Problem with lightbar

[mac]

I was adjusting my spotlights on my lightbar last week when both went out. At first I thought I may have blown a fuse, but couldn't find a fuse and don't believe there is one. Uppon further investigation I see I may have cut/damaged the wire coming out of the spotlight as I must have pinched it trying to tighten the bolt. I repaired it, but no lights. Tried a new bulb, no lights...

Is it possible for a relay to go out? It has a relay and a switch.

[Top Cat]

I'm no electrician by a long shot but, my first guess would be when you cut the wire it blew a fuse. So if you are certain there is no fuse in the circuit I would check to see if you loosened a ground wire. If thats not it I would try a new relay.
I'm sure someone else will be right along to give more advice.

[drno]

You could follow the circuit with a test light and see where you have current and where you dont to isolate the problem.

[ringadingh]

It most likely is fused somewhere, check the accessory fuse, and also check if you burned out the switch.

[mac]

Thanks guys. I keep thinking there must be a fuse somewhere, now I just have to find it. Messing with it yesterday I saw where two connectors came lose that controlled the running lights/turn signals. Plugged them back in and the blinkers work, but they don't stay on as running lights..... ugh! Must have knocked something else lose.