Clutch push rod seal part number

**Cajunrider** · 06-05-2011, 07:49 PM

Anybody know the part number for the clutch push rod seal. I have a 2007 and would like to have a spare on hand just in case mine would happen to slip in like others have. I'd hate for this to happen on a long trip such as to the National Rally. I looked on a couple of parts fisches and don't see it.

AlabamaNomadRider · 06-05-2011, 08:25 PM

I checked at Cheapcycleparts.com and didn't see it either Mitch. I will let you know if I locate the number.

mikeyger · 06-05-2011, 08:26 PM

I took a look foy you but I can't even find synmatic for the slave cylinder or where it is. I know I have seen it somewhere My mind is blank!

AlabamaNomadRider · 06-05-2011, 08:34 PM

Does part number 92049 sound like it could be the right number. I was looking on Bikebandit at clutch parts and said oil seal and gave that number.

**MAS Tequila** · 06-05-2011, 09:26 PM

Mfg. Part Number: 92049-1017

Ron Ayers $3.85

MT

**Cajunrider** · 06-05-2011, 09:42 PM

Thanks. I'll get one on order tonight.

cactusjack · 06-05-2011, 10:53 PM

For the benefit of others, it can be found on the "front bevel gear" page of the parts fiche.

**Cajunrider** · 06-06-2011, 08:41 AM

Thanks Scott. I believe that's the only engine fiche I didn't look in. Rider's Choice required a minimum $15 order. I went ahead and ordered the push rod seal, final drive fill o-ring and drain gasket, and the oil screen o-ring to bring the order up. It will be good to have those assorted gaskets and o-rings because the dealer doens't normally stock those "rarely used" items.

cactusjack · 06-06-2011, 09:32 AM

Quote:

Originally Posted by Cajunrider

Thanks Scott. I believe that's the only engine fiche I didn't look in. Rider's Choice required a minimum $15 order. I went ahead and ordered the push rod seal, final drive fill o-ring and drain gasket, and the oil screen o-ring to bring the order up. It will be good to have those assorted gaskets and o-rings because the dealer doens't normally stock those "rarely used" items.

That's kind of what I used to do. When I ordered something from Cheap Cycle Parts, I'd pick up exhaust gaskets, o-rings, etc., because they were already raping me for shipping and a few additional items didn't cost any more to ship.

ccmjr77 · 06-06-2011, 09:54 AM

Here is a pretty good write up that I found for this install. It also has the part number, but I see it was already found.

http://home.insightbb.com/~kpmh.010/...h-Rod-Seal.htm

Dave · 06-06-2011, 10:18 AM

Why not just buy it from the dealer?

VulcanE · 06-06-2011, 11:00 AM

Quote:

Originally Posted by Dave

Why not just buy it from the dealer?

There's 2 reasons, 1) he would have to order it anyways, because they don't keep them in stock, so the wait time will be about the same, and 2), you'll pay more at the dealer for the same part.

cactusjack · 06-06-2011, 11:26 AM

Quote:

Originally Posted by Dave

Why not just buy it from the dealer?

Walk into most Kaw dealers and ask for this part number and you'll get back a blank stare.

macmac · 06-06-2011, 02:17 PM

Order 40 and make a necklace fer yer Bride.

**BudMan** · 06-06-2011, 05:31 PM

Quote:

Originally Posted by cactusjack

Walk into most Kaw dealers and ask for this part number and you'll get back a blank stare.

Walk in to Fat Alberts in Poteau and ask anything, you'll get that blank stare.

06-05-2011, 07:49 PM	#1
Cajunrider Join Date: Apr 2008 Location: (SE Louisiana) Posts: 8,340	Clutch push rod seal part number Anybody know the part number for the clutch push rod seal. I have a 2007 and would like to have a spare on hand just in case mine would happen to slip in like others have. I'd hate for this to happen on a long trip such as to the National Rally. I looked on a couple of parts fisches and don't see it. __________________ 2016 Electra Glide Ultra Limited CVO Palladium Silver / Phantom Blue 110 cu in SE 2012 Electra Glide Ultra Limited (Traded 6/22/16) Tequila Sunrise / HD Orange Vance & Hines true dual headers Rinehart 4" slip ons Screamin Eagle Super Tuner Screamin Eagle Stage 1 intake Dyno tuned H.O.G.# 4514015 2007 Nomad 1600 (Traded 6/23/12) VBA #482 Login or Register to Remove Ads
	0

06-05-2011, 08:25 PM	#2
AlabamaNomadRider Sr. Contributor Join Date: Jul 2009 Location: Boaz, Alabama Posts: 13,742	Clutch push rod seal part number I checked at Cheapcycleparts.com and didn't see it either Mitch. I will let you know if I locate the number. __________________ Gene Cross, Jr. Boaz, Alabama KawaNOW/VBA #1181
	0

