|
03-26-2022, 05:20 PM | #16 |
Jr. Member
Join Date: Mar 2022
Posts: 9
|
Thanks for the fast response redjay! Just like in post #3, all the reed valve stuff of my bike has been removed and plates are on -> no 16126/air switch valve. Should I leave the hose #3 like that, open/not plugged?
Login or Register to Remove Ads |
|
03-26-2022, 05:24 PM | #17 |
Top Contributor
Join Date: Feb 2008
Location: Ontario
Posts: 6,978
|
I would plug it and see how the bike runs ?
My responses are best guesses and not based on experience. I left everything intact on my 05 Nomad. |
|
03-26-2022, 05:28 PM | #18 |
Jr. Member
Join Date: Mar 2022
Posts: 9
|
Thanks for the fast response redjay! Like in post #3, all the reed valve stuff of my bike has been removed and plates are on -> no 16126 (air switch valve). Should I leave the hose #3 like that, open?
|
|
03-26-2022, 08:35 PM | #19 |
Top Contributor
Join Date: Feb 2008
Location: Ontario
Posts: 6,978
|
My best guess is no.
|
|
03-27-2022, 04:22 AM | #20 | |
Sr. Member
Join Date: Nov 2013
Location: The Newforest, England
Posts: 4,664
|
Quote:
__________________
when this you see, remember me, and bear me in your mind, let all the world say what they may, speak of me as you find. Login or Register to Remove Ads |
|
|
05-29-2022, 05:17 PM | #21 | |
Jr. Member
Join Date: Mar 2022
Posts: 9
|
Quote:
hose #1 throw it away and plug the fitting hose #2 throw it away and plug the fitting hose #3 connect it to inlet air pressure sensor I had some problems with idle when hose #3 wasn't connected to inlet air pressure sensor, actually no idle at all. Now she purrs like a cat. |
|
|
05-31-2022, 01:50 PM | #22 |
Jr. Member
Join Date: Mar 2022
Posts: 9
|
|
|
05-31-2022, 03:59 PM | #23 | |
Sr. Member
Join Date: Nov 2013
Location: The Newforest, England
Posts: 4,664
|
Quote:
__________________
when this you see, remember me, and bear me in your mind, let all the world say what they may, speak of me as you find. |
|
|
06-01-2022, 12:24 AM | #24 | |
Sr. Member
Join Date: Apr 2012
Location: West Coast, North Island, New Zealand
Posts: 1,375
|
Quote:
__________________
Nothing screams poor workmanship like wrinkles in the duct tape '02 1500 blonde Nomad (Sold) '97 800 burgundy Classic (Sold)
Last edited by Peg; 06-01-2022 at 12:28 AM.
|
|
|
06-01-2022, 02:30 AM | #25 | |
Sr. Member
Join Date: Nov 2013
Location: The Newforest, England
Posts: 4,664
|
Quote:
__________________
when this you see, remember me, and bear me in your mind, let all the world say what they may, speak of me as you find. |
|
|
06-01-2022, 05:13 PM | #26 |
Sr. Member
Join Date: Apr 2012
Location: West Coast, North Island, New Zealand
Posts: 1,375
|
Getting by, Mick... Getting used to the new normal. It's been a long hot summer down here, but made a sudden recent jump into mid-winter. I have to admit though - I've neglected the Voyager over the last few months, in favour of my new bike.
__________________
Nothing screams poor workmanship like wrinkles in the duct tape '02 1500 blonde Nomad (Sold) '97 800 burgundy Classic (Sold) |
|
06-09-2022, 06:07 AM | #27 |
Member
Join Date: Jun 2009
Location: Worcester, Massachusetts
Posts: 74
|
|
|
06-09-2022, 11:36 AM | #28 | |
Sr. Member
Join Date: Nov 2013
Location: The Newforest, England
Posts: 4,664
|
Quote:
__________________
when this you see, remember me, and bear me in your mind, let all the world say what they may, speak of me as you find. |
|
|