Handlebar size?

radco · 06-06-2010, 06:51 PM

The stock Nomad Bars on the 1500 meassure
Height 6" width 33" pullback 14" center 9"clamp 2x5

Vulcan 1700 Nomad 2009 - 2010 1"

H 8" W 35" PB 15" center 6-1/2" clamp 2" x 5
What does the center info mean? would that for stock risers?
Not sure these are the ones Vulcan E used.
I want a tad more pullback and stock cables.....

Do you think these would work with stock cables??

http://cgi.ebay.com/ebaymotors/VULCA...item2555667371

Chart below THANKs Rich

http://www.sideroadcycles.com/Import...ckBarsOne.html

skimo · 06-06-2010, 09:54 PM

I believe the clamp area is two inch between the kurling and 5 inch is to the outside of the kurling. It going to be close on the cables and maybe a no go. On the flanders wide max pullback bar I installed a while back, I had to cut the front brake line hose retainer which hide behind the fork cover to get some slack. Electrics, clutch line, and throttle cables were ok.

radco · 06-07-2010, 03:40 PM

Tim, Thanks,for the info, Its between them and the 1700 Bars Vulcane E used,,,,
Rich

oldbikers · 06-07-2010, 03:51 PM

Rich if the 13" work on my 1600 the 10" should work on your 1500. But that 10" with 7" pull back is not going to bring it very far back unless you lean the bars back and then I didn't get a lot of pull back.

radco · 06-07-2010, 05:13 PM

Jim Thanks, Im leaning more towards the 1700 bars now,,,,

06-06-2010, 06:51 PM	#1
radco Sr. Member Join Date: Oct 2007 Location: Dedham Maine Posts: 4,199	Handlebar size? The stock Nomad Bars on the 1500 meassure Height 6" width 33" pullback 14" center 9"clamp 2x5 Vulcan 1700 Nomad 2009 - 2010 1" H 8" W 35" PB 15" center 6-1/2" clamp 2" x 5 What does the center info mean? would that for stock risers? Not sure these are the ones Vulcan E used. I want a tad more pullback and stock cables..... Do you think these would work with stock cables?? http://cgi.ebay.com/ebaymotors/VULCA...item2555667371 Chart below THANKs Rich http://www.sideroadcycles.com/Import...ckBarsOne.html __________________ Login or Register to Remove Ads
	0

06-06-2010, 09:54 PM	#2
skimo Member Join Date: Apr 2008 Location: Panama City, Florida Posts: 269	Handlebar size? I believe the clamp area is two inch between the kurling and 5 inch is to the outside of the kurling. It going to be close on the cables and maybe a no go. On the flanders wide max pullback bar I installed a while back, I had to cut the front brake line hose retainer which hide behind the fork cover to get some slack. Electrics, clutch line, and throttle cables were ok.
	0

06-07-2010, 03:40 PM	#3
radco Sr. Member Join Date: Oct 2007 Location: Dedham Maine Posts: 4,199	Handlebar size? Tim, Thanks,for the info, Its between them and the 1700 Bars Vulcane E used,,,, Rich __________________
	0

06-07-2010, 03:51 PM	#4
oldbikers Sr. Member Join Date: Apr 2008 Location: Sardis Mississippi Posts: 3,513	Handlebar size? Rich if the 13" work on my 1600 the 10" should work on your 1500. But that 10" with 7" pull back is not going to bring it very far back unless you lean the bars back and then I didn't get a lot of pull back. __________________ Jim Hardin Sardis MS Kawanow # 453 Proud PGR member
	0

06-07-2010, 05:13 PM	#5
radco Sr. Member Join Date: Oct 2007 Location: Dedham Maine Posts: 4,199	Handlebar size? Jim Thanks, Im leaning more towards the 1700 bars now,,,, __________________ Login or Register to Remove Ads
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Handlebar size..	wantakaw59	1500 & 1600 Nomad	4	10-15-2009 03:11 AM
2009 nomad handlebar size	jevans43	Vulcan Nomad/Vaquero/Voyager	4	09-05-2009 10:53 AM
Stock Handlebar size?	donguer	Vulcan Nomad/Vaquero/Voyager	7	05-03-2009 07:19 PM
Vista Cruise - Handlebar Size Question	burly	Vulcan Nomad/Vaquero/Voyager	10	03-19-2009 04:28 PM
Handlebar size and distance between clamps	redjay	1500 & 1600 Nomad	6	02-09-2009 06:04 PM