|
06-28-2013, 08:29 PM | #1 |
Member
Join Date: Mar 2013
Location: Wilberforce, Ontario Canada
Posts: 455
|
Any suggestion are welcome
I started to change my front tire on my Voyager this afternoon and the front axle would not come loose, yes I removed the 2 bolts below the axle. I tried the suggestion of the 22mm bolt with the double nut but that sucker won't budge, has anyone had this problem and what did they try
Login or Register to Remove Ads |
|
06-28-2013, 10:02 PM | #2 |
Join Date: May 2009
Location: Montreal QC
Posts: 12,034
|
How big a power bar are you using? I haven't had this issue with the front axle, but when I have a large stubborn bolt or nut and can't use heat, I get out a 1/2 drive 20in power bar and slip a piece of pipe over it for extra leverage. You may want a helper sitting on the bike holding the bars tight. An impact gun may also be a good choice to break it loose.
__________________
Norm Ward 2008 blue / silver nomad kawanow / VBA #01136 |
|
07-31-2013, 04:16 PM | #3 |
Top Contributor
Join Date: Aug 2007
Location: The VooDoo Lounge
Posts: 5,780
|
Did ya get er dun?
__________________
2012 FLHTK |
|