Nomad parts for those looking

[BagginAndStreakin]

When I purchased my '99 Nomad, the previous owner had laid it down on the left side. I went about replacing all the parts that were damaged, but continued to mod beyond that. Most of the parts are used, some more than others. There are also some good and new condition aftermarket parts as well. I'm merely putting this out there in case anyone needs something. I'm more interested in helping someone in need than trying to make a bunch of money. All items are [B]BEST OFFER[B/], first come-first served: meaning, I'm not starting a bidding thing. First person expressing interest-through settling on a price-has dibs. All items will be shipped with the buyer reimbursing actual shipping cost. I prefer PayPal. I will post 1 picture of each item in the following posts, in order they're listed. I will update this list as each item is sold, so it will always be current. With all that out of the way, here goes.

OEM Nomad parts:
1)Two up seat set. One small stitch has popped, beyond that they're in great shape.
2)Windshield and lower brackets, (only lower plastic, no windshield plastic). Some light rust on backs, I've used these till I just replaced the whole setup. The badge has been sold off the main front piece.
3)
4)Front brake calipers, each with individual hose. Got a deal on some front end parts and these came with the deal. I never installed them.
5)
6)
7)Chrome headlight, complete.
8)Floorboards-Driver and Passenger.
9)Driver floorboard mounts.
10)2 sets of coils and wires, with frame clips.
11)Indicator panel with lights.
12)
13)
14)Chrome brake pedal, PO twisted to the left to give more foot room, but lines up and works just fine. I just put a longer one on.
15)Radiator mesh screen.
16)Radiator, top bracket broken off.
17)Chrome kickstand.
18)Left side chrome engine cover and inner black cover. Chrome cover has light scuffs from foot wear.
19)
20)Oil cap, some use marks.
21)Chrome fork cap covers, light pitting.
22) New headlight rubber boot.
23) Various signal parts: Amber covers, internal reflectors, single filament sockets.

Aftermarket parts:
1)Chrome inner cover for '98 or older 1500. It doesn't have the chrome ring on the bottom left corner that goes around the shifter shaft, not contoured to hug the front cylinder, and doesn't have hump on forward curve where wiring runs. Maybe you could modify it to fit. No guarantee as to fit.
2)Large mirrors.
3)
4)
5)

Parts from my '05 Mean Streak that will cross over:
1)Polished aluminum brake and clutch levers.
2)Polished aluminum switch housings. NOTE: Throttle cables come out of back of housing, not bottom.

Ok, I'm going to post pictures following, in order. If something is pictured, but isn't listed here, it may already be gone. Thanks for looking!

[BagginAndStreakin]

ImageUploadedByTapatalk1365986929.917781.jpgImageUploadedByTapatalk1365986958.802803.jpgImageUploadedByTapatalk1365986983.856456.jpgImageUploadedByTapatalk1365987004.382126.jpgImageUploadedByTapatalk1365987109.543745.jpg

[BagginAndStreakin]

ImageUploadedByTapatalk1365987137.142820.jpgImageUploadedByTapatalk1365987227.656196.jpgImageUploadedByTapatalk1365987247.294891.jpgImageUploadedByTapatalk1365987270.997254.jpgImageUploadedByTapatalk1365987285.868306.jpg

[BagginAndStreakin]

ImageUploadedByTapatalk1365987349.734925.jpgImageUploadedByTapatalk1365987421.931413.jpgImageUploadedByTapatalk1365987438.866260.jpgImageUploadedByTapatalk1365987454.848130.jpgImageUploadedByTapatalk1365987508.226173.jpg

[BagginAndStreakin]

ImageUploadedByTapatalk1365987546.676905.jpgImageUploadedByTapatalk1365987558.128241.jpgImageUploadedByTapatalk1365987569.412211.jpgImageUploadedByTapatalk1365987595.645578.jpgImageUploadedByTapatalk1365987612.228683.jpg

[BagginAndStreakin]

ImageUploadedByTapatalk1365987631.262027.jpgImageUploadedByTapatalk1365987713.359538.jpgImageUploadedByTapatalk1365987742.245491.jpgImageUploadedByTapatalk1365987759.642591.jpgImageUploadedByTapatalk1365987780.233543.jpg

[BagginAndStreakin]

ImageUploadedByTapatalk1365987839.620951.jpgImageUploadedByTapatalk1365987849.175105.jpgImageUploadedByTapatalk1365987893.800572.jpgImageUploadedByTapatalk1365987921.372064.jpgImageUploadedByTapatalk1365987961.889510.jpg

[BagginAndStreakin]

ImageUploadedByTapatalk1365988029.657581.jpgImageUploadedByTapatalk1365988038.825316.jpgImageUploadedByTapatalk1365988068.914707.jpgImageUploadedByTapatalk1365988099.408874.jpgImageUploadedByTapatalk1365988115.020806.jpg

[BagginAndStreakin]

ImageUploadedByTapatalk1365988165.817149.jpgImageUploadedByTapatalk1365988178.772598.jpgImageUploadedByTapatalk1365988226.134798.jpgImageUploadedByTapatalk1365988250.838052.jpgImageUploadedByTapatalk1365988275.697735.jpg

[BagginAndStreakin]

ImageUploadedByTapatalk1365988325.457662.jpgImageUploadedByTapatalk1365988344.615040.jpgImageUploadedByTapatalk1365988361.539763.jpgImageUploadedByTapatalk1365988378.150443.jpg

[BudMan]

PM sent on inside cover

[minst7877]

PM sent

DC

[Jared]

PM sent. :)

[BagginAndStreakin]

For those who have inquired:

After looking closer at the chrome inner, comparing it to the black inner I removed, there are a few differences.
1)Doesn't have lower left trim around shift peg.
ImageUploadedByTapatalk1366026896.985220.jpg
2)Doesn't have contour for front cylinder.
ImageUploadedByTapatalk1366027002.929389.jpg
3)Doesn't have hump in forward curve where our wiring chases.
ImageUploadedByTapatalk1366027065.182166.jpgImageUploadedByTapatalk1366027075.008407.jpg

If someone wants it to see if they can modify it to fit, I'll take offers. But there is no guarantee as to fitment.

Sorry for the confusion.

[Dean]

I do not have a Nomad, but I have sent a message about the passenger boards.
Thanks.