|
|
05-27-2017, 12:11 PM
|
#1 |
|
Jr. Member
Join Date: Feb 2013
Location: Tallahassee
Posts: 9
|
No Fuel Pump, No Spark....
Okay, okay... so it's a 2002 1500 Drifter, but my Chilton's says it's really like a Nomad!
My ignition switch took a dump, would only work in a "half-way" setting for everything to work. And not really wanting to have TWO keys for everything, I wired in a 50 amp toggle switch in a secret location, leaving the now dummy ign switch to throw off the predators. So, white is hot, brown and gray go to the important stuff and red and blue work lighting (independent of everything, so those can just be permanently mated and tie into the system down the line... So, everything should work? Nope, NO fuel pump nor spark! I checked and rechecked connections and have power going to the fuel pump regulator. I'm gonna order a new ign switch BUT WOULD RATHER NOT! Anybody out there in Bagger Land have this issue? I'd hate to think I fried the ECM.... Thanks! Harry Login or Register to Remove Ads |
|
|
05-27-2017, 01:41 PM
|
#2 |
|
Sr. Member
Join Date: Mar 2009
Location: Newburgh IN
Posts: 3,404
|
Read this thread all the way thru.
If your bike has the resister that is your problem. You bypassed it. http://vulcanbagger.com/forums/showthread.php?t=45990
__________________
VBA #01084
"A well regulated militia being necessary to the security of a free State, the right of the People to keep and bear arms shall not be infringed." |
|
|
|
05-27-2017, 04:58 PM
|
#3 |
 Join Date: Oct 2013
Location: chandler okla
Posts: 854
|
Resistor
|
|
|
|
05-28-2017, 12:45 AM
|
#5 | |
|
Sr. Member
Join Date: Jul 2016
Location: Somewhere South of Alaska....
Posts: 2,351
|
Quote:
__________________
 --------------------- Don't start no schit, there won't be no schit.... *My Sarcasm is directly proportional to the amount of Stupidity involved* --------------------- VBA#03239 VROC#37400 VRA --------------------- 2014 Vaquero 2001 Nomad FI 2003 Street Glide (sold) 1500 Meanie, fresh rebuild (sold) 90s BUBF Bobber (sold) 2001 UltraCycle FatPounder (Sold) 1975 HD ElectraGlide (Sold) 1982 Kawasaki Z1 Chopper (Sold) Suck It Up & Ride! 
Login or Register to Remove Ads |
|
|
|
|
05-28-2017, 07:59 AM
|
#6 |
|
Join Date: Oct 2013
Location: chandler okla
Posts: 854
|
The orig was built inside Your stock switch !
|
|
|
|
05-28-2017, 08:06 AM
|
#7 |
 
Join Date: Aug 2007
Location: Newmarket Ontario Canada
Posts: 35,387
|
Get a new ignition switch.
__________________
 2002 Nomad aka Bountyhunter VBA #27 VROC #18951 |
|
|
|
05-30-2017, 08:36 AM
|
#9 |
Join Date: Jan 2009
Location: Psychiatric Ward FL
Posts: 3,429
|
Just solder in a 100 ohm resistor on the gray wire.
You'll need it with the HD switch anyhow.
__________________
MT 2016 FLHP Psychiatric Ward FL VBA 936 |
|
|
Linear Mode
