|
07-14-2009, 05:35 PM | #1 |
Top Contributor
Join Date: Oct 2007
Location: Colorado
Posts: 6,530
|
Anybody ever hear or use these connectors?
Been looking for some connectors to do some wiring without major splicing. I have seen these and think they might be the trick but sometimes easy is not the best. Anyone heard of these or have thoughts?
http://www.posi-lock.com/posiplug.html
__________________
Joel "Waterman" 2017 HD Road Glide Ultra 2006 Nomad - Sold VBA 213 VROC 16913 Custer 09: Cortez 10: Crescent City 11: Kanab 12: Estes Park 13: Tahoe 14: Red Lodge 16 Login or Register to Remove Ads |
|
07-14-2009, 05:40 PM | #2 |
Advanced Member
Join Date: Aug 2007
Location: Anthem, AZ
Posts: 642
|
Anybody ever hear or use these connectors?
Never have seen them before, but they look pretty kewl.
__________________
ccmjr77 2007 Kawasaki Nomad 1600 |
|
07-14-2009, 06:13 PM | #3 |
Join Date: Apr 2008
Posts: 1,472
|
Anybody ever hear or use these connectors?
Never seen them before either. I am like you though, I would like an endorsement before I waste my time and money.
|
|
07-14-2009, 06:18 PM | #4 |
Sr. Contributor
Join Date: Apr 2008
Location: Tamworth New Hampster 06 1600
Posts: 12,484
|
Anybody ever hear or use these connectors?
Sorry waterman first i have seen them. Might be worth a try, and a report..
See how tight they are against air and water, which allow corrosion, and or try them with dielectric grease, and or liquid tape. I wish I could help you.
__________________
06 1600 Nomad Just call me Mac molon labe come and get it |
|
07-14-2009, 08:25 PM | #5 |
Top Contributor
Join Date: Oct 2007
Location: Colorado
Posts: 6,530
|
Anybody ever hear or use these connectors?
Thanks guys. Might give them a try on a couple of projects. One at work and one on the bike. One of them I really don't want to splice and solder the wire and this might be a simplier alternative. May try some dielectric grease and also may try some finger nail polish on the plastic treads (works almost as good as locktite but not as strong). I guess someone has to be the guinea pig.
__________________
Joel "Waterman" 2017 HD Road Glide Ultra 2006 Nomad - Sold VBA 213 VROC 16913 Custer 09: Cortez 10: Crescent City 11: Kanab 12: Estes Park 13: Tahoe 14: Red Lodge 16 Login or Register to Remove Ads |
|
07-14-2009, 08:52 PM | #6 |
Member
Join Date: Jan 2008
Location: waynesboro, va
Posts: 408
|
Anybody ever hear or use these connectors?
I've used them and they seem to work pretty well. I picked them up at Walmart. My dad showed them to me for the first time.
|
|
07-14-2009, 08:58 PM | #7 |
Member
Join Date: Oct 2008
Location: Maysville, Ky.
Posts: 283
|
Anybody ever hear or use these connectors?
I have used them when I hooked up the hyper-lites My wife gave me for x-mass. Seemed to work fine for me. Did not seal them due to they are under rear fender inside black cover. Maybe I should seal them.... But for ease of use they are good.
|
|
07-15-2009, 08:28 AM | #8 |
Join Date: Aug 2007
Location: Newmarket Ontario Canada
Posts: 35,387
|
Anybody ever hear or use these connectors?
Ive never seen those yet, I would try them in an area such as the headlight bucket or another easy access area. If your working in a tight difficult spot I would still solder and heat shrink the wires. that way you know it won't come apart.
__________________
2002 Nomad aka Bountyhunter VBA #27 VROC #18951 |
|
07-15-2009, 02:01 PM | #9 |
Top Contributor
Join Date: Jul 2007
Posts: 5,263
|
Anybody ever hear or use these connectors?
