I-Pod Mounts

chainsaw · 05-18-2009, 04:05 PM

??? ??? ???
I know we just discussed this, but could not remember where it was and the search didn't help. I am looking for an I-Pod Mount. Can ya'll help me out.
Thanks,
Al

**ringadingh** · 05-18-2009, 07:00 PM

Ram mounts are popular and there is a place in here in Ontario Canada that makes some really nice mounts, its called Burwell Fabricating I think.

ballast · 05-18-2009, 11:00 PM

Hey Al
I just ordered ram mounts from these guys. They got the stuff here very quickly for not much green.
http://www.expressmounts.com/

phenrichs · 05-19-2009, 09:59 AM

I found a full Ram mount for ipod on amazon.com for $26. that's half of the cost on the Ram site.

I just went to get the link and they are sold out of them. PM me if you want I can give you the link and they will notify you if it becomes available.

I would go with the link Ballast posted. That is a good price. and available.

gnomad · 05-19-2009, 09:19 PM

I have been trying to find a mount for an Ipod Nano 4th Generation and am having no luck. Emailed Ram mounts and they said they don't have one and none of their mounts will fit the 4th gen Nano. Does anyone else have the new Nano and found a way to mount it?

chainsaw · 05-19-2009, 09:33 PM

Try express mounts as per Charlies reply. I e-mailed them my information as far as the size of my MP-3 and they came up with a solution, and e-mailed me right back.

phenrichs · 05-20-2009, 08:06 AM

The dimensions of the G4 nano are only slightly smaller than the G2 nano. When I say slightly I mean it the g2 is 3.6 x 2 x 0.5 inches while the G4 is 3.5 x 1.5 x 0.3 inches.

I would bet that if you got one of those rubber or hard plastic proctective cases to put on your nano before you put it in the ram mount it would work.

The one I got was made for G1 - G5 while mine is a G4 i think it is thinner than the early models and if fits in the mount but there is a lot of extra room so I took a piece of rubber mat and cut it the same size as my ipod. I put the ipod in the mount and then slide the rubber in behind it to guarantee a tight fit that won't come loose if I hit a big bump.

Al is right too. IF you give them the dimensions of your device they will be able to tell you if they have an option that it will fit.

burkazoid · 05-20-2009, 10:53 AM

Quote:

Originally Posted by "CHAINSAW"

??? ??? ???
I know we just discussed this, but could not remember where it was and the search didn't help. I am looking for an I-Pod Mount. Can ya'll help me out.
Thanks,
Al

iPod? What is this "iPod" you speak of? It's pronounced "Zune", as in Zooooooooon!

kawgirl · 05-20-2009, 03:35 PM

This is a site the late Chuck Burt told me about. http://www.mountinginnovations.com/ I have not ordered anything from them. The owner was a good friend of Chuck's. That's more than enough reputation for me.

**ringadingh** · 05-20-2009, 04:33 PM

I found the link for the place I gave earlier http://www.burwellfabricating.com/

chainsaw · 05-20-2009, 10:40 PM

Thanks, sent them all an e-mail.

chainsaw · 05-26-2009, 09:43 AM

Good News, the economy must be on the rebound. All these companies I have e-mail must be really doing the business as they have not answered any of my e-mails. Whatever happened to customer service? A simple no we can't help you would be fine.

**ringadingh** · 05-26-2009, 04:26 PM

They just may be really to busy to answer right away, or at a bike show somewhere. I know that Burwell is just a one man show and has to do it all.

chainsaw · 05-27-2009, 10:06 PM

OK, will give it some time.

05-18-2009, 04:05 PM	#1
chainsaw Sr. Member Join Date: Jun 2008 Posts: 2,732	I-Pod Mounts ??? ??? ??? I know we just discussed this, but could not remember where it was and the search didn't help. I am looking for an I-Pod Mount. Can ya'll help me out. Thanks, Al Login or Register to Remove Ads
	0

05-18-2009, 07:00 PM	#2
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	I-Pod Mounts Ram mounts are popular and there is a place in here in Ontario Canada that makes some really nice mounts, its called Burwell Fabricating I think. __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951
	0

05-18-2009, 11:00 PM	#3
ballast Sr. Member Join Date: Mar 2009 Location: Orting, WA Posts: 1,394	I-Pod Mounts Hey Al I just ordered ram mounts from these guys. They got the stuff here very quickly for not much green. http://www.expressmounts.com/ __________________ Charlie "Ballast" Krogh 2005 1600 Nomad "Tangerine Dream" VBA #999 VROC #29355
	0

