|
![]() |
#1 |
Jr. Member
Join Date: Jul 2011
Location: Williams, Arizona
Posts: 14
|
New PC Map
Hi everyone, I found a few problems causing a bad decel backfire on my 05 1600 Nomad. I started with the "marble" which stopped most of the backfire but then I started hearing an exhaust leak. I tightened the flanges at the engine and that solved almost all of the backfire. I recently added the Cadman dual air cleaners on Gadgets fixit page. Now I'm trying to find a new PC Map for this intake setup and V&H pipes. Any suggestions? ???
Login or Register to Remove Ads |
![]() |
![]() |
#2 |
![]() Join Date: Aug 2007
Location: Newmarket Ontario Canada
Posts: 35,387
|
New PC Map
Im sure the Power Commander website has some maps listed.
__________________
2002 Nomad aka Bountyhunter VBA #27 VROC #18951 |
![]() |
![]() |
#3 |
Jr. Member
Join Date: Jul 2011
Location: Williams, Arizona
Posts: 14
|
New PC Map
Thanks Ringadingh, I'm currently running the Map for "V&H w/aftermarket or stock intake". It's part of the m220-all download at Power Commander's web sight. The intake flows a lot more air now so I thought it might be running lean and that there might be a better map somewhere to download.
|
![]() |
![]() |
#4 |
![]() Join Date: Aug 2007
Location: Newmarket Ontario Canada
Posts: 35,387
|
New PC Map
Perhaps there is someone here that has a custom map, they would share.
__________________
2002 Nomad aka Bountyhunter VBA #27 VROC #18951 |
![]() |
![]() |
#5 |
Member
Join Date: Apr 2009
Location: Bend, Oregon
Posts: 258
|
New PC Map
Hi Swen. I also have an '05 1600 set up just like yours. I'm currently using Map M220-02 which is probably what you're using.
I'm going to install the Chucksters plate this winter and was also wondering if this Map is going to work well with all of the extra air. Unfortunately PC's website doesn't list real MAP alternatives. It just shows one map for a a 1600 with V & H Bagger exhaust and stock/aftermarket air. There seem to be relatively few Power Commander users on this forum but here you can always find someone who has BTDT. Hopefully they'll chime in. Login or Register to Remove Ads |
![]() |
![]() |
#6 |
Jr. Member
Join Date: Jul 2011
Location: Williams, Arizona
Posts: 14
|
New PC Map
Hey cantridenuf, you're right about PC's web site, they don't have very much. Thanks for the help. I'll keep looking too. I'll post whatever I find. I did both sides on the intake, it really breaths now. Sounds good too.
It looks like we have the same paint. I just put new tires on so had the back end apart. It looks good as a solo, I think I'll run that way for a while. |
![]() |
![]() |
#7 |
Member
Join Date: Oct 2008
Location: Maysville, Ky.
Posts: 283
|
New PC Map
Thunder Mfg. has some maps on their website that you might want to look into. I had mine dyno'd and I have right side Caddman with V&H. Let me know if thunders help you. My map might work for you but every bike is different. Be glad to share it with you if needed.
|
![]() |
![]() |
#8 |
Jr. Member
Join Date: Jul 2011
Location: Williams, Arizona
Posts: 14
|
New PC Map
Thanks sharps45100 for the info. I'll check out Thunder Mfg, I forgot about them. I'll let you know what I find.
|
![]() |
![]() |
#9 | |
Sr. Member
Join Date: Sep 2009
Location: Owasso, OK
Posts: 1,485
|
New PC Map
Quote:
__________________
Matt "Mo" Moore ![]() Owasso, Oklahoma VBA #1250 2005 Nomad 1600 - Darkside "There is no normal life, there's just life. So get on with it." - Doc Holiday |
|
![]() |
![]() |
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
US Map | nomadtom69 | Rides/Trip Reports/Travel Information | 5 | 12-30-2010 02:35 PM |
Map | dennisbailey | Vulcan Nomad/Vaquero/Voyager | 2 | 04-18-2009 07:17 AM |
Member Map | papat | Off-Topic | 5 | 01-09-2009 06:26 PM |
Chuck's map | dantama | In Memoriam | 10 | 08-02-2008 03:56 PM |
Map | Vulcan Nomad/Vaquero/Voyager | 1 | 04-07-2008 10:25 PM |