|
![]() |
#31 |
Top Contributor
Join Date: Nov 2007
Location: Fayetteville, Georgia
Posts: 5,792
|
My CLUTCH slips, appreciate comments
I can see why Bill felt that way.
Not all of us are rolling in money and can afford the "good stuff?!" Just 'cause it's expensive doesn't necessarily mean it's the best. As for me, I buy the cheapest I can find because that's all I can afford. Regarding the comment about Walmart, if you don't like Walmart you certainly don't have to shop there. However, you will have a hard time convincing me that there is any difference between a brand name oil (or whatever) sold by Walmart and the same item sold anywhere else.
__________________
Bob KawaNOW/VBA 210 Green/Silver 2006 Patriot Guard Riders 2009 Login or Register to Remove Ads |
![]() |
![]() |
#32 |
Advanced Member
Join Date: Oct 2007
Location: Utah; 2004 Nomad 1500
Posts: 510
|
My CLUTCH slips, appreciate comments
As I wrote in an earlier thread concerning clutch slippage, I felt my clutch slipping after installing a temporary 1/2 Caddman mod. The 1/2 part being leaving the left side on and installing the new air cleaner on the right side. It made the engine come alive and had better response and that's when I could feel the clutch slipping. I ordered the Barnett spring from Ape Racing and I'm still waiting on it's arrival. I saved about $13 bucks but it is not a stocked part for them. Probably could have found it elsewhere in stock but saving $13 seemed important at the time. Anyway, I installed a Barons Big Air kit and am eagerly awaiting the Barnett spring to complete the whole project. If I ever get my part I will report back on how it works and on the condition of my plates.
I usually ride two up, commute daily to work 5x a week, take trips pulling the trailer, etc....33K miles. I use Mobil1 V-Twin full synthetic. |
![]() |
![]() |
#33 | ||
Advanced Member
Join Date: Oct 2007
Location: Utah; 2004 Nomad 1500
Posts: 510
|
My CLUTCH slips, appreciate comments
Quote:
Quote:
|
||
![]() |
![]() |
#34 |
![]() Join Date: Sep 2007
Location: Stony Plain, Alberta
Posts: 694
|
My CLUTCH slips, appreciate comments
No personal attack meant, so if any was felt then I apologize. My point was that I see a lot of members buying crap at Walmart to save a few bucks. Did you know that last week China authorities were compelled to raid factories under contract with Walmart for Human Rights violations. ( now you know it had to be pretty bad for China to have to react to Human Rights complaints ) It seems the factory owners were withholding pay as well as food to the workers because quotas to Walmart orders were not being met.
So, point being, so what if you get cheap brand name oil and save a few bucks, look what your supporting!!! Bet you would think different if it was your son or daughter working in one of those factories. Okay, I'm done stepping off the soap box now..........
__________________
Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many of our people need it sorely on these accounts.........Mark Twain. |
![]() |
![]() |
#35 |
Top Contributor
Join Date: Nov 2007
Location: Fayetteville, Georgia
Posts: 5,792
|
My CLUTCH slips, appreciate comments
I agree with your point about China whole-heartedly.
Unfortunately, it's getting nearly impossible to buy goods that weren't made in China. It doesn't matter which store or chain you go to. We, the American people, have been sold out to China by our political leaders.
__________________
Bob KawaNOW/VBA 210 Green/Silver 2006 Patriot Guard Riders 2009 Login or Register to Remove Ads |
![]() |
![]() |
#36 |
![]() Join Date: Apr 2008
Location: (SE Louisiana)
Posts: 8,340
|
My CLUTCH slips, appreciate comments
+1 Bob. I purchase my Mobil 1 V-Twin motorcycle oil at Wal Mart and save $1.50 a quart or more over Auto Zone and even more over Advanced Auto Parts. I also by the Super Tech oil filter there for my oil changes for a little over $2.25 per filter. I've purchased riding gloves at the local HD dealership and found that they were made in China. Sports jerseys at premium prices at the retailers in the mall are all made in India, Bangladesh, etc. It's difficult to find anything with any popularity or demand made in the USA anymore. Over here, peeled crawfish tails shipped from China sell for $2.99 per pound. If you look for Louisiana peeled crawfish tails you will pay more than $12.00 per pound. They taste better, but for the average Joe or someone on a fixed income, I don't blame them at all for buying the Chinese produce. If you look for "Made in USA" on the tags before you buy it, chances are you will be doing alot of traveling and more than likely spending triple or more for your goods. It's sad but that's just the way it is.
__________________
2016 Electra Glide Ultra Limited CVO Palladium Silver / Phantom Blue 110 cu in SE 2012 Electra Glide Ultra Limited (Traded 6/22/16) Tequila Sunrise / HD Orange Vance & Hines true dual headers Rinehart 4" slip ons Screamin Eagle Super Tuner Screamin Eagle Stage 1 intake Dyno tuned H.O.G.# 4514015 2007 Nomad 1600 (Traded 6/23/12) VBA #482 |
![]() |
![]() |
#37 |
Sr. Contributor
Join Date: Apr 2008
Location: Tamworth New Hampster 06 1600
Posts: 12,484
|
My CLUTCH slips, appreciate comments
Can you even get real maple syrup made in china, or maine lobster?
![]()
__________________
06 1600 Nomad Just call me Mac molon labe come and get it |
![]() |
![]() |
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ray Stevens comments on our border. | gghost | Off-Topic | 5 | 05-26-2010 02:38 PM |
Any comments on "CLUTCH" issue? | bokobob | Vulcan Nomad/Vaquero/Voyager | 15 | 05-10-2010 11:00 PM |
Comments Made in the Year 1955 | AlabamaNomadRider | Off-Topic | 0 | 03-18-2010 12:26 AM |
colonoscopy comments | aussienomad | Lighter Side/Jokes | 4 | 07-28-2008 10:34 AM |
Newbie comments on Nomad | flavor | Vulcan Nomad/Vaquero/Voyager | 25 | 05-21-2008 11:02 AM |