|
05-16-2017, 01:20 PM | #1 |
Join Date: Jun 2015
Location: Everett,WA.
Posts: 44
|
Wanna make my 1600 nomad louder
I've got an 07 1600 with V&H dual baggers, Dobek EJK, Chuckster K&N aircleaner, removed the smog stuff. I did remove some baffle insulation, tried all the insulation but noticed i lost some low end power, so i put some back on. I wonder if Rhienhards would fit, and if they'd be louder. Sadly i guess i want a Harley sound, i know i cant duplicate that, but more rumble without power loss would be great. Any bright ideas?....
Login or Register to Remove Ads |
|
05-16-2017, 01:24 PM | #2 |
Sr. Member
Join Date: Jul 2016
Location: Somewhere South of Alaska....
Posts: 2,351
|
V&H baggers with the Chucksters Ultimate baffles....as close as you can get....
__________________
--------------------- Don't start no schit, there won't be no schit.... *My Sarcasm is directly proportional to the amount of Stupidity involved* --------------------- VBA#03239 VROC#37400 VRA --------------------- 2014 Vaquero 2001 Nomad FI 2003 Street Glide (sold) 1500 Meanie, fresh rebuild (sold) 90s BUBF Bobber (sold) 2001 UltraCycle FatPounder (Sold) 1975 HD ElectraGlide (Sold) 1982 Kawasaki Z1 Chopper (Sold) Suck It Up & Ride! |
|
05-16-2017, 03:36 PM | #3 |
Sr. Member
Join Date: Jul 2016
Location: Somewhere South of Alaska....
Posts: 2,351
|
Now there is 1 low budget way that you can improve on your sound....
Yank your baffles out, take off all your packing, cut the baffle in half, then reinstall and enjoy! Then, if you need just a hair more rumble, go with the Chucksters Ultimate baffles.... You should've hear my Bobber Classic I have when I was experimenting, i used a set of cherry bomb mufflers on it. I had sand blasted all the chrome off, blasted the cherry bombs, painted it all with VHT Black, then wrapped them. Rode it over the cruise nite over in a local small town, all my friends were like 'holy crap! Now thats loud!' They said it sounded like a Harley on steroids.... It was loud enough I had trouble hearing my Sena Wireless....so....I went another route, after going on a 400 mile ride....it was a little too loud..... But....she ran like a spotted ape!
__________________
--------------------- Don't start no schit, there won't be no schit.... *My Sarcasm is directly proportional to the amount of Stupidity involved* --------------------- VBA#03239 VROC#37400 VRA --------------------- 2014 Vaquero 2001 Nomad FI 2003 Street Glide (sold) 1500 Meanie, fresh rebuild (sold) 90s BUBF Bobber (sold) 2001 UltraCycle FatPounder (Sold) 1975 HD ElectraGlide (Sold) 1982 Kawasaki Z1 Chopper (Sold) Suck It Up & Ride!
Last edited by DragonLady58; 05-16-2017 at 03:51 PM.
|
|
05-17-2017, 02:18 PM | #4 |
Member
Join Date: Jul 2015
Location: Webster MA
Posts: 188
|
I just installed a set of Big City Thunder baffles and took the stock v& h baffles and cut them back to just the disc on the end and reinstalled. Incredible sound. More pick up due to Big City Head pipe baffle. Sounds real nice. Thing about this is you can use the remaining other half of the stock baffle to quite it up a bit or trim a bit at a time till you get the sound where you like it.
__________________
2006 Nomad 1600 "Big Irish" BatWing Fairing 12" KST Mayhem Dresser Bars Demon Cycle Mirrors Tunes supplied by Pioneer and Polk Exhaust courtesy of Vance and Hines and Big City Thunder |
|
05-17-2017, 05:45 PM | #5 |
Sr. Member
Join Date: Jul 2016
Location: Somewhere South of Alaska....
Posts: 2,351
|
What he said! BCB's go up into the headpipes, which is extremely useful if you need more backpressure. Use them alot on like classics the have the bigshots or shotgun style pupes with no baffles....
__________________
--------------------- Don't start no schit, there won't be no schit.... *My Sarcasm is directly proportional to the amount of Stupidity involved* --------------------- VBA#03239 VROC#37400 VRA --------------------- 2014 Vaquero 2001 Nomad FI 2003 Street Glide (sold) 1500 Meanie, fresh rebuild (sold) 90s BUBF Bobber (sold) 2001 UltraCycle FatPounder (Sold) 1975 HD ElectraGlide (Sold) 1982 Kawasaki Z1 Chopper (Sold) Suck It Up & Ride! Login or Register to Remove Ads |
|
05-17-2017, 05:50 PM | #6 |
Member
Join Date: Apr 2011
Location: Dallas Texas
Posts: 353
|
Why? I have vance and hines baggers on my 1500 nomad and I am trying everything to get them quieter! I can dig anyone doing their own thing but be sure you really want to do it before you move forward!
|
|
05-17-2017, 06:09 PM | #7 |
Member
Join Date: Aug 2014
Posts: 113
|
1.75" inlet Harley pipes will work but you have to make an adapter bracket. That's my plan at some point
|
|
05-19-2017, 08:34 PM | #8 |
Jr. Member
Join Date: May 2012
Location: Wolfe City, TX
Posts: 24
|
I have v&h baggers with stock Harley mufflers and they sound great. Not as loud as the baggers though.
__________________
2004 Nomad 1500 |
|
05-19-2017, 10:18 PM | #9 |
Sr. Member
Join Date: Mar 2010
Location: Tallahassee FL
Posts: 1,035
|
Has anyone put a bolt through the V&H stock baffle on the end closest to the engine? A bit of resistance for back pressure, splits the exhaust coming into the muffler AND would help getting the darn thing out!
|
|
05-20-2017, 09:08 AM | #10 |
Top Contributor
Join Date: Aug 2011
Location: North Wilkesboro, NC
Posts: 6,289
|
If you want a loud bike, talk to Topcat. TC is the expert when it comes to loud pipes.
__________________
Christopher "Monkeyman" Gray ---------------------------- Widows Sons "Overseers" Patriot Guard Rider USArmy 1987-1990 2021 Can Am Spyder RT 2018 Can Am Spyder RT Limited - SOLD 2014 Nomad - SOLD 2012 Victory Vision - SOLD 2007 Black Nomad - SOLD VMC #9367 VBA #1860 |
|
05-20-2017, 09:48 AM | #11 | |
Sr. Contributor
Join Date: Dec 2008
Posts: 18,287
|
Quote:
I thought TC stopped working after his stroke?? If he is still bending pipes he is your man for the job!
__________________
Gerry Martineau / 802 VT / VBA #0892 /[email]glmjgm@gmail.com[email] |
|
|