06-05-2011, 08:26 PM	#3
mikeyger Member Join Date: Aug 2010 Location: hermitage tenn Posts: 410	Clutch push rod seal part number I took a look foy you but I can't even find synmatic for the slave cylinder or where it is. I know I have seen it somewhere My mind is blank!
	0

06-05-2011, 08:34 PM	#4
AlabamaNomadRider Sr. Contributor Join Date: Jul 2009 Location: Boaz, Alabama Posts: 13,742	Clutch push rod seal part number Does part number 92049 sound like it could be the right number. I was looking on Bikebandit at clutch parts and said oil seal and gave that number. __________________ Gene Cross, Jr. Boaz, Alabama KawaNOW/VBA #1181
	0

06-05-2011, 09:26 PM	#5
MAS Tequila Join Date: Jan 2009 Location: Psychiatric Ward FL Posts: 3,429	Clutch push rod seal part number Mfg. Part Number: 92049-1017 Ron Ayers $3.85 MT __________________ MT 2016 FLHP Psychiatric Ward FL VBA 936 Login or Register to Remove Ads
	0

06-05-2011, 09:42 PM	#6
Cajunrider Join Date: Apr 2008 Location: (SE Louisiana) Posts: 8,340	Clutch push rod seal part number Thanks. I'll get one on order tonight. __________________ 2016 Electra Glide Ultra Limited CVO Palladium Silver / Phantom Blue 110 cu in SE 2012 Electra Glide Ultra Limited (Traded 6/22/16) Tequila Sunrise / HD Orange Vance & Hines true dual headers Rinehart 4" slip ons Screamin Eagle Super Tuner Screamin Eagle Stage 1 intake Dyno tuned H.O.G.# 4514015 2007 Nomad 1600 (Traded 6/23/12) VBA #482
	0

06-05-2011, 10:53 PM	#7
cactusjack Mega-Contributor Join Date: Sep 2007 Location: Where it doesn't snow...ever! Posts: 21,926	Clutch push rod seal part number For the benefit of others, it can be found on the "front bevel gear" page of the parts fiche. __________________ Scott "Cactusjack" Hanks VBA #00105 H.O.G. #4250060 2011 H-D Ultra Limited 103ci :: 2011 HD Electra Glide Ultra Limited w/Stage 1 :: Rallies: Mesquite '08\|Custer '09\|Cortez '10\|Crescent City '11\|Kanab '12\|Antlers '12\|Estes Park '13\|Antlers '13\|Orofino '14\|The Dalles '17
	0

06-06-2011, 08:41 AM	#8
Cajunrider Join Date: Apr 2008 Location: (SE Louisiana) Posts: 8,340	Clutch push rod seal part number Thanks Scott. I believe that's the only engine fiche I didn't look in. Rider's Choice required a minimum $15 order. I went ahead and ordered the push rod seal, final drive fill o-ring and drain gasket, and the oil screen o-ring to bring the order up. It will be good to have those assorted gaskets and o-rings because the dealer doens't normally stock those "rarely used" items. __________________ 2016 Electra Glide Ultra Limited CVO Palladium Silver / Phantom Blue 110 cu in SE 2012 Electra Glide Ultra Limited (Traded 6/22/16) Tequila Sunrise / HD Orange Vance & Hines true dual headers Rinehart 4" slip ons Screamin Eagle Super Tuner Screamin Eagle Stage 1 intake Dyno tuned H.O.G.# 4514015 2007 Nomad 1600 (Traded 6/23/12) VBA #482
	0

06-06-2011, 09:54 AM	#10
ccmjr77 Advanced Member Join Date: Aug 2007 Location: Anthem, AZ Posts: 642	Clutch push rod seal part number Here is a pretty good write up that I found for this install. It also has the part number, but I see it was already found. http://home.insightbb.com/~kpmh.010/...h-Rod-Seal.htm __________________ ccmjr77 2007 Kawasaki Nomad 1600
	0

06-06-2011, 10:18 AM	#11
Dave Sr. Member Join Date: Dec 2007 Location: Itchycoo Park Posts: 3,422	Clutch push rod seal part number Why not just buy it from the dealer?
	0

06-06-2011, 02:17 PM	#14
macmac Sr. Contributor Join Date: Apr 2008 Location: Tamworth New Hampster 06 1600 Posts: 12,484	Clutch push rod seal part number Order 40 and make a necklace fer yer Bride. __________________ 06 1600 Nomad Just call me Mac molon labe come and get it
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch push rod seal	Jared	1500 & 1600 Nomad	6	07-06-2011 07:22 PM
Clutch Rod Oil Seal Lost	jonsamson	1500 & 1600 Nomad	21	01-13-2011 11:38 AM
Clutch Push Rod Gasket	fakebikerdude59	Vulcan Nomad/Vaquero/Voyager	10	08-23-2010 11:56 PM
Spark Plug part number	phenrichs	1500 & 1600 Nomad	16	05-22-2009 03:14 PM
Final drive oil seal part#?	redeye	1500 & 1600 Nomad	8	12-30-2008 08:39 PM