|
![]() |
#1 |
![]() Join Date: Jun 2013
Location: South Shore, MA
Posts: 4,629
|
air horn location
I know a lot of people have changed out the electric horns on their bikes to Stebel air horns. Where did you mount the Stebel? Pictures would be great if you have them.
__________________
VBA # 02424 VROC # 35971 2010 Nomad 1700 Metallic Diablo Black/Metallic Titanium Login or Register to Remove Ads |
![]() |
![]() |
#2 |
Jr. Member
Join Date: Mar 2014
Location: Simcoe, Ontario
Posts: 29
|
Good question - I'd be interested to hear tales of either air horns or high output electrics.
|
![]() |
![]() |
#3 |
![]() Join Date: Jun 2013
Location: South Shore, MA
Posts: 4,629
|
I have to get rid of that little toot toot horn that came stock on my bike.
__________________
VBA # 02424 VROC # 35971 2010 Nomad 1700 Metallic Diablo Black/Metallic Titanium |
![]() |
![]() |
#4 |
Top Contributor
Join Date: Nov 2007
Location: Fayetteville, Georgia
Posts: 5,792
|
I mounted mine to the top bolt on the engine guard, right above the stock horn.
![]() ![]() ![]() The horn switch still operates the original horn while the push button in the photo above operates the Stebel. This is a 1600 Nomad.
__________________
Bob KawaNOW/VBA 210 Green/Silver 2006 Patriot Guard Riders 2009
Last edited by Yellow Jacket; 05-10-2014 at 02:05 PM.
|
![]() |
![]() |
#5 |
![]() Join Date: Jul 2007
Location: Peoples Republic of New York State
Posts: 15,154
|
I replaced mine o my 08 and put the air horn in the same place as the oem was.
I replaced the oem on Cindy's Boardwalk and hose clamped it to her front down tube. It doesn't look as bad as it sounds ![]() I'll post a pic later. later.
__________________
Tim "TC" Conley VBA #9 2011 Victory Kingpin mine 2013 Victory Boardwalk -hers [LEFT][COLOR=#000000] [SIZE=4] Login or Register to Remove Ads |
![]() |
![]() |
#6 |
Member
Join Date: Jul 2011
Posts: 64
|
Here's where mine is mounted on a bracket where the oem engine guard is mounted on my 2011 Vaquero
|
![]() |
![]() |
#7 |
![]() Join Date: Jan 2009
Location: Psychiatric Ward FL
Posts: 3,429
|
Mine is mounted below the Wompus rack
MT
__________________
MT 2016 FLHP Psychiatric Ward FL VBA 936 |
![]() |
![]() |
#8 |
![]() Join Date: Jul 2007
Location: Peoples Republic of New York State
Posts: 15,154
|
You mounted your air horn on the back of your bike
![]()
__________________
Tim "TC" Conley VBA #9 2011 Victory Kingpin mine 2013 Victory Boardwalk -hers [LEFT][COLOR=#000000] [SIZE=4] |
![]() |
![]() |
#9 |
Member
Join Date: Jun 2013
Location: Rosharon,Texas
Posts: 147
|
![]()
I mounted a Woolo Bad Boy, air horn in the stock horn position,under the neck at the top of the radiator,, on my '12 Nomad. 16,000 miles and many, many horn blast later, no problems.
Last edited by Tynker; 05-10-2014 at 06:23 PM.
|
![]() |
![]() |
#10 |
Member
Join Date: Nov 2009
Location: Lititz, PA
Posts: 432
|
Replaced the stocker with a Bad Boy using the same location. Works great. (Wire it directly and use a relay)
__________________
Yoda VBA #01311 SCRC Chapter 289 07 Nomad |
![]() |
![]() |
#11 |
Advanced Member
Join Date: Sep 2013
Location: South Windsor, CT
Posts: 735
|
Not sure where your horn is on your 1700 Neil, my Stebel mounted on the oem horn bracket. I bought a pre wired harness direct off the battery and the length just made it.
__________________
VBA #02482 VROC # 36172 |
![]() |
![]() |
#12 |
![]() Join Date: Jun 2013
Location: South Shore, MA
Posts: 4,629
|
Do you have a pic of it? If radiator service had to be done would the horn have to be removed? Which Wolo model number did you use?
__________________
VBA # 02424 VROC # 35971 2010 Nomad 1700 Metallic Diablo Black/Metallic Titanium |
![]() |
![]() |
#13 |
![]() Join Date: Jun 2013
Location: South Shore, MA
Posts: 4,629
|
It's under the neck. The same spot as Tynker's.
__________________
VBA # 02424 VROC # 35971 2010 Nomad 1700 Metallic Diablo Black/Metallic Titanium |
![]() |
![]() |
#14 |
![]() Join Date: Jan 2009
Location: Psychiatric Ward FL
Posts: 3,429
|
Sure did.
It just makes sense. It's protected from most of the weather, it's a great mounting bracket, and I was able to leave the stockers in place. And think about it, what difference is 20" front to back placement going to make to the sound? Not one bit! MT
__________________
MT 2016 FLHP Psychiatric Ward FL VBA 936 |
![]() |
![]() |
#15 |
![]() Join Date: Oct 2010
Location: Roswell, GA
Posts: 888
|
I have a Chucksters breather on mine and have removed the left side dog bowl so I just reused the bracket for the horn. Right between the jugs.
__________________
2008 Nomad 1600 Black/Red _________________________________________ VulcanBagger #01711, VRA/GA VRA, SCRC, VROC #29671, AMA #1085989, Red Knights MC GA-18 Pres, PGR _________________________________________ |
![]() |