: Kerrville Tx
Posts: 1,713
|
7$ Exhaust Tips
don't paint them, let'm age.
__________________
Robert(skeeter)Dozier 07 Red&Titanium Nomad 81 Suzuki 850GL KawaNow pre# |
|
09-01-2008, 06:34 AM | #5 |
Sr. Member
Join Date: Oct 2007
Location: Dedham Maine
Posts: 4,199
|
7$ Exhaust Tips
THANKS for the ideas,, I may add that bolt mod... and IMO it does add alittle bit to the low end,,,,NOT a TON but Seems to help..May be in my head and there isnt much there anyway ::).. AND it does HELP the sound alittle as well.a little different tone I thought about the tips againg so thats a maybe..I can allways paint them later.....BUT the maine reason I put them on was to cover the space from the mod job.So all around Im happy .......Rich
__________________
Login or Register to Remove Ads |
|
09-01-2008, 07:33 AM | #6 |
Top Contributor
Join Date: Aug 2007
Location: The VooDoo Lounge
Posts: 5,780
|
7$ Exhaust Tips
I regards to the low end, I noticed the V&H gives me more low end but I lose some at top end. I think that's typically how it works but I've been known to be wrong in the past.
__________________
2012 FLHTK |
|
09-01-2008, 07:59 AM | #7 |
Mega-Contributor
Join Date: Sep 2007
Location: Where it doesn't snow...ever!
Posts: 21,926
|
7$ Exhaust Tips
Should have used the 1-3/4" hole saw when you debaffled. ::)
Edit: My bad. Didn't notice where you said the pipes came that way.
__________________
Scott "Cactusjack" Hanks VBA #00105 H.O.G. #4250060 2011 H-D Ultra Limited 103ci :: 2011 HD Electra Glide Ultra Limited w/Stage 1 :: Rallies: Mesquite '08|Custer '09|Cortez '10|Crescent City '11|Kanab '12|Antlers '12|Estes Park '13|Antlers '13|Orofino '14|The Dalles '17 |
|
09-01-2008, 08:17 AM | #8 | |
Join Date: Jul 2007
Location: Peoples Republic of New York State
Posts: 15,154
|
7$ Exhaust Tips
Quote:
__________________
Tim "TC" Conley VBA #9 2011 Victory Kingpin mine 2013 Victory Boardwalk -hers [LEFT][COLOR=#000000] [SIZE=4] |
|
|
09-01-2008, 09:11 AM | #9 |
Sr. Member
Join Date: Oct 2007
Location: Dedham Maine
Posts: 4,199
|
7$ Exhaust Tips
CJ TC is right .. I purchased the whole system allready done,,,The Goat Belly has a PERFECT weld .. If I did it I would use the 1 3/4" hole saw.. I have a whole set of hole saws ::).... Rich
__________________
|
|
09-01-2008, 12:01 PM | #10 |
Jr. Member
Join Date: Sep 2007
Location: Poconos
Posts: 40
|
7$ Exhaust Tips
Here's what i did with my pipes. After the muffler modification(that sounds great) I didn't like the big open holes in the end so i made these out of perforated steel and just riveted them in place.
|
|
09-01-2008, 12:29 PM | #11 |
Sr. Member
Join Date: Oct 2007
Location: Dedham Maine
Posts: 4,199
|
7$ Exhaust Tips
Jimbo,,NOW thats cool. I wonder what else people have done for tips Etc... DID that change the sound alitle?? notice and Lo End Torque difference??? Im also going to try the Loli Pop add on..... Rich
__________________
|
|
09-01-2008, 01:05 PM | #12 |
Top Contributor
Join Date: Jul 2007
Posts: 5,263
|
7$ Exhaust Tips
Nice add on and good idea Jimbo, I have V&H so it would take a 4 inch copper plug for those which i dont think would work.
|
|
09-01-2008, 02:45 PM | #13 |
Mega-Contributor
Join Date: Sep 2007
Location: Where it doesn't snow...ever!
Posts: 21,926
|
7$ Exhaust Tips
Wow Jimbo, great idea. It would keep the critters out, too.
__________________
Scott "Cactusjack" Hanks VBA #00105 H.O.G. #4250060 2011 H-D Ultra Limited 103ci :: 2011 HD Electra Glide Ultra Limited w/Stage 1 :: Rallies: Mesquite '08|Custer '09|Cortez '10|Crescent City '11|Kanab '12|Antlers '12|Estes Park '13|Antlers '13|Orofino '14|The Dalles '17 |
|
09-01-2008, 04:42 PM | #14 |
Member
Join Date: May 2008
Location: Yonkers, NY
Posts: 271
|
7$ Exhaust Tips
Radco,
Great idea! They really finish it out nicely. Jimbo, Another great idea! I think this could work for me with my Cobra Slash Cuts and tone them down a little. JohnB |
|
09-01-2008, 05:28 PM | #15 | |
Sr. Member
Join Date: Oct 2007
Location: Dedham Maine
Posts: 4,199
|
7$ Exhaust Tips
Quote:
__________________
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Exhaust turn down tips for OEM Exhaust/mufflers | rcmedic | 1500 & 1600 Nomad | 17 | 08-02-2011 04:04 PM |
Exhaust Tips. | clayton | Parts & Accessories | 7 | 11-04-2010 07:56 AM |
Used Valkyrie Exhaust Tips **SOLD** | Cajunrider | Parts & Accessories | 10 | 07-20-2010 07:28 PM |
Valkyrie exhaust tips | recumbentbob | Vulcan Nomad/Vaquero/Voyager | 0 | 05-28-2010 04:51 PM |
Stock Exhaust tips | 1500 & 1600 Nomad | 7 | 03-30-2010 08:20 AM |