Pictures of Phat II Risers

eagleman · 11-11-2009, 03:48 PM

Would like to see what the Phat II risers look like installed on the Nomad. Anyone willing to share how these look installed on your bike would be greatly appreciated. Thanks.

Eagleman

dantama · 11-11-2009, 06:14 PM

Here's one view from a post I did showing a water bottle holder.

dolanz · 11-11-2009, 06:33 PM

wantakaw59 · 11-12-2009, 04:10 AM

Bike is lookin SWEEET Dolanz!! How much do ya charge to detail a bike???

dolanz · 11-12-2009, 09:43 AM

Quote:

Originally Posted by wantakaw59

Bike is lookin SWEEET Dolanz!! How much do ya charge to detail a bike???

Thanks, I like it when it is really clean and get some nice compliments. But boy, if it wasn't my bike it would be a pain. It really is a labor of love.

Netnorske · 11-12-2009, 10:41 AM

Here are a couple more.....

spirello · 11-12-2009, 11:53 AM

Sin City Stan · 11-12-2009, 08:26 PM

How about Phat 1X Risers

eagleman · 11-13-2009, 06:09 PM

Spirello shows a great close up of a picture of the Phatt II risers with the offset holes. I have +2 inch cables to reinstall with the new risers. I want to use the center hole for more pull back - has anyone else used the center holes and if you have did you have any issues?

Eagleman

Netnorske · 11-13-2009, 06:20 PM

Quote:

Originally Posted by Eagleman

Spirello shows a great close up of a picture of the Phatt II risers with the offset holes. I have +2 inch cables to reinstall with the new risers. I want to use the center hole for more pull back - has anyone else used the center holes and if you have did you have any issues?

Eagleman

You want to use the offset holes for a 1600. It has more to do with the risers clearing the speedometer nacelle in a full turn than the pullback. You can see what I mean in my first photo above. If you used the center hole they would be very close to the nacelle housing in that turn position.

In most cases you should not have to change your cables/hoses to make the Phat II's work. Just pull all the slack out of them and in my case I slid the front brake housing up the handlebar about and inch (as you can see in my second photo)....worked great!

dantama · 11-13-2009, 06:58 PM

Quote:

Originally Posted by Netnorske

Quote:

Originally Posted by Eagleman

Spirello shows a great close up of a picture of the Phatt II risers with the offset holes. I have +2 inch cables to reinstall with the new risers. I want to use the center hole for more pull back - has anyone else used the center holes and if you have did you have any issues?

Eagleman

You want to use the offset holes for a 1600. It has more to do with the risers clearing the speedometer nacelle in a full turn than the pullback. You can see what I mean in my first photo above. If you used the center hole they would be very close to the nacelle housing in that turn position.

When my bike was disassembled to take the engine out for warranty work, I took my phattII's to be installed while they had everything apart. They told me they used the center holes.

It come very close to the nacelle, but doesn't hit.

I didn't see it done using the center holes with my own eyes, but they said that they used the center holes.

kpmhspirit · 11-13-2009, 08:42 PM

Quote:

Originally Posted by Eagleman

Would like to see what the Phat II risers look like installed on the Nomad. Anyone willing to share how these look installed on your bike would be greatly appreciated. Thanks.

Eagleman

http://home.insightbb.com/~kpmh.005/N-Risers.htm

Pete

eagleman · 11-14-2009, 03:44 PM

Want to thank all of you who have contributed so far. The pictures have been great and thanks to all of you have shared. If anyone else have some close up shots please feel free to share them. A special thanks to Pete for his detailed link that explained each step of the installation along with pictures. That was great. Thanks Pete and to all the rest of you.

Eagleman

11-11-2009, 03:48 PM	#1
eagleman Member Join Date: Jul 2009 Location: LAKEWOOD, CO Posts: 227	Pictures of Phat II Risers Would like to see what the Phat II risers look like installed on the Nomad. Anyone willing to share how these look installed on your bike would be greatly appreciated. Thanks. Eagleman __________________ Eagleman Chaplain CMA Chapter - Riders in the Light # 946 Lakewood, CO VBA# - 01172 2006 Vulcan Nomad Green/Silver But they that wait upon the Lord shall renew their strength. They shall mount up with wings like eagles: they shall run and not be weary; they shall walk and not faint - Isaiah 40:31 Login or Register to Remove Ads
	0

