|
04-03-2015, 07:56 PM | #1 |
Member
Join Date: Apr 2015
Location: Preble county Ohio
Posts: 259
|
Gas tank trim removal
What is the trick to removing the key switch trim to get the gas tank center trim off? There is a fuel octane sticker that is on my tank and it's crooked and partially under that trim and I want to remove that ugly sticker.
__________________
My new ride.... 2015 Honda F6B Deluxe Login or Register to Remove Ads |
|
04-03-2015, 08:05 PM | #2 |
Join Date: Jun 2013
Location: South Shore, MA
Posts: 4,629
|
It pops out on the 1700 Nomad. Not sure if the Vaq is the same.
__________________
VBA # 02424 VROC # 35971 2010 Nomad 1700 Metallic Diablo Black/Metallic Titanium |
|
04-03-2015, 08:09 PM | #3 |
Join Date: Jun 2013
Location: South Shore, MA
Posts: 4,629
|
It's the same part number for both bikes so it pops out. Get something under the edges that won't scratch and pop it up.
__________________
VBA # 02424 VROC # 35971 2010 Nomad 1700 Metallic Diablo Black/Metallic Titanium |
|
04-04-2015, 02:46 AM | #4 |
Member
Join Date: Mar 2015
Location: Ontario Canada
Posts: 146
|
Yup exactly
__________________
2014 Vaquero SE Cirius engine guard lights Vizi-Tec Supa-brake II Afterburner 4500LM LED headlamp Ivan's Performance 12 VDC plug-in BAK Thunder mfg. Cobra Tri-Flo 2011 Ducati Monster 796 2006 GSXR 600 (track bike) |
|
04-04-2015, 07:57 AM | #5 |
Top Contributor
Join Date: Feb 2008
Location: Ontario
Posts: 6,942
|
That chrome ring can also vibrate and cause a rattle. I cured it by putting a small diameter elastic band around the ring. The elastic band also makes the ring stand off the tank trim just a little making it easier to get a plastic putty knife under the ring to get it out.
Login or Register to Remove Ads |
|
04-04-2015, 08:59 AM | #6 |
Member
Join Date: Apr 2015
Location: Preble county Ohio
Posts: 259
|
I'll try a little harder but mine will "pop" up and then seems to catch on something and hang. I'm afraid to pull any harder. Factory service manual will be here today i'll see if I'm missing something.
__________________
My new ride.... 2015 Honda F6B Deluxe |
|
04-04-2015, 10:36 AM | #7 |
Top Contributor
Join Date: Feb 2008
Location: Ontario
Posts: 6,942
|
Just pull it harder, it will come out without breaking anything.
Make sure you pull it straight, not on an angle and it should come out. The service manual wont tell you how to do it any different. All the manual says is "Remove Switch Cover (A) with a photo of the ring, that's it. There is no explanation of how to do it.
Last edited by redjay; 04-04-2015 at 10:42 AM.
|
|
04-04-2015, 06:33 PM | #8 |
Member
Join Date: Jan 2009
Posts: 496
|
That thing is a real pain but it will come off if you pull up straight. I was worried about breaking something but I had to really apply some force to get it off. Here's a couple of pics of what the thing looks like
|
|
04-05-2015, 08:18 AM | #9 |
Top Contributor
Join Date: Feb 2008
Location: Ontario
Posts: 6,942
|
CBO Vaquero.
Did you get the trim ring out ? |
|
04-05-2015, 08:37 AM | #10 |
Member
Join Date: Apr 2015
Location: Preble county Ohio
Posts: 259
|
I haven't tried anymore yet. Weather is decent so I'm out riding it. The new 2014 service manual does say there is a "catch" that has to be released at the front and they show a tool releasing it?? Looking at the pictures above I don't see any catch? I bet it's just a snap catch.
__________________
My new ride.... 2015 Honda F6B Deluxe |
|
04-05-2015, 07:00 PM | #11 |
Member
Join Date: Mar 2014
Location: Midwest
Posts: 273
|
use painters tape
I put two wide pieces of painters tape over the bezel. Tape it to the tank bib. That way I have something more substantial to pull on. No prying under the lip or new scratches either. You are now pulling both parts and the "bib" levers it upward.
|
|