|
01-02-2015, 10:27 AM | #31 |
Join Date: May 2012
Location: Southern Alberta
Posts: 663
|
Unfortunately right now the smallest centerfire I have is the .270. I've been looking at .223 but in an AR frame. I've checked and there isn't much for used bolt action around here in .223 anyway. However I have to sell a few pieces out of my quiver to warrant the spend to my wife. I am going to dig the reload stuff out though which will bring back some good memories. My Dad made lots of notes and recorded all his load info, good or bad because he knew it would be me reading through it.
__________________
VBA #02217 06 Nomad Buy the ticket, Take the ride. Login or Register to Remove Ads |
|
01-02-2015, 10:40 AM | #32 | |
Sr. Contributor
Join Date: Nov 2007
Location: Way East Valley
Posts: 12,015
|
Quote:
__________________
Ponch VBA 0019 VROC 8109-R BMWMOA 162849 BMWRA 41335 BMW: When you care enough to ride the very best. My Motorrad Blog My Motorrad YouTube 2009 BMW R1200RT Previous bikes:2007 Nomad | 2001 Vulcan 800 Classic | 1984 GPz750 | 1978 KZ1000A2 Rallies: Custer '09|Prairie Du Chien '10|Crescent City '11 |
|
|
01-06-2015, 09:34 PM | #33 |
A friend and I hit the range with a chronograph last Sunday and I learned a few things. My powder scale is doing a great job of throwing consistent loads. I also learned that different brass will shoot differently for the same load.
I bought a box of Nosler 55 gr ballistic tips and loaded up several test load groups. They were all over the place. The chronograph told us that I still have room for max loads but my best groups have been with reduced loads so far. I've ordered a Rifle Basix SAV-1 trigger and 300 cases of cleaned and prepped LC brass. I'm hoping that using consistent cases and a nice light - crisp trigger will help the accuracy even more. Oh, since I had my best group yet with 40 gr ballistic tips I've ordered a box of 45 gr spitzers to try. The chronograph also told us that factory 69gr Match ammo had the exact same muzzle velocity as one of my reduced loads. I always thought that manufacturers generally loaded close to max loads.
__________________
Idaho (aka Curmudgeon) Blue Knights Idaho III VBA #110 VROC #24864 IBA #49753 2007 Nomad 86,000 miles Bud Smalley Pocatello, Idaho Idaho Jack Adapter |
|
|
01-06-2015, 09:43 PM | #34 |
Sr. Contributor
Join Date: Nov 2007
Location: Way East Valley
Posts: 12,015
|
I think they try to average out some power to save money and it also depends on what gun or barrel the load was tested on for the published ballistics. My .30-06 has a 24" barrel, so it should do well as most ballistics are published with a 22". If you have a short barreled gun, good luck.
__________________
Ponch VBA 0019 VROC 8109-R BMWMOA 162849 BMWRA 41335 BMW: When you care enough to ride the very best. My Motorrad Blog My Motorrad YouTube 2009 BMW R1200RT Previous bikes:2007 Nomad | 2001 Vulcan 800 Classic | 1984 GPz750 | 1978 KZ1000A2 Rallies: Custer '09|Prairie Du Chien '10|Crescent City '11 |
|
01-07-2015, 05:52 AM | #35 | |
Jr. Member
Join Date: Jan 2015
Location: Mendocino County
Posts: 8
|
223 grouping
Quote:
is your Savage a single shot break open type? As you will find reloading bottlenecks is trickier than straight case. Anyway right off hand I would be looking at shoulder space just to get it right for starters. In all likelihood seating depth was to far back on tho see 40 grains. The nice thing on a breach loader or bolt action, is you can mark the slug that you have not finish crimped yet, with a sharpie and gently stuff it in chamber. You want it to where it just kisses the lands. Then try out a few rounds. Login or Register to Remove Ads |
|
|
02-01-2015, 10:39 PM | #36 |
Well, I got a three round group that is covered by a quarter at 100 yards. 55 gr Nosler Ballistic Tips over 25 grains of Varget. Still not done. I want them touching. Now I'm going to pay REAL close attention to my powder charges and get a primer pocket uniformer to make sure everything is the same on the back end.
I've tried to load my bullets closer to the lands but when I do the magazine spring pushes the rounds up too far and they don't feed worth a crap. I need to stick with recommended cartridge OAL. I plan to experiment with small changes in powder charge to see if I can dial in the accuracy that I'm looking for. You are right about the difference between loading rifle and pistol cartridges. The thousands of 44mag that I loaded were NEVER a problem. Maybe because a handgun can't realize the same level of accuracy as a long gun from a bench. Don't know. I was always very happy just dropping the hammer on heavy loads and hitting what I aimed at with the pistol. I want tack driving accuracy with the rifle.
__________________
Idaho (aka Curmudgeon) Blue Knights Idaho III VBA #110 VROC #24864 IBA #49753 2007 Nomad 86,000 miles Bud Smalley Pocatello, Idaho Idaho Jack Adapter
Last edited by Idaho; 02-01-2015 at 10:46 PM.
|
|
|
02-14-2015, 12:25 AM | #37 |
While cleaning the rifle I stood it up on the butt plate and loosened the action screws and the action and barrel settled down into the stock. At that point I knew that I was chasing my tail so I turned the gun over to a gunsmith friend who will glass bed the action. I'm expecting that to help hold the action in one spot in the stock so that I can get the accuracy that I'm looking for. He only works on Fridays and two have now passed with no word from him. I'm hoping that next week I will hear from him.
In the meantime I still have my 25-06 to chase coyotes. I expect that rifle will blow a dog apart if I hit one but at least I can get out of the house.
