|
02-16-2009, 08:19 PM | #1 |
Advanced Member
Join Date: Jul 2007
Location: Huntsville, TX
Posts: 571
|
Rear brake rotor question.
I bought new brake pads for the rear brake because it looks like they were starting to get thin. When I rubbed my finger over the rotor, it is dished out in two places on both sides of the disc. It's like there are two circles of wear opposite each other. I did not put the new pads on thinking I may have to replace the rotor. The brake still works great; good lever pressure, no squealing, and the brake pads still have some thickness, but the disc is not smooth like on the front rotors. What do y'all think? Is this normal? What would cause the disc to wear like this? Should I leave it or replace it???
Login or Register to Remove Ads |
|
02-16-2009, 08:25 PM | #2 |
Sr. Member
Join Date: Dec 2007
Location: Boulder County, Colorado
Posts: 2,014
|
Rear brake rotor question.
I'd take the pads to near the minimum then replace both the pads and rotor, unless the rotor can be turned, but not sure if it can be.
|
|
02-17-2009, 06:09 AM | #3 | |
Sr. Member
Join Date: Nov 2007
Location: Blairsville in N. GA mountains
Posts: 1,625
|
Rear brake rotor question.
Quote:
__________________
Dick Campbell Blairsville, GA 2008 Red & Black Nomad 1600 (retired) 2009 1900 Yamaha Stratoliner (retired) 2013 1900 Yamaha Stratoliner 2018 CanAm RT Limited Spyder (Sold) 2014 Goldwing Roadsmith Red Trike (Sold) 2019 Goldwing DCT Roadsmith Copper & Black Trike VBA #243 Darkside #115 Patriot Guard Rider American Legion Rider |
|
|
02-17-2009, 10:29 PM | #4 |
Top Contributor
Join Date: Jul 2007
Posts: 5,263
|
Rear brake rotor question.
+1 with Ells,
|
|
02-17-2009, 10:52 PM | #5 |
Join Date: Apr 2008
Location: (SE Louisiana)
Posts: 8,340
|
Rear brake rotor question.
Pablo, Is this the first time the rear pads are replaced? They quit using asbestos in brake pads years ago and started impregnating the newer pads with metal to make them last longer. Nothing is as good as asbestos on brake pads, piping insulation, or linoleum floors. I've been to many asbestos seminars because we have so much of it in our plant used as hot piping insulation and building siding and roofing. As long as the fibers are not friable (blown or made to fly) it is the most durable and best material in the world. So many older mechanics having been diagnosed with asbestosis forced the government to pass new regulations phasing it out. Rotors take a real beating with those metal impregnated pads.
__________________
2016 Electra Glide Ultra Limited CVO Palladium Silver / Phantom Blue 110 cu in SE 2012 Electra Glide Ultra Limited (Traded 6/22/16) Tequila Sunrise / HD Orange Vance & Hines true dual headers Rinehart 4" slip ons Screamin Eagle Super Tuner Screamin Eagle Stage 1 intake Dyno tuned H.O.G.# 4514015 2007 Nomad 1600 (Traded 6/23/12) VBA #482 Login or Register to Remove Ads |
|
02-18-2009, 07:42 AM | #6 |
Advanced Member
Join Date: Jul 2007
Location: Huntsville, TX
Posts: 571
|
Rear brake rotor question.
Yes, this is the first time to replace pads. I already have the brake pads; they are supposed to be OEM for the rear brake. If the pads are causing the rotor wear, then the new one's will probably eat up the new rotor and I'll end up in the same situation (although I haven't heard of others with this problem). If I just replace the pads, wouldn't they conform to the shape of the disc?
|
|
02-18-2009, 08:46 AM | #7 |
Join Date: Apr 2008
Location: (SE Louisiana)
Posts: 8,340
|
Rear brake rotor question.
I read your first post again and if the worn spots are uniform and directly across from eachother it doesn't sound like what I mentioned earlier. I'm going to check my rear rotor to see if it's doing the same. You might want to mic the thickness of the rotor at the worn spots and check to see if it is still above the service limit of 0.24". I doubt the pads have worn down to the rivets. It seems like if they have you would have felt it when applying the rear brake. The service limit on the pads is 0.04". All specs come from the service manual.
__________________
2016 Electra Glide Ultra Limited CVO Palladium Silver / Phantom Blue 110 cu in SE 2012 Electra Glide Ultra Limited (Traded 6/22/16) Tequila Sunrise / HD Orange Vance & Hines true dual headers Rinehart 4" slip ons Screamin Eagle Super Tuner Screamin Eagle Stage 1 intake Dyno tuned H.O.G.# 4514015 2007 Nomad 1600 (Traded 6/23/12) VBA #482 |
|
02-18-2009, 09:17 AM | #8 |
Advanced Member
Join Date: Jul 2007
Location: Calgary, Alberta, Canada
Posts: 959
|
Rear brake rotor question.
Not sure why but both my 99 Drifter 800 and my 06 Nomad eat rear brake pads!
