GPS install - Page 2

**2Paps** · 11-01-2013, 09:30 PM

Quote:

Originally Posted by HwyRider

You have to pull the headlight out. The wire is in my headlight bucket is tied to the rest of the wire loom inside the plastic cover. One of the wires is black/yellow which is the ground side.

After looking several times I am not able to find the connector you describe. Perhaps it is because I have ABS?

The 2 connectors that are taped to the wire loom are shown in the top right, just outboard of the rainbow comming out of the radio and in the center right by the fog light shield in the attachment

Fooch · 11-01-2013, 09:49 PM

It should be in the upper right hand corner of your pic. I also removed the left side speaker to get to them. It's just 2 female connectors hanging there. They're probably in the middle of that loom of wires you're referring to. But maybe they're not in the 2010 as I have a 2011. Just like the 2011 doesn't have the direct radio GPS connection but the 2012, or maybe it's the 2013, does have it. They are a little hard to find if they're there but keep digging

.

**HwyRider** · 11-01-2013, 10:33 PM

If you have an owner's manual for the bike it should tell you where the connectors are and the color of the connectors. In my manual it's on the last couple of pages under the General Information section.

**2Paps** · 11-09-2013, 02:45 AM

Well I finally found the 2 connectors, or rather the dealer found them for me. They were well hidden up at the top right of the radio.

Thanks to all who tried to assist.

11-01-2013, 09:49 PM	#17
Fooch Member Join Date: Mar 2012 Posts: 95	It should be in the upper right hand corner of your pic. I also removed the left side speaker to get to them. It's just 2 female connectors hanging there. They're probably in the middle of that loom of wires you're referring to. But maybe they're not in the 2010 as I have a 2011. Just like the 2011 doesn't have the direct radio GPS connection but the 2012, or maybe it's the 2013, does have it. They are a little hard to find if they're there but keep digging.
	0

11-01-2013, 10:33 PM	#18
HwyRider Join Date: Jun 2013 Location: South Shore, MA Posts: 4,629	If you have an owner's manual for the bike it should tell you where the connectors are and the color of the connectors. In my manual it's on the last couple of pages under the General Information section. __________________ VBA # 02424 VROC # 35971 2010 Nomad 1700 Metallic Diablo Black/Metallic Titanium
	0

11-09-2013, 02:45 AM	#19
2Paps Join Date: Sep 2013 Location: FL Panhandle Posts: 140	Well I finally found the 2 connectors, or rather the dealer found them for me. They were well hidden up at the top right of the radio. Thanks to all who tried to assist. __________________ 2010 GW w/CSC kit VBA #02592 Bash In the Bitterroots 2014 SE Rally in Nacoochee Valley 2016 Don't regret growing older, it's a privilege denied to many.
	0