HD switches

99Nomad 1 · 01-18-2017, 10:02 AM

I just put a set of apes on my 99 Nomad. When I ordered them I also ordered new switches and master cylinders. Other are for a Harley has anyone done this conversion? I have the right side all wired up and everything seems to be working properly. The left side is a different story.

twowheeladdict · 01-18-2017, 10:07 AM

Not sure I understand your question. Did you convert to HD switches and master cylinder? I am confused by the sentence starting with 'Other'.

99Nomad 1 · 01-18-2017, 10:14 AM

Yes converting to HD switches and master cylinders have problems getting the turn signals to work.

twowheeladdict · 01-18-2017, 10:20 AM

Since you said the right side is working properly, do you have right turn signal?

What year switches and for what model bike did you buy?

Did the switches come with a connection diagram so you know which wire to hook where?

99Nomad 1 · 01-18-2017, 10:27 AM

No the right signals are not flashing. The did come with a diagram you would think it would be a straight forward job. But something just doesn't add up. When you turn the signals on they come on they just don't flash.

twowheeladdict · 01-19-2017, 08:17 AM

You are going from a switch on just the left control that does both turn signals to a switch on each side. There is a turn signal control box somewhere in that circuit. Are you still going to it?

How did you go the wiring diagram for the original turn signal circuit to a Harley turn signal circuit. That is where your problem lies.

Do you have the electrical diagram for your nomad?

01-18-2017, 10:02 AM	#1
99Nomad 1 Jr. Member Join Date: Jan 2015 Posts: 14	HD switches I just put a set of apes on my 99 Nomad. When I ordered them I also ordered new switches and master cylinders. Other are for a Harley has anyone done this conversion? I have the right side all wired up and everything seems to be working properly. The left side is a different story. Login or Register to Remove Ads
	0

01-18-2017, 10:07 AM	#2
twowheeladdict Advanced Member Join Date: Nov 2011 Location: Middle Tennessee Posts: 616	Not sure I understand your question. Did you convert to HD switches and master cylinder? I am confused by the sentence starting with 'Other'. __________________ 2010 Vulcan Voyager, 2007 Vulcan Mean Streak, 2009 Vulcan Nomad
	0

01-18-2017, 10:20 AM	#4
twowheeladdict Advanced Member Join Date: Nov 2011 Location: Middle Tennessee Posts: 616	Since you said the right side is working properly, do you have right turn signal? What year switches and for what model bike did you buy? Did the switches come with a connection diagram so you know which wire to hook where? __________________ 2010 Vulcan Voyager, 2007 Vulcan Mean Streak, 2009 Vulcan Nomad
	0

01-18-2017, 10:27 AM	#5
99Nomad 1 Jr. Member Join Date: Jan 2015 Posts: 14	No the right signals are not flashing. The did come with a diagram you would think it would be a straight forward job. But something just doesn't add up. When you turn the signals on they come on they just don't flash. Login or Register to Remove Ads
	0

01-19-2017, 08:17 AM	#6
twowheeladdict Advanced Member Join Date: Nov 2011 Location: Middle Tennessee Posts: 616	You are going from a switch on just the left control that does both turn signals to a switch on each side. There is a turn signal control box somewhere in that circuit. Are you still going to it? How did you go the wiring diagram for the original turn signal circuit to a Harley turn signal circuit. That is where your problem lies. Do you have the electrical diagram for your nomad? __________________ 2010 Vulcan Voyager, 2007 Vulcan Mean Streak, 2009 Vulcan Nomad
	0

01-18-2017, 10:14 AM	#3
99Nomad 1 Jr. Member Join Date: Jan 2015 Posts: 14	Yes converting to HD switches and master cylinders have problems getting the turn signals to work.
	0