|
06-13-2013, 07:22 PM | #1 |
Sr. Contributor
Join Date: Apr 2008
Location: Tamworth New Hampster 06 1600
Posts: 12,484
|
WTB cheap stock Nomad horn
My stock horn chit the bed today. I was trying to beep at a guy who's saddle bags were not closed and his stuff was blowing out.
Besides maybe tooting at a squirrel inspection is the only time I need any horn. Maybe i will replace it with a light for the hard of hearing No way am I tossing good dollars to a horn I won't ever use. CHEAP is the key word here.
__________________
06 1600 Nomad Just call me Mac molon labe come and get it Login or Register to Remove Ads |
|
06-13-2013, 07:33 PM | #2 |
Sr. Member
Join Date: Mar 2009
Location: Newburgh IN
Posts: 3,404
|
I sent you a PM.
Bob
__________________
VBA #01084
"A well regulated militia being necessary to the security of a free State, the right of the People to keep and bear arms shall not be infringed." |
|
06-13-2013, 08:16 PM | #3 |
Sr. Contributor
Join Date: Apr 2008
Location: Tamworth New Hampster 06 1600
Posts: 12,484
|
Pm replied too..... Thanks Bob
end of issue.
__________________
06 1600 Nomad Just call me Mac molon labe come and get it |
|
06-14-2013, 06:47 AM | #4 |
Member
Join Date: Apr 2008
Location: spring hill florida
Posts: 477
|
did you get one, if not I have one
|
|
06-14-2013, 11:13 AM | #5 |
Sr. Contributor
Join Date: Apr 2008
Location: Tamworth New Hampster 06 1600
Posts: 12,484
|
yes i did... Bob is sending one for the cost of shipping, which i won't know till I have the horn.
I would spring for a better horn, but seriously Moose just don't give a damn. Last Sunday we took a ride up past where 'The Old man of the Mountains' used to be, and from there after seeing Lupine flowers (alpine plants) We went to the Weirs. That must be 45 miles on the interstate and that whole way 1 car followed me and the only other car i saw was state police parked in the medium. On a rare occasion I toot the horn at a bird or a squirrel. Mainly it is for getting a sticker.
__________________
06 1600 Nomad Just call me Mac molon labe come and get it Login or Register to Remove Ads |
|
06-14-2013, 03:58 PM | #6 |
Top Contributor
Join Date: Aug 2007
Location: Greensboro, NC
Posts: 5,915
|
Mac, did you try to adjust the horn?? Mine did the same a year or so ago and I used the little screw on the back and got it working again. I'm with you....never use the damn thing but need it to pass the the State boys little inspection show here in NC.
__________________
Todd Frazier VBA #0003 VBA National Leader-USA Operations/Garage Moderator - RETIRED 2006 Black Nomad since she was born Greensboro, NC |
|
06-14-2013, 06:08 PM | #7 |
Member
Join Date: Apr 2008
Location: spring hill florida
Posts: 477
|
my thought is, if you have to blow your horn in most cases its too late, loud pipes work better
|
|
06-14-2013, 08:52 PM | #8 | |
Sr. Contributor
Join Date: Apr 2008
Location: Tamworth New Hampster 06 1600
Posts: 12,484
|
Quote:
I carry a ice pock test light and checked the fuse first with out pulling it. had power on both sides. Went to the horn and peeled back the rubber insulators on the spades and with the light hooked up had power pressing the button.. Dead horn.. I can't see how to pry the bloody SOB apart to just save the case...
__________________
06 1600 Nomad Just call me Mac molon labe come and get it |
|
|
06-14-2013, 09:01 PM | #9 | |
Sr. Contributor
Join Date: Apr 2008
Location: Tamworth New Hampster 06 1600
Posts: 12,484
|
Quote:
There is this little problem in NH you no longer have in Fla. Once you had the same problem and i know you dod but i know you don't now. It's called state inspection where the state sticks it's nose into a citizens private bee's wax. And so for that I need a horn. I can yell louder than these anemic toy horns can sound off. I try to rode as quiet as I can since most single rides are not less than 180 miles. pretty much if i turn the key I go no less than that as a minimum. Being this is Laconia Bike week my nomad is silent compared to the sounds coming off these fire breathing bar hopin' dragons. If my Nomad made that kinda noise I;ld need a drink each 5,200 feet too It's been awhile now i rode Nomad as I has a 01 and have a 06.. I wish I wish upon a star the camshafts will come out and a bog throttle body too! I am a little sick of these economy cams.... I don't want totally radical as i have no wish to twist the bevel gear out of the case, but a little more power should be too much to ask...... should it?
