|
06-04-2009, 06:39 PM | #1 |
Join Date: Dec 2007
Location: Denver, CO
Posts: 0
|
Dan's $6.00 Ram Camera mount
I built a camera mount for my camera that clamps onto the bars. I was too cheap to buy one, so I made one.
I'm going for a ride with Ells for lunch tomorrow, so I'll see how the pictures turn out. If it works fine, you can make one for $6.00, less if you don't buy stainless threaded parts. Login or Register to Remove Ads |
|
06-04-2009, 07:11 PM | #2 |
Sr. Contributor
|
Dan's $6.00 Ram Camera mount
I can't even tell what that is????
__________________
I love my Victory Cross Country Tour 106. Smells like Victory! Ultra's are Limited There are two types of Harley riders. Those that trailer them and those that push them. The most Interesting Man in the World "Find the things in life you don't do well and don't do those things" Member # 0005 |
|
06-04-2009, 07:15 PM | #3 |
Join Date: Aug 2007
Location: Newmarket Ontario Canada
Posts: 35,387
|
Dan's $6.00 Ram Camera mount
It looks like it should be ok, as long as it doesn't vibrate to much.
__________________
2002 Nomad aka Bountyhunter VBA #27 VROC #18951 |
|
06-04-2009, 07:15 PM | #4 | |
Mega-Contributor
Join Date: Sep 2007
Location: Where it doesn't snow...ever!
Posts: 21,926
|
Dan's $6.00 Ram Camera mount
Quote:
__________________
Scott "Cactusjack" Hanks VBA #00105 H.O.G. #4250060 2011 H-D Ultra Limited 103ci :: 2011 HD Electra Glide Ultra Limited w/Stage 1 :: Rallies: Mesquite '08|Custer '09|Cortez '10|Crescent City '11|Kanab '12|Antlers '12|Estes Park '13|Antlers '13|Orofino '14|The Dalles '17 |
|
|
06-04-2009, 07:31 PM | #5 | |
Join Date: Dec 2007
Location: Denver, CO
Posts: 0
|
Dan's $6.00 Ram Camera mount
Quote:
That wing nut in the picture locks the screw down in the slot cut in the top piece. The slot is so that it can be moved forward and back as needed to aim the camera. I also have another wing nut that will go on the threaded part upside down, to lock the camera on. It would make more sense if I took a picture of the camera mounted, but with one camera that's not so easy to do :) Login or Register to Remove Ads |
|
|
06-04-2009, 10:03 PM | #6 |
Join Date: Mar 2009
Location: Greeley, Colorado
Posts: 6,772
|
Dan's $6.00 Ram Camera mount
I made the exact same thing for an iron butt ride i did last month. The pictures turned out okay and the videos turned out great.
__________________
Jared
VBA #1051 (Former President) |
|
06-04-2009, 11:00 PM | #7 | |
Join Date: Dec 2007
Location: Denver, CO
Posts: 0
|
Dan's $6.00 Ram Camera mount
Quote:
|
|
|
06-05-2009, 06:38 AM | #8 | |
Advanced Member
Join Date: Dec 2008
Location: Thurmont MD
Posts: 760
|
Dan's $6.00 Ram Camera mount
[quote=Dan Lund] Quote:
Show me yours, I'll show you mine?
__________________
Bob Hamlin RC PGR '06 VN1600D6F |
|
|
06-05-2009, 06:55 AM | #9 |
Top Contributor
Join Date: Dec 2007
Location: Aquashicola Pa.
Posts: 6,377
|
Dan's $6.00 Ram Camera mount
I'd be interested in seeing it the camera mount ::) that is. I like to see if you guys get a reflection from the shield.
__________________
I'm not prejudice I hate everyone equally;) 08 nomad blue/silver MaryJane 74,010miles VBA #299 Her's 10 900LT 36,700 09 Bath NY. 10 Lake George NY. 11 National Maggie Valley NC. 12 Pa Wilds (Wellsboro) Pa. 14 Lincoln NH. 17 National Lake George NY. |
|
06-05-2009, 02:39 PM | #10 |
Join Date: Mar 2009
Location: Greeley, Colorado
Posts: 6,772
|
Dan's $6.00 Ram Camera mount
Yes there is a reflection-depending on the light angle.