I have seen those in the past waterman. they are highly rec'd in auto use. i know cycles are different as far as vibration, but I bet they work great.
|
|
07-23-2009, 12:28 PM | #10 |
Member
Join Date: Apr 2009
Location: Hingham, MA
Posts: 450
|
Anybody ever hear or use these connectors?
My question would be, does the wire that you are tapping off of need to inserted through a hole, which would require that it be disconnected on at least one end, or does the connector some how slip over the wire. Other than that I would say they look like they would be much better than crimp on splices. The ability to reuse the same connection would make the great for accessory changes.
__________________
2002 Nomad 1500 - Black and Red 2011 Nomad 1700 - Black and Silver MAPGR Ride Captain Enjoy the ride.... |
|
07-23-2009, 01:15 PM | #11 |
Member
Join Date: Apr 2008
Location: Independence, MO
Posts: 259
|
Anybody ever hear or use these connectors?
I used them just last week to finish the wiring for my fairing. I really liked them. Very simple to use. I used only one, to take power from the headlight wire at the junction box under the right side cover, to power the relay that then goes out to power the stereo in the fairing.
I first saw them on the wiring harness that Eastern Beaver sells for use with the PC8 Fuse box. From there, I tried to get them at auto parts stores around town, but no luck. NAPA is listed as carrying them, but when I arrived with the catalog printout and everything, I got nothing. So I ordered them from Signal Dynamics and had to pay $8.50 shipping for $3.50 worth of taps. The red ones (PTA2022) fit the 22 gauge wires coming out of the fuse box. Since I was ordering anyway, I also got a couple of other sizes. There's not a hole in the cap where the hot wire goes, but a slot that it fits into. Check out the live demo link on that page, it explains it well. |
|
07-23-2009, 08:53 PM | #12 |
Jr. Member
Join Date: Jun 2009
Location: Long Island, New York
Posts: 18
|
Anybody ever hear or use these connectors?
Hi guys! Was cruising the site, and read this post, then decided on a spur of the moment to order a bunch of them for the upcoming wiring harnesses I'l be fabricating as I mount/illuminate the trunk, add interior LED lights to saddlebags, and lightbar plus fog lights. Kinda saved up all of the electrical add-ons to do all at once. Will report back with results of the installation as soon as finished.
|
|
07-23-2009, 09:50 PM | #13 |
Advanced Member
Join Date: Nov 2008
Location: Dodgeville, WI COLD!!!
Posts: 550
|
Anybody ever hear or use these connectors?
I know Jim from Eastern Beaver sells them on his website, and from my experience, he wouldn't put anything on his website that was too junky.
|
|
07-23-2009, 10:54 PM | #14 |
Sr. Contributor
|
Anybody ever hear or use these connectors?
They look like they should work. You could still use a little bit of electrical tape. I am a believer in electrical tape.
__________________
Gene Cross, Jr. Boaz, Alabama KawaNOW/VBA #1181 |
|
07-28-2009, 12:03 AM | #15 |
Member
Join Date: Mar 2009
Location: Edmonton, Alberta Canada
Posts: 203
|
Anybody ever hear or use these connectors?
I have delt with Jim at eastern beaver for 3 years now. He offers excellent advise-----and has high quality products----has great connectons-----( no pun intended)
I use the posi-lock and it works great. http://easternbeaver.com/index.html He has great service as well----orders are filled and shipped quickly----and best of all-----paypal. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Connectors under seat | dhomoney | 1500 & 1600 Nomad | 21 | 10-01-2017 08:12 AM |
Did you hear that? | rickyboy | Canada West Group | 17 | 06-28-2011 07:46 AM |
The top 31 things that you will never hear a south | recumbentbob | Lighter Side/Jokes | 8 | 05-16-2011 12:29 PM |
Did I hear right | gramps1 | SouthEast Group | 2 | 12-30-2009 10:53 AM |
30 things you'll never hear a woman say: | Scoot | Lighter Side/Jokes | 7 | 03-19-2008 11:27 AM |