__________________
06 1600 Nomad Just call me Mac molon labe come and get it |
|
|
06-15-2013, 08:33 AM | #10 |
Sr. Member
Join Date: Jan 2008
Location: Cartersville, Georgia
Posts: 4,838
|
Mac, I wanted a little more power (torque) out of my Nomad for when I'm towing my trailer. I installed an ECU out of a 1600 Meanie. It immediately gave me a noticeable increase in power, and about 600 more RPMs at idle (idled around 1500 RPMs). It was great until you reached ~3000 RPMs and then it wouldn't go any higher. Couldn't do anything with the TFI to correct. I called Dobeck Performance, and the tech was very helpful. He explained that I was trying to adjust something that wasn't there and suggested that I go with the Meanie injectors. The injectors are not interchangeable, so I ended up changing the throttle body/intake manifold assembly and I'm VERY pleased with the power increase. The power increase is about the same as when I did the pipes/intake/& TFI. I do have a set of '04 Meanie 1500 heads and cams waiting to go on when I get the time. The 1600 Meanie cams are the same as the 1600 Nomad cams, but the 1500 cams have more lift. The heads are the same in both Meanies.
__________________
Cliff "VulcanE" Evans 2005 Blue & Silver 1600 Nomad VBA # 320 VROC # 20381 |
|
06-15-2013, 09:03 AM | #11 |
Sr. Contributor
Join Date: Apr 2008
Location: Tamworth New Hampster 06 1600
Posts: 12,484
|
That is interesting. Which cams will you go with? Does the meanie have bigger valves too?
__________________
06 1600 Nomad Just call me Mac molon labe come and get it |
|
06-15-2013, 09:17 AM | #12 |
Member
Join Date: May 2011
Location: Lillington, NC
Posts: 138
|
Mac: If you still need a horn, shoot me your address, and I'll send you my stock one - no charge.
It's the least I can do for all the great info I've gotten from reading your posts here...
__________________
VBA#1825 | VROC#35779 2007 Vulcan Nomad 1600 - The Black Pearl 2001 Vulcan Classic 1500 - R.I.P. Quadzilla Fairing | HD Tour-Pak | WompusRack | V&H Baggers | PhatRiser II | JTD Lowers | Chuckster Ultimate Baffles & Single Plate Intake with K&N Filter | Dobeck TFI | Kuryakyn ISO Grips, Pegs, and Covers | Mustang Seats | Stebel Nautilus & Wolo Bad Boy Horns | Smoke Signal Lenses | F&S Lightbar | Shinko White Walls | TireGard Pressure Monitor | RAM mount | JVC/Soundstream/Polk Audio @520 watts |
|
06-15-2013, 09:22 AM | #13 | |
Join Date: Jul 2007
Location: Peoples Republic of New York State
Posts: 15,154
|
Quote:
Maybe instead of relying on loud pipes to save your ass you should practice and learn how to ride a bike safely.
__________________
Tim "TC" Conley VBA #9 2011 Victory Kingpin mine 2013 Victory Boardwalk -hers [LEFT][COLOR=#000000] [SIZE=4] |
|
|
06-15-2013, 09:37 AM | #14 | |
Top Contributor
Join Date: Aug 2007
Location: Greensboro, NC
Posts: 5,915
|
Quote:
Saw that one coming a mile away yes I did.
__________________
Todd Frazier VBA #0003 VBA National Leader-USA Operations/Garage Moderator - RETIRED 2006 Black Nomad since she was born Greensboro, NC |
|
|
06-15-2013, 10:07 AM | #15 |
Sr. Member
Join Date: Jan 2008
Location: Cartersville, Georgia
Posts: 4,838
|
I have a set of 1500 cams, and the matching heads off a '04 1500 Meanie with 4700 miles on them. The 1500 cams do have more lift than the 1600 cams, so it will lope . The 1600s and 1500s (Meanies) do use the same heads, and the intake and exhaust valves are bigger than the Nomad's or Classic's. It may