|
|
08-12-2020, 01:26 AM
|
#16 |
|
Jr. Member
Join Date: Aug 2010
Location: Southern, Calif
Posts: 43
|
Headlight lamp issue. High beam burnt out, regular beam works. Purchased a replacement bulb, but not sure how to replace it. The manual states that I have to take the fairing off? Is there an easier way? Any help would be appreciated. Pictures if possible.
Thanks in advance! Login or Register to Remove Ads |
|
|
08-12-2020, 01:36 PM
|
#17 |
|
Member
Join Date: Jan 2009
Posts: 496
|
No need to remove fairing. Take off trim ring around headlight by removing the black screw at the bottom of the trim ring and pull out. there are two prongs that fit into a rubber grommet at the top of the trim ring to hold it in place. Then remove the four bolts around the headlight, pull headlight out and loosen the wiring plug. Change out bulbs and reassemble in reverse order.
Good luck Pete |
|
|
|
08-14-2020, 06:26 AM
|
#18 |
 
Join Date: May 2015
Location: DBQ Iowa
Posts: 1,807
|
What Pete said: Easy, Cheesy, nice-n-easy... You oughta be done in 10 mins or less.
Ride safe, Smokier
__________________
You only get one, so "Make it the best day ever!" 2014 Victory Cross County Tour Blue Fire Gloss (BFG) "Cruella" Brides Ride: 2012 Victory Crossroads in Sunset Red "Ruby" Previous Vulcans: '15 Vaquero, '12 Vaquero, '10 1700 Nomad, '04 1500 Classic, '01 1500 Classic, '88 Vulcan 750 VROC # 10967 | VBA # 3115 
|
|
|
Linear Mode
