|
10-27-2012, 09:38 AM | #1 |
Jr. Member
Join Date: May 2012
Location: Clyde,Ohio
Posts: 40
|
dobeck plugin
Another dobeck question. I just recieved a plug in unit Friday and the plugs connect directly to the injectors. How much of the bike do I have to take off to plug in the unit??
Login or Register to Remove Ads |
|
10-27-2012, 10:06 AM | #2 |
Join Date: May 2009
Location: Greenwood, Ark.
Posts: 4,736
|
The seat has to come off. I took the gas tank off too.
You dont have to. You can just raise the back of the tank up. Mitch did a good write up on this. Click here for more info.
__________________
Dave Jesse 2012 1700 Gray/Black Voyager 2006 1600 Nomad Green/Silver Sold VBA #1108 2010- Eureka Springs - Antlers - 2011- Maggie Valley - Antlers 2012- Margaritaville Ride - Van Buren - Antlers - 2013- Estes Park - Antlers 2014- Mountain View - Antlers - 2015- Eureka Springs - Antlers 2016- Salem - Antlers - 2017- Eureka Springs - Lake George - Antlers - 2018- Custer - Antlers |
|
10-27-2012, 10:13 AM | #3 |
Jr. Member
Join Date: May 2012
Location: Clyde,Ohio
Posts: 40
|
Thanks for the quick reply back. It's raining out side. So it's a good time to work on it. ohiojack
|
|
10-29-2012, 10:28 AM | #4 |
Sr. Member
Join Date: Sep 2009
Location: Owasso, OK
Posts: 1,485
|
That's the write-up I used to install mine. Just raised up the rear of the tank and was able to squeeze my hands in there to get the job done. Good luck!
__________________
Matt "Mo" Moore Owasso, Oklahoma VBA #1250 2005 Nomad 1600 - Darkside "There is no normal life, there's just life. So get on with it." - Doc Holiday |
|