Register FAQ Upgrade Membership Community Calendar Today's Posts Search
Go Back   Vulcan Bagger Forums > Technical :: Maintenance :: Performance > Vulcan Nomad/Vaquero/Voyager

Reply
 
Thread Tools Search this Thread Display Modes
Old 11-16-2013, 03:35 PM   #1
Warlock   Warlock is offline
Jr. Member
 
Join Date: Aug 2013
Location: Magnolia, Ms
Posts: 24
Pictures of trunk removal

Took my trunk off yesterday and today played around and made it real easy to put back on. Took and cut my strut covers and made a bracket and installed it where the rear trunk rack mounts. Then made a piece out of aluminum and mounted it over the opening where I cut it. Now to mount it back remove the 4 bolts on each strut cover and bolt the trunk on and mount the strut covers back on. Plug in the brake light, antenna, and plug the rear speakers back up. Will probably take about 1/2 hr to put it back on. Haven't taken any pictures yet.
You can see the brackets which bolts to the bolt at the rear that holds the trunk brace. Also where I cut the strut cover on the bike and the 2 aluminum pieces I made and polished. They shine more than the picture shows.
david



Login or Register to Remove Ads
 
Reply With Quote
Reply





Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.