05-19-2009, 09:59 AM	#4
phenrichs Sr. Member Join Date: Jun 2008 Location: Sioux Falls, SD Posts: 2,498	I-Pod Mounts I found a full Ram mount for ipod on amazon.com for $26. that's half of the cost on the Ram site. I just went to get the link and they are sold out of them. PM me if you want I can give you the link and they will notify you if it becomes available. I would go with the link Ballast posted. That is a good price. and available.
	0

05-19-2009, 09:19 PM	#5
gnomad Member Join Date: May 2008 Location: Celina, Oh Posts: 97	I-Pod Mounts I have been trying to find a mount for an Ipod Nano 4th Generation and am having no luck. Emailed Ram mounts and they said they don't have one and none of their mounts will fit the 4th gen Nano. Does anyone else have the new Nano and found a way to mount it? Login or Register to Remove Ads
	0

05-19-2009, 09:33 PM	#6
chainsaw Sr. Member Join Date: Jun 2008 Posts: 2,732	I-Pod Mounts Try express mounts as per Charlies reply. I e-mailed them my information as far as the size of my MP-3 and they came up with a solution, and e-mailed me right back.
	0

05-20-2009, 08:06 AM	#7
phenrichs Sr. Member Join Date: Jun 2008 Location: Sioux Falls, SD Posts: 2,498	I-Pod Mounts The dimensions of the G4 nano are only slightly smaller than the G2 nano. When I say slightly I mean it the g2 is 3.6 x 2 x 0.5 inches while the G4 is 3.5 x 1.5 x 0.3 inches. I would bet that if you got one of those rubber or hard plastic proctective cases to put on your nano before you put it in the ram mount it would work. The one I got was made for G1 - G5 while mine is a G4 i think it is thinner than the early models and if fits in the mount but there is a lot of extra room so I took a piece of rubber mat and cut it the same size as my ipod. I put the ipod in the mount and then slide the rubber in behind it to guarantee a tight fit that won't come loose if I hit a big bump. Al is right too. IF you give them the dimensions of your device they will be able to tell you if they have an option that it will fit.
	0

05-20-2009, 03:35 PM	#9
kawgirl Sr. Member Join Date: Jan 2008 Location: Greenville, NC Posts: 2,729	I-Pod Mounts This is a site the late Chuck Burt told me about. http://www.mountinginnovations.com/ I have not ordered anything from them. The owner was a good friend of Chuck's. That's more than enough reputation for me. __________________ Amy "kawgirl" Neal Greenville, NC 2002 Nomad
	0

05-20-2009, 04:33 PM	#10
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	I-Pod Mounts I found the link for the place I gave earlier http://www.burwellfabricating.com/ __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951
	0

05-20-2009, 10:40 PM	#11
chainsaw Sr. Member Join Date: Jun 2008 Posts: 2,732	I-Pod Mounts Thanks, sent them all an e-mail.
	0

05-26-2009, 09:43 AM	#12
chainsaw Sr. Member Join Date: Jun 2008 Posts: 2,732	I-Pod Mounts Good News, the economy must be on the rebound. All these companies I have e-mail must be really doing the business as they have not answered any of my e-mails. Whatever happened to customer service? A simple no we can't help you would be fine.
	0

05-26-2009, 04:26 PM	#13
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	I-Pod Mounts They just may be really to busy to answer right away, or at a bike show somewhere. I know that Burwell is just a one man show and has to do it all. __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951
	0

05-27-2009, 10:06 PM	#14
chainsaw Sr. Member Join Date: Jun 2008 Posts: 2,732	I-Pod Mounts OK, will give it some time.
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Flag Mounts	zoom45	Parts & Accessories	1	12-01-2010 09:19 AM
Flag Mounts	Netnorske	Vulcan Nomad/Vaquero/Voyager	16	11-29-2009 02:57 PM
Intercom/Radio/I-pod	andrloni	Parts & Accessories	18	06-04-2009 05:43 AM
Flag Mounts?	bkmaxvrb	Vulcan Nomad/Vaquero/Voyager	13	01-07-2009 11:05 AM
Formotion power pod	dkdixie	Vulcan Nomad/Vaquero/Voyager	19	03-20-2008 10:06 AM