Bag Liners

[VulcanE]

For those of us with fairings, one of the best and most convenient storage solutions for smaller things I've found is a "windshield storage pouch". The one I have is this one.............


Click Here

[vincent]

These are the bags I have.
www.bagsforbikes.com/

[ringadingh]

Originally Posted by VulcanE

For those of us with fairings, one of the best and most convenient storage solutions for smaller things I've found is a "windshield storage pouch". The one I have is this one.............
Click Here

Those are real convenient to have. I also have compartments in my lower fairings that come in quite handy, especially on the longer trips.

[taranis]

Originally Posted by VulcanE

For those of us with fairings, one of the best and most convenient storage solutions for smaller things I've found is a "windshield storage pouch". The one I have is this one.............


Click Here

I'd like to find that which would fit the OEM windshield. ???

[ringadingh]

Taranis; there is a Fire & Steel pouch that is made for the Nomad windsheild, or at least there was. Im not sure if it is still available but heres the p/n. K53000-156C is with studs, and K53000-157C is plain. Leather pouch size is 12"x 7"x 3"

[ve3hzz]

Taranis, let me find the old one off my Nomad when I had a windshield on it. I can't remember the make? I'll snap a shot of it if can't find one on the bike. It mounted using 2 of the windshield bolts and it was fairly large for reference. Give me a few hours to dig out my driveway first :'(

Scott

[MAS Tequila]

http://s307.photobucket.com/albums/n...dshield%20bag/

This is the set up on my 03.

MT



I'd like to find that which would fit the OEM windshield. ???[/quote]

[ve3hzz]

I'd like to find that which would fit the OEM windshield. ???

This is a photo of mine on the bike, disregard the white cardboard, it was a mock up of my bracket for the GPS I made prior to changing to the fairing. This shows the bag strip that runs at the back and bolts to the 2 windshield bolts I have to find it to take a picture I put it away in my garage and need to dig it out tomorrow ??? I will take a pic of it then and the manufacturer.

It's a fairly large one and holds quite a bit.

[nomadtom69]

http://www.aftermarketcyclepartsnati...zztidaa1527zz~ Found this I think it will make any windshield bag fit a Nomad

[elvis]

I have these bags: http://www.tlcproducts.com/servlet/Categories?category=Kawasaki%3AVulcan+Nomad and I think those bags should be included as standard item when we buy the bike.

Mine are also labeled as one for me and one for my wife. in addition, I strap a duffel bag to the sissy bar. My wife carries the sleeping bags in her saddle bags. She also attaches a similar bag to her rear fender rack. That's how we travel.

Man, I feel like taking a ride to CA. It was sunny and relatively warm in Palm Springs during the holidays....

[rksaw]

I use my bags 100% of the time. Like others have mentioned, mine have internal pockets for smaller items. In those pockets I keep a flashlight, mini wrench & socket, oil rag, etc. Once you use them, you'll wonder why you didn't get them sooner.

[ve3hzz]

Originally Posted by Taranis

I'd like to find that which would fit the OEM windshield. ???

Well as I said I knew I had a picture of it ON the bike, just had to find it. Now in the picture it is on the bike I have it here in the house and measured it up. Mine is 12" long by 6" high and 4" deep. The plastic band that threads through the opening on either end attach to the 2 windshield bolts on either ends 2nd in from the edge of the windshield as you should be able to see in the picture. Now if you are going to put in a power plug or?? there is a centre hole in mine that you could use (like I did when had the Rumble speaker pods mounted on my handlebars prior to the fairing. Hope this picture helps, and no brand on mine, but any that are about those dimensions would fit. I think one of the 3 bag setups would as well or you could make them fit. The only thing to watch is if you have something like a tack mounted there now that would be in the way. Aftermarket risers likely wouldn't interfere at all as you see it rests just on the top of them in the pic. Also for reference my windshield is near the top of the travel too. If you lowered it that would make a difference also in hitting the risers.

[taranis]

Thanks guys. Looks the F&S one is the way to go.. $75! Ouch!