11-11-2009, 06:14 PM	#2
dantama Join Date: Dec 2007 Location: Denver, CO Posts: 0	Pictures of Phat II Risers Here's one view from a post I did showing a water bottle holder.
	0

11-11-2009, 06:33 PM	#3
dolanz Member Join Date: Oct 2008 Location: Tucson, Arizona Posts: 91	Pictures of Phat II Risers
	0

11-12-2009, 04:10 AM	#4
wantakaw59 Member Join Date: Oct 2009 Location: Austintown Ohio Posts: 104	Pictures of Phat II Risers Bike is lookin SWEEET Dolanz!! How much do ya charge to detail a bike???
	0

11-12-2009, 10:41 AM	#6
Netnorske Top Contributor Join Date: Aug 2008 Location: Everett, Washington Posts: 5,709	Pictures of Phat II Risers Here are a couple more..... __________________ *Kris Olsen* VBA #0691 2017 HD Ultra Limited Low 2013 Victory Cross Country Tour 2012 1700 Vulcan Voyager 2008 1600 Vulcan Nomad 1997 Vulcan 800 Classic *"Growing old is mandatory,* *but growing up is optional"* Custer 2009\|Kalispell 2010\|Cortez 2010\|Crescent City 2011\|Kanab 2012\|Canmore 2012\|Estes Park 2013\|Orofino 2014\|Lake Tahoe 2015\|Red Lodge 2016
	0

11-12-2009, 11:53 AM	#7
spirello Advanced Member Join Date: Jun 2007 Location: VANCOUVER WA Posts: 576	Pictures of Phat II Risers
	0

11-12-2009, 08:26 PM	#8
Sin City Stan Sr. Member Join Date: Mar 2009 Location: Henderson, NV Posts: 3,746	Pictures of Phat II Risers How about Phat 1X Risers __________________ Oldest Saloon In Nevada http://www.pioneersaloon.info/ "Sin City Stan" Henderson, NV VBA #01004 VROC #29365 2004 Nomad 1500L5 +100 "The Bike" 2009 Nomad 1700 (past) 2004 Vulcan Classic 800 (past) 2010 Cortez - 2011 Crescent City - 2012 Kanab - 2013 Estes Park
	0

11-13-2009, 06:09 PM	#9
eagleman Member Join Date: Jul 2009 Location: LAKEWOOD, CO Posts: 227	Pictures of Phat II Risers Spirello shows a great close up of a picture of the Phatt II risers with the offset holes. I have +2 inch cables to reinstall with the new risers. I want to use the center hole for more pull back - has anyone else used the center holes and if you have did you have any issues? Eagleman __________________ Eagleman Chaplain CMA Chapter - Riders in the Light # 946 Lakewood, CO VBA# - 01172 2006 Vulcan Nomad Green/Silver But they that wait upon the Lord shall renew their strength. They shall mount up with wings like eagles: they shall run and not be weary; they shall walk and not faint - Isaiah 40:31
	0

11-14-2009, 03:44 PM	#13
eagleman Member Join Date: Jul 2009 Location: LAKEWOOD, CO Posts: 227	Pictures of Phat II Risers Want to thank all of you who have contributed so far. The pictures have been great and thanks to all of you have shared. If anyone else have some close up shots please feel free to share them. A special thanks to Pete for his detailed link that explained each step of the installation along with pictures. That was great. Thanks Pete and to all the rest of you. Eagleman __________________ Eagleman Chaplain CMA Chapter - Riders in the Light # 946 Lakewood, CO VBA# - 01172 2006 Vulcan Nomad Green/Silver But they that wait upon the Lord shall renew their strength. They shall mount up with wings like eagles: they shall run and not be weary; they shall walk and not faint - Isaiah 40:31
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Installing Phat II Risers	dcubed1988	1500 & 1600 Nomad	11	02-12-2011 06:34 PM
Phat 1x Risers	Sin City Stan	1700 Nomad, Vaquero & Voyager	3	08-29-2009 09:29 PM
Anyone with Phat II risers on a Nomad ?	ds06nomad	Vulcan Nomad/Vaquero/Voyager	30	08-09-2009 02:10 PM
Wanted- Phat II Risers	caper	Wanted	7	03-14-2009 08:31 PM
Phat 2 Risers	rickyboy	Parts & Accessories	0	02-25-2009 04:55 PM