Just a little note on the LED aux lights

[smokey]

If you are replacing the aux lights on the Voyager with LED Harley light, just be aware that the wires from the Harley LED are reversed, you can use the socket it comes with after a slight trimming of the locking part, but the wires need to be cut, and the red becomes the ground and the black becomes live. That is because the connector on the bike is compatible but the wires are reverse to Harley.

[Old Bear]

Hey Smokey, long time! The lights you are referring to, are they for mounting in the fairing? First I've heard of them if so. And if so, ya got any more information on them? I would like to take a look.

[smokey]

Originally Posted by Old Bear

Hey Smokey, long time! The lights you are referring to, are they for mounting in the fairing? First I've heard of them if so. And if so, ya got any more information on them? I would like to take a look.

They are the ones Harley makes, you have to convert the housing for the stock OEM lights in order to make them fit, a lot of work, about 5 hours per light. About $600 invested as you have to butcher the oem housings, which means if you sell the bike and don't want to leave the LED in you have to purchase new housings.

I just got the phase 7 installed in place of the phase 6 that were in there before, got somebody interested in the old ones but if that falls through I will advertise them for sale.