Used to get 2 - 3 times the Km on my Ventures pulling trailer and 2 up! Since both of these bikes do not have linked brakes I use the fronts mostly! On the Ventures they were linked so you tended to use both front and rear together! Just an observation! |
|
02-18-2009, 04:54 PM | #9 |
Sr. Contributor
Join Date: Apr 2008
Location: Tamworth New Hampster 06 1600
Posts: 12,484
|
Rear brake rotor question.
I don't understand... Is this a spot say 3 inches by 3 inches where there is a depression? if so I find that very odd.
If it is a depression showing general wear all the way around the rotor, but more central to the entire circle that could be normal. New pads on a old rotor in time will wear in to the shape of the rotor, but you won't have max braking till that happens. One cause might be if you live in a place that has flint chips in the road, which is turned to dusts... or maybe a place where silica is, in quartz and other hard stone that becomes dust.
__________________
06 1600 Nomad Just call me Mac molon labe come and get it |
|
02-18-2009, 05:06 PM | #10 |
Sr. Contributor
|
Rear brake rotor question.
you guys know that rotors are not supposed to be perfectly smooth and flat right? there has to be some uneven spots to push the pads away when you release the brake. Built in wobble zones if you will....
__________________
I love my Victory Cross Country Tour 106. Smells like Victory! Ultra's are Limited There are two types of Harley riders. Those that trailer them and those that push them. The most Interesting Man in the World "Find the things in life you don't do well and don't do those things" Member # 0005 |
|
02-18-2009, 05:30 PM | #11 |
Advanced Member
Join Date: Jul 2007
Location: Huntsville, TX
Posts: 571
|
Rear brake rotor question.
They are all the way around the rotor on both sides. It is a slight depression; one nearer the outer edge and one a little further toward the center of the disc. If you take your finger and thumb and touch both sides of the rotor toward the center and move your fingers toward the outer edge, you can feel two slightly dished out areas on each side.
|
|
02-22-2009, 02:52 PM | #12 |
Top Contributor
Join Date: Jul 2007
Posts: 5,263
|
Rear brake rotor question.
from what you describe Pablo, it sounds like the outer edge and inner edge of the disc pads are digging in too deep if you will. not sure why yours is doing this and others are not. Do you use mainly your rear brake for most of your stopping power? I've seen cars/trucks just have groves starting to dig into the rotors from various reasons. Im sure it could happen to bikes too.
|
|
02-22-2009, 06:48 PM | #13 | |
Advanced Member
Join Date: Dec 2008
Location: Central Ohio, USA
Posts: 676
|
Rear brake rotor question.
Quote:
I do agree the rotors are too thin to be machined on most motorcycles, a non-serviceable part. Pablo: Replace the pads so long as the brakes are not pulsing during a stop and do not exceed the service limits mentioned above, you'll be fine. |
|
|
02-22-2009, 07:51 PM | #14 |
Advanced Member
Join Date: Jul 2007
Location: Huntsville, TX
Posts: 571
|
Rear brake rotor question.
After looking at all the comments and suggestions, I think I'll replace the pads and see how it feels. I do not use the rear brakes excessively. Mostly I use both front and rear and have never locked up the rear wheel since getting the car tire. I think I locked it up a couple of times on the motorcycle tires. Anyway, thanks for all the feedback.
Pablo |
|
02-23-2009, 04:26 PM | #15 | |
Mega-Contributor
Join Date: Sep 2007
Location: Where it doesn't snow...ever!
Posts: 21,926
|
Rear brake rotor question.
[quote=Jack C.] Quote:
I do agree the rotors are too thin to be machined on most motorcycles, a non-serviceable part. Pablo: Replace the pads so long as the brakes are not pulsing during a stop and do not exceed the service limits mentioned above, you'll be fine.[/quote:kzfzyb9q] I used to do automotive brakes for a living. You are correct, Jack. Rotors are trued on a lathe, there should be virtually no runout.
__________________
Scott "Cactusjack" Hanks VBA #00105 H.O.G. #4250060 2011 H-D Ultra Limited 103ci :: 2011 HD Electra Glide Ultra Limited w/Stage 1 :: Rallies: Mesquite '08|Custer '09|Cortez '10|Crescent City '11|Kanab '12|Antlers '12|Estes Park '13|Antlers '13|Orofino '14|The Dalles '17 |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Use of Rear Brake. | usranger74 | Motorcycle Safety/Riding Techniques | 16 | 07-31-2011 04:51 PM |
Rear Brake Line Question | deacon1984 | 1500 & 1600 Nomad | 10 | 05-17-2011 04:54 PM |
Front Brake Rotor compatibility. | fubarjohnnyr | 1500 & 1600 Nomad | 14 | 10-13-2010 03:31 AM |
Brake rotor | moloprintz | Vulcan Nomad/Vaquero/Voyager | 3 | 08-31-2010 05:16 PM |
Rear Brake Question | desertdog | 1500 & 1600 Nomad | 14 | 06-21-2010 07:55 PM |