__________________
Idaho (aka Curmudgeon) Blue Knights Idaho III VBA #110 VROC #24864 IBA #49753 2007 Nomad 86,000 miles Bud Smalley Pocatello, Idaho Idaho Jack Adapter |
|
|
03-06-2015, 09:45 PM | #38 |
After getting the action bedded I still got unworthy results so I went to work with a dremel tool and floated the tang. Then I loaded up a group of handloads with 3 different powder charges of Varget pushing 55gr Nosler Ballistic Tips and 69gr Barnes Match Burners. Finally got respectable groups over 23 gr of Varget. Today I bought a box of Berger 70 gr VLDs and plan to load some up this weekend and see how good those are. Getting excited now.
__________________
Idaho (aka Curmudgeon) Blue Knights Idaho III VBA #110 VROC #24864 IBA #49753 2007 Nomad 86,000 miles Bud Smalley Pocatello, Idaho Idaho Jack Adapter |
|
|
03-07-2015, 09:31 AM | #39 |
Join Date: Aug 2007
Location: Newmarket Ontario Canada
Posts: 35,387
|
It sounds like your going the right direction Bud. Did the gunsmith also put pillar blocks in the stock or just bed the action? Also is the barrel free floated?
__________________
2002 Nomad aka Bountyhunter VBA #27 VROC #18951 |
|
04-18-2015, 09:17 AM | #40 |
Update and success!!
A friend at work gave me some of his handloads. Two different loads with different bullets and powder. One gave me close to what I've been looking for. I loaded up the same load, or so I thought, and went to the range and they shot crappy. A little research and I found out that he loaded 55 gr FLAT BASE ballistic tips and I loaded 55 gr BOATTAIL ballistic tips. I bought a box of flat base bullets and loaded up a bunch of test rounds. I started with his load and then went up 3 tenths of a grain and jumped two tenths after that up to the next full grain of powder. His load plus 3 tenths gave me a four shot group at 100 yards that measured 1/2 inch. YES!! I finally got the ragged hole that I've been looking for!! I feel like doing handsprings I'm so fricken happy.
__________________
Idaho (aka Curmudgeon) Blue Knights Idaho III VBA #110 VROC #24864 IBA #49753 2007 Nomad 86,000 miles Bud Smalley Pocatello, Idaho Idaho Jack Adapter |
|
|
04-18-2015, 10:14 AM | #41 |
Sr. Member
Join Date: Oct 2007
Location: Dedham Maine
Posts: 4,199
|
A lot of work but wow great results! Very nice grouping :)
__________________
|
|
04-18-2015, 05:35 PM | #42 |
Join Date: Aug 2007
Location: Newmarket Ontario Canada
Posts: 35,387
|
It sounds like you figured it out at last, I'll be doing a lot of the same on my .22 target rifle. It needs some pillar bedding, the trigger stoned and lightened, and it too should improve.
__________________
2002 Nomad aka Bountyhunter VBA #27 VROC #18951 |
|
05-09-2015, 03:44 PM | #43 |
Good luck Ring, it is always fun to try to get the most accuracy out of a firearm. Usually the guy pulling the trigger is the limiting factor.
I'm still not done with my .223. While I get a good group one time the next trip to the range gives lousy results with the same loads. After that happening a LOT I've decided that it is the barrel. I've ordered another barrel from McGowen. It will be a 26 inch varmint barrel with a 1-8 twist. That will allow me to shoot 55 to 75 grain bullets which is where I want to be. Don't remember if I've posted this here before but in the course of this project I began to seriously consider that my accuracy problem could be me. A friend at the range let me shoot two of his rifles and without really trying I was able to stack bullets into one ragged hole with each one. That let me focus back on the hardware.
__________________
Idaho (aka Curmudgeon) Blue Knights Idaho III VBA #110 VROC #24864 IBA #49753 2007 Nomad 86,000 miles Bud Smalley Pocatello, Idaho Idaho Jack Adapter |
|
|
05-09-2015, 06:30 PM | #44 |
Join Date: Aug 2007
Location: Newmarket Ontario Canada
Posts: 35,387
|
I polished the trigger and replaced the spring a few days ago, as well as polishing the bolt. It now has a 1lb pull on the trigger, and almost zero creep with a nice clean break. The bolt slides back and forth beautifully, but does hang up a tiny bit during feeding when using unplated bullets, plated bullets load perfectly.Ive been shooting it a 50 yards and can usually put 3 bullets in the same hole, one a 1/4" away and usually one flyer in the group. That was using Federal Match ammo, I'll try some CCI's and some RWS or Eley if I can find it. My goal for this rifle is for it to shoot consistent 3/8" groups, but will have to pillar block it most likely to get there. I also think I need a more solid bench rest as the one I'm using is a cheapy and wobbles a bit.
Good luck with the new barrel, hopefully it will make a difference for you, mine has a hammer forged barrel and it should be ok as is.
__________________
2002 Nomad aka Bountyhunter VBA #27 VROC #18951 |
|
05-10-2015, 12:06 AM | #45 |
Sr. Member
Join Date: Apr 2009
Location: Hot Springs, SD and other warm and dry places
Posts: 1,043
|
I just picked up a Savage BMag in .17 WSM. I haven't shot it much just yet, just enough to get the scope sighted in with no rest (hitting a 4" target at 100 yards-3" spread). Yeah I'm a shaky old fart. I then added a bi-pod and I'll get a chance to check it out next week on some dogs in Montana.
Shoots a 20 grain ballistic tip bullet @ 3000 fps at the muzzle. 3 1/2" bullet drop at 200 yards and still maintaining over 2000 fps. Supposed to be the fastest rim fire ever made. Should work nicely for varmints up to coyote size. |
|