7inch Led headlamp

[Clintonwrght]

Anyone have any idea if this would be compatible to put in a 2014 vaquero.

http://www.ebay.com/itm/201496428075

Sent from my SM-N920V using Tapatalk

[Sabre-t]

Yes, I think it would. I don't see anything about it that would prevent it from fitting.

[Demolition Man]

Looks the same like the expensive one from JW Speaker, so I would buy this in a heartbeat, but to our law here in germany, I must have one which got an ECE mark. DOT /SAE only is not accepted here by law.

Cu,
Sven

[Clintonwrght]

Ok. Thanks. I'm going to order and let you know how it goes

Sent from my SM-N920V using Tapatalk

[Lumberjack]

I noticed it only puts out 1800 lumens which is much less than EVO and not very good IMO. Superbright LED carries their own knock off now and it puts out more than EVO at 3800 lumens and only $180. I really like their products and I have purchased it but haven't mounted yet. You do know you have to butcher your mounting bracket and purchase a trim ring.

Originally Posted by Clintonwrght

Anyone have any idea if this would be compatible to put in a 2014 vaquero.

http://www.ebay.com/itm/201496428075

Sent from my SM-N920V using Tapatalk

[Clintonwrght]

Originally Posted by Lumberjack

I noticed it only puts out 1800 lumens which is much less than EVO and not very good IMO. Superbright LED carries their own knock off now and it puts out more than EVO at 3800 lumens and only $180. I really like their products and I have purchased it but haven't mounted yet. You do know you have to butcher your mounting bracket and purchase a trim ring.

Oh ok. Most of the ones I looked at on ebay had 1800 lumens for low beam and 3800 for high beams. So I want 3800 lumens for my low beams

Sent from my SM-N920V using Tapatalk

[Lumberjack]

No, you should be good then. From what I have read some of the knock offs aren't as good as the real thing. Best of luck with the headlight and please report back. If you can show the beam pattern on a wall that would be great to compare yours vs mine later on.

Originally Posted by Clintonwrght

Oh ok. Most of the ones I looked at on ebay had 1800 lumens for low beam and 3800 for high beams. So I want 3800 lumens for my low beams

Sent from my SM-N920V using Tapatalk

[kpmhspirit]

Originally Posted by Clintonwrght

Oh ok. Most of the ones I looked at on ebay had 1800 lumens for low beam and 3800 for high beams. So I want 3800 lumens for my low beams

Double check. If you scroll down it says you get 1800 @30W and 2100 @ 40W.

Originally Posted by Lumberjack

No, you should be good then. From what I have read some of the knock offs aren't as good as the real thing. Best of luck with the headlight and please report back. If you can show the beam pattern on a wall that would be great to compare yours vs mine later on.

I assume the one you are referring to is this one:

https://www.superbrightleds.com/more...#/tab/Overview

I'm having difficulty envisioning how to mount this. Which trim ring did you get to try to make it work?

Thanks,

[Lumberjack]

Do a search there is s good thread about installing. Yes that is the one I purchased - they had a discount day and got about 10-15% off.

Originally Posted by kpmhspirit

I assume the one you are referring to is this one:

https://www.superbrightleds.com/more...#/tab/Overview

I'm having difficulty envisioning how to mount this. Which trim ring did you get to try to make it work?

Thanks,

[Clintonwrght]

So you have to buy a mounting bracket also to install these lights?

Sent from my SM-N920V using Tapatalk

[kpmhspirit]

Originally Posted by Clintonwrght

So you have to buy a mounting bracket also to install these lights?

Sent from my SM-N920V using Tapatalk

I think this may be the thread and parts Lumberjack is referring to

http://www.vulcanbagger.com/forums/s...ight=headlight