|
|
|
|
|
Thread Tools | Search this Thread | Display Modes |
04-29-2014, 05:34 PM | #1 |
Jr. Member
Join Date: May 2010
Location: North Western Pennsylvania
Posts: 13
|
Question about LCD Display - New (left over 2013) Voyager
The LCD where the Kawi logo and radio stations display seems to always come up blank, but still lighted, when I turn on the ignition after the bike has set for awhile. Just wondering if this is normal?
Once I think I had to turn the ignition off and back on again a couple more times before it would display. Last few times I just turn off once and back on and it works, but always seems to be blank initially after setting. Is this normal? Radio works okay while the display is off.
__________________
BillyBob '96 BUBF - "Ellie Mae" - Gone but not forgotten '01 Nomad "Bling" - Had a good run, maybe see her around '13 VN1700B Voyager "Bruiser" - 1st "new" bike, beginning @ 5 miles Login or Register to Remove Ads |
|
04-29-2014, 09:23 PM | #2 |
Sr. Member
Join Date: May 2009
Location: Overland Park, KS
Posts: 1,135
|
It's under warranty - I'd take it to the dealer and have them check it out.
__________________
Glenn petenomad Peterman 2016 BMW R1200RT 2012 Candy Arabian Red Concours - Traded at 23000 miles 2008 Red/Black Nomad - Traded at 29500 miles |
|
04-30-2014, 01:02 AM | #3 |
Advanced Member
Join Date: Mar 2014
Posts: 562
|
Ditto. Doesn't seem normal.
__________________
2006 Nomad 1600 v&h duals, fi2000 grasshopper (kawboysix) |
|
04-30-2014, 05:05 AM | #4 |
Jr. Member
Join Date: May 2010
Location: North Western Pennsylvania
Posts: 13
|
Thanks for the replies. I didn't think it was right, and will be visiting the dealer. I was curious as to whether anyone else had this issue, so thought I'd post.
__________________
BillyBob '96 BUBF - "Ellie Mae" - Gone but not forgotten '01 Nomad "Bling" - Had a good run, maybe see her around '13 VN1700B Voyager "Bruiser" - 1st "new" bike, beginning @ 5 miles |
|
04-30-2014, 07:19 PM | #6 |
Member
Join Date: Aug 2012
Posts: 68
|
Mine actually has lit up a couple times without it even turned on or the key in the on Position.I was worried I may of had a short somewhere,but it has not done it for quite awhile now,but all works properly.
|
|