__________________
Jared
VBA #1051 (Former President) |
|
06-05-2009, 05:37 PM | #11 |
Join Date: Dec 2007
Location: Denver, CO
Posts: 0
|
Dan's $6.00 Ram Camera mount
Fish was right about the reflections. I went for a ride with Ells at lunch and tried it out. There is a reflection from the silver on the camera. I'll post a video after it gets done uploading to youtube.
I'll look it over and see if it's something that some black felt in the right place will fix. It's easier to ride when you aren't holding the camera in one hand and riding with the other, but my arm was pretty good at keeping the vibrations out and keeping it even with the horizon when dipping into a turn. |
|
06-05-2009, 06:27 PM | #12 |
Top Contributor
Join Date: Dec 2007
Location: Aquashicola Pa.
Posts: 6,377
|
Dan's $6.00 Ram Camera mount
I have my camera on a ram mount just to the outside of the shield, no reflections but it does get hammered with bugs :(" title="" border="0"/>
as you can see I don't have much room for anything else I took the GPS off the speedo and the ram mount on the left is where I put the digital camera
__________________
I'm not prejudice I hate everyone equally;) 08 nomad blue/silver MaryJane 74,010miles VBA #299 Her's 10 900LT 36,700 09 Bath NY. 10 Lake George NY. 11 National Maggie Valley NC. 12 Pa Wilds (Wellsboro) Pa. 14 Lincoln NH. 17 National Lake George NY. |
|
06-05-2009, 06:44 PM | #13 |
Advanced Member
Join Date: Apr 2009
Location: Jacksonville, Florida
Posts: 742
|
Dan's $6.00 Ram Camera mount
Holy Crap Fish...LOL...so how did you run the plumbing for the "kitchen sink" ...you've got everything else, just assuming you've got a sink too
__________________
2012 Vaquero Special edition Candy Lime Green / Ebony Cobra slip on exhaust, Kuryakyn Alley Cat intake, Cobra FI2000 Fuel Processor, Quick release trunk, Front & rear crashbars powdercoated black, Paul Yaffee stealth 3 tag frame, Arlen Ness grips, Corbin seat, Custom pinstripping, Rear LED strip turn signals, Stock rear turnsignals / tagframe assembly removed |
|
06-05-2009, 06:52 PM | #14 | ||
Join Date: Jul 2008
Location: North Central Illinois
Posts: 8,575
|
Dan's $6.00 Ram Camera mount
Quote:
__________________
"During times of universal deceit, telling the truth becomes a revolutionary act." "You can have your own opinion, but not your own facts." Former VBA NCR Assist Regional Leader Formerly: 2004 1500FI Bronze Nomad: 2009 & 2014 HD Ultra Current Rides: 2017 HD Ultra Limited & 2011 Can Am Spyder RTS-SE Attended: VBA National Rallies 2009, 2011, 2015; VBA/NCR Regional Rally 2010, 12, 14, 16 and several rides throughout with regional members. VBA Member #652 HOG Member #3935417 |
||
|
06-05-2009, 07:50 PM | #15 |
Sr. Member
Join Date: Oct 2007
Location: Colorado Springs, Colorado/Las Vegas, NV
Posts: 3,390
|
Dan's $6.00 Ram Camera mount
Hey fish, why two GPS units?
Impressive looking cockpit man! :)
__________________
Audiogooroo - Daryl Porter Colorado Springs, CO VBA #248 VROC #17261 1999 Grn/Grn Nomad |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Video Camera/Camcorder Mount | jay02904 | 1500 & 1600 Nomad | 29 | 08-21-2011 03:59 PM |
WTB Ram Parts | cajun2wheels | Wanted | 0 | 02-27-2011 10:47 AM |
Product Review – Arai SA-RAM 3 Helmet | usranger74 | Vulcan Nomad/Vaquero/Voyager | 6 | 08-30-2010 06:13 PM |
Aria SZ/Ram III | usranger74 | Vulcan Nomad/Vaquero/Voyager | 1 | 04-28-2010 09:11 AM |
ALMOST WENT DOWN & CAUGHT ON CAMERA! | cheriann | Motorcycle Safety/Riding Techniques | 36 | 07-02-2009 06:28 PM |