|
|
06-06-2014, 09:47 AM
|
#1 |
|
Jr. Member
Join Date: Jan 2014
Location: Pensacola
Posts: 34
|
ignition switch broken
my bike shut down at a red light. I used my tools and time to find a wire had broken loose on the back of the ignition switch. The solder had deteriorated. A second wire popped off also. Is there a switch recall? Does anyone know a good source for a quality replacement. I could re-solder it but it feels worn anyway and I would feel better about a new one. JB weld got me home but barely, it already popped off again. This is the switch with the key.
__________________
 2005, 23k
Login or Register to Remove Ads
Last edited by jagcamp; 06-06-2014 at 10:02 AM.
|
|
|
06-06-2014, 10:00 AM
|
#2 |
|
Member
Join Date: Apr 2014
Location: San Jacinto, Ca
Posts: 125
|
New switch from the dealer is about $103.00
2700527005-0001SWITCH-ASSY-IGNITION 1 $102.63
__________________
 IF YOUR BORN ONCE YOU WILL DIE TWICEIF YOUR BORN TWICE YOU WILL DIE ONCE |
|
|
|
06-06-2014, 01:31 PM
|
#4 |
|
Member
Join Date: May 2013
Location: Thrae Tenalp
Posts: 132
|
Please ensure that your replacement switch was NOT manufactured by a GM supplier!
__________________
Wanna go, pretty boy? Illegitimati non carborundum -Gen. Joseph Stilwell 1999 VN 1500 Nomad |
|
|
|
06-06-2014, 07:46 PM
|
#5 |
|
Sr. Member
Join Date: Sep 2013
Location: On The Shakey Side
Posts: 2,501
|
...GM Ignition switches... !!!
It must be nice to be so damn important you cant be fired ! ..let alone... hanged ! As for Big KAWK Ignition switches..I think I'd research what NAPA may have that I could use as a replacement for the OEM part... that's just to much $$$ for a switch ! Login or Register to Remove Ads |
|
|
Linear Mode
