|
![]() |
#16 | |
Member
Join Date: Sep 2018
Location: Ohio
Posts: 297
|
Quote:
https://www.amazon.com/Stahlbus-Drai.../dp/B01AMXASRY You'll need two of course.
__________________
'09 Nomad 1700 - Ivan's flash - Kuryakyn Alley Cat - V&H slip-ons - Triple hi/low beam H4 headlights - Desert Dawgs - Half the F&S Catalog Login or Register to Remove Ads
Last edited by BrokeAss; 05-26-2019 at 11:44 AM.
|
|
![]() |
![]() |
#17 |
![]() Join Date: May 2015
Location: Marietta, GA
Posts: 838
|
do your bikes have 1 or 2 drain ports? if so, do you put those quick drains in both or just not drain from both?
|
![]() |
![]() |
#18 |
Member
Join Date: Sep 2018
Location: Ohio
Posts: 297
|
The VN1700's are semi-dry sump, so there are two, and it's proper to drain both.
__________________
'09 Nomad 1700 - Ivan's flash - Kuryakyn Alley Cat - V&H slip-ons - Triple hi/low beam H4 headlights - Desert Dawgs - Half the F&S Catalog |
![]() |
![]() |
#19 |
![]() Join Date: May 2015
Location: Marietta, GA
Posts: 838
|
|
![]() |
![]() |
#20 |
Member
Join Date: Sep 2018
Location: Ohio
Posts: 297
|
This thread is a result of the OP having stripped threads in his pan. These Fast Drain contraptions are a good way to fix that once and for all by installing something threaded that never needs to be removed.
__________________
'09 Nomad 1700 - Ivan's flash - Kuryakyn Alley Cat - V&H slip-ons - Triple hi/low beam H4 headlights - Desert Dawgs - Half the F&S Catalog Login or Register to Remove Ads |
![]() |
![]() |
#21 |
Member
Join Date: Jun 2015
Location: knoxville tn
Posts: 227
|
have u considered a thread chaser -- different than a tap -- it cleans and partly repairs damaged threads without cutting away any metal -- just a thought -- i have used them succesfully if the damage isnt severe
|
![]() |
![]() |
#22 |
Member
Join Date: Sep 2018
Location: Ohio
Posts: 297
|
Chasers are great for straightening up buggered threads, but over-tightened drain plugs in aluminum pans tend to tear out all the threads and open up a larger, unthreaded hole. Tapping for a larger (and generally more aggressive) drain plug is a common fix.
__________________
'09 Nomad 1700 - Ivan's flash - Kuryakyn Alley Cat - V&H slip-ons - Triple hi/low beam H4 headlights - Desert Dawgs - Half the F&S Catalog |
![]() |
![]() |
#23 |
![]() Join Date: May 2015
Location: DBQ Iowa
Posts: 1,807
|
Ended up using the TIME SERT repair for this issue. Again, it was on a '12 Victory Cross-Roads. Still an aluminum case with the oil drain plug tapped directly into that aluminum. The TIME SERT uses a steel outer 'bushing", then the original plug can still be used. Yep, make the hole bigger, and hopefully better.
So far so good. ![]() ![]() Ride safe, Smokier |
![]() |