Tool storage

[24racefan]

2010 nomad. Was looking for a way to store a few more tools on the bike and would like to keep it water tight so they don't rust. Don't want them bouncing around in the side bag so I was thinking maybe a pvc pipe with screw off lid. Could mount it under the rear rack tucked up by the back rest maybe. Input???

[ringadingh]

I'll carry a couple extra tools when I'm going on an extended trip, just because I feel better having them. But in reality Ive never needed any tools with me while on the road.
A tool roll is a good way of keeping a few tools together.

[cnc]

I carry quite a few tools, sockets, ratchets, pliers, extra wrenches etc in a men's zip up type toiletry bag and keep it in one of the saddle bags. Stays dry, doesn't take up much space, etc, so it works for me.

[coacha]

On long trips, I usually pack a tool bag and put it in our trailer. When solo, it goes in the left saddle bag; other saddle bag is for clothes and computer.

[canuckrider]

Depending on the size you need, this might work for you:

http://www.agrisupply.com/operator-m...ister/p/67670/

I just orderd two of these with the intent of putting a MSR 30 0z. fuel bottle in each one to carry extra fuel on an upcoming trip to SE Utah this summer.

Might look a little better than trying to fab something out of PVC pipe and this already has the mounting tabs. I've read on another forum that the yellow imprint on it will come off easily with some acetone (finger nail polish remover).

Another option could be a welding rod tube. They seem to be about the same diameter as these but a little longer, about 15"..

[cactusjack]

Originally Posted by 24racefan

2010 nomad. Was looking for a way to store a few more tools on the bike and would like to keep it water tight so they don't rust. Don't want them bouncing around in the side bag so I was thinking maybe a pvc pipe with screw off lid. Could mount it under the rear rack tucked up by the back rest maybe. Input???

Get a tool roll. You can buy rolled tool kits from Cruz.
http://cruztools.com/products/kitsmetric.html

Or you can buy empty tool rolls at Harbor Freight. I have a Cruz Roadtech M3, which is for metric bikes. When I bought my Harley I bought some SAE tools to replace the metric ones.

[recumbentbob]

They are called "Stash Tubes".

[trip]

You might consider this.....

Install a windshield bag at the back of your Nomad? That's right. Between the back seat and license plate is an area perfectly suited for a windshield bag. All you need is about 15 minutes, metric wrenches and a windshield bag and you've got a nicely tucked-away storage compartment at the back of your Nomad. Just take your license plate off and the plastic holder that has the three bolts running through it. Carefully drill a hole at the back of the windshield bag to allow the top bolt to go through. Slip the bolt through the license holder into the back of the bag and bolt on. You can secure the bag with the top bolt or all three bolts. Once done, you have an extra storage compartment that's hidden away behind your seat and below your sissy bar.

[jlreeves]

I was going to suggest the same exact thing. I removed my windshield bag when I got my bike but didn't want to throw it out. I just by dumb luck tried it and it fits great between the read Mustang seat and the license bracket. I carry real tools, glasses case, cell, etc all fit in and it is securely wedged in.

[24racefan]

Thanks to all for the replys now I have to go do a little shopping.

[Pitchinguy]

Remember the "fannie packs" that were all the rage 10 yrs ago? All the fitness buffs & joggers had em. You can still get em at Walmart, Roses etc for $5-$10. I've got a couple & they make great tool bags. The straps are adjustable & you can strap em onto your passenger backrest just below the cushion or anywhere else you choose. They work good & don't look at all bad either! Now that I have a trunk, I just keep them in the left side bag under my rain gear. Don't take up much room, keep the tools together & are a cheap fix.

[zoom45]

I got a small canvas tool bag at Lowes. It fits perfect in the bottom of the saddle bag and doesn't push against the door.
Zoom45

[Jared]

Here we are riding big baggers, with more storage than most bikes and we're considering a PVC pipe under the luggage rack?

Why not just put them in the bags? If they bounce around, put a sweat shirt on top of them.

Seems like we're over thinking the obvious.

[usranger74]

I carry a tool bag/kit with tools that both Mac and Scott recommended. If I ever need the tools, I hope someone is with me that knows how to use them cuz I lack the skills to "fix" things

[Monkeyman]

Originally Posted by usranger74

If I ever need the tools, I hope someone is with me that knows how to use them cuz I lack the skills to "fix" things

That's why I don't bother to carry any tools other than the stock tool kit. I probably wouldn't know how to use 'em. I'd be better off carrying a spare cell phone battery and a compass.