Kuraykyn Tripple Whammy Run-turn-brake for sale

[jandreu]

I decided to change my rear lights to 1157 bulbs so no longer need the TW run-turn-brake controller. This is the plug and play unit #4615 as listed in this link;

http://www.kuryakyn.com/index.cfm/go...ID/39/IMID/734

Like new with instructions. Kuraykyn sells it for $93.99 plus shipping. You can find it at other online parts houses for around $80 plus shipping.

I'm selling for $70 including shipping to US or Canada.

[trosco]

where did you find the sockets to put in your rear signal housing to convert to dual filament bulbs or did you switch to some other unit.

[jandreu]

Sorry, posted this on the wrong board by mistake.

[jandreu]

Trosco,
Found some 1157 sockets at the local auto parts store. NAPA store. Do not remember the part number but they have a spring clip built into them that press fits into the plastic base in the stock lights. With a little silicon they work perfect. Wired them as run - turn only as I already have extra brake lights.

[jandreu]

Here's the link to the socket I used if anyone is interested;

http://www.napaonline.com/Search/Det...114_0213824954

The spring clip fits the plastic base in the signal housing after the stock socket is removed. Press fits nicely and with a little silicon to keep it from vibrating loose it works perfect. Have had mine in for a few months and no issues.

[Dave]

Originally Posted by James "Bubba" Andreu

Sorry, posted this on the wrong board by mistake.

Oh my God! The board police are going to have a field day with you!

[jandreu]

As long as the board police use fur lined handcufs I'm a happy camper.

On the link to the NAPA part click the shop on line button and it will take ya to the part listing.

[jandreu]

Bump

[cnc]

Originally Posted by James "Bubba" Andreu

Here's the link to the socket I used if anyone is interested;

http://www.napaonline.com/Search/Det...114_0213824954

The spring clip fits the plastic base in the signal housing after the stock socket is removed. Press fits nicely and with a little silicon to keep it from vibrating loose it works perfect. Have had mine in for a few months and no issues.

Interesting. They have them listed as a back up light socket, which would only be a single filament bulb usually 1156, but show the socket for a duel filament 1157.