|
|
04-29-2014, 09:56 PM
|
#1 |
|
Jr. Member
Join Date: Apr 2014
Location: Keller, Texas
Posts: 7
|
Clutch Lever and Handlebars
I have the clutch lever adjusted to the lowest setting and I still have a little trouble reaching it easily. Does anyone know if an aftermarket lever is made for smaller hands. I have seen them for other bikes but can't find one for the Nomad.
My ride is a 2011 Nomad 1700. Also any tips on how to get the caps out where the handlebar mounts are, so that I can move the handlebars in a few inches. Thanks Rick De
__________________
Rick De Keller TX 2009 Sportster 1200c 2011 Nomad 1700 Login or Register to Remove Ads |
|
|
04-29-2014, 10:16 PM
|
#2 |
|
Mega-Contributor
Join Date: Sep 2007
Location: Where it doesn't snow...ever!
Posts: 21,926
|
Use a small flat head scewdriver or a knife to pop the riser clamp caps out. Sorry, I can't help you with the small hands issue. You need as much travel as possible with a hydraulic clutch.
__________________
Scott "Cactusjack" Hanks VBA #00105 H.O.G. #4250060 2011 H-D Ultra Limited 103ci  :: 2011 HD Electra Glide Ultra Limited w/Stage 1 :: Rallies: Mesquite '08|Custer '09|Cortez '10|Crescent City '11|Kanab '12|Antlers '12|Estes Park '13|Antlers '13|Orofino '14|The Dalles '17 |
|
|
|
04-30-2014, 09:40 PM
|
#3 |
|
Jr. Member
Join Date: Apr 2014
Location: Keller, Texas
Posts: 7
|
Thanks for the info
Taking off the caps was simple and once I moved the handlebar closer in the clutch lever no longer feels so wide.
__________________
Rick De Keller TX 2009 Sportster 1200c 2011 Nomad 1700 |
|
|
|
05-01-2014, 12:34 AM
|
#4 |
|
Member
Join Date: Nov 2013
Location: Osage county Oklahoma
Posts: 248
|
ImageUploadedByTapatalk1398918847.179910.jpg I have the same problem
|
|
|
Linear Mode
