|
|
06-11-2015, 11:13 PM
|
#1 |
|
Jr. Member
Join Date: Jun 2015
Posts: 2
|
Rear brakes
Changing the brakes on my '99 1500 nomad, and come upon a problem. Theres a bracket that slides on pins fitting over my pad. The pins extend in both directions and moves as the pads wear. Problem is when i move the bracket toward the caliper, the pins are to long to remove the pad. When i move the bracket toward the pad to take it.out of the caliper, that side of the pins are to long also. They are Tokico calipers. Im out of ideas. HELP plz
Login or Register to Remove Ads |
|
|
06-11-2015, 11:15 PM
|
#2 |
|
Jr. Member
Join Date: Jun 2015
Posts: 2
|
I have pics if they would help
|
|
|
|
06-12-2015, 10:09 AM
|
#5 |
 
Join Date: May 2009
Location: Greenwood, Ark.
Posts: 4,736
|
Like Teachme it's been awhile since I put pads on but I believe there is a clip on the end of pin that needs to be removed so you can take the pin out.
__________________
 Dave Jesse 2012 1700 Gray/Black Voyager 2006 1600 Nomad Green/Silver Sold VBA #1108 2010- Eureka Springs - Antlers - 2011- Maggie Valley - Antlers 2012- Margaritaville Ride - Van Buren - Antlers - 2013- Estes Park - Antlers 2014- Mountain View - Antlers - 2015- Eureka Springs - Antlers 2016- Salem - Antlers - 2017- Eureka Springs - Lake George - Antlers - 2018- Custer - Antlers Login or Register to Remove Ads |
|
|
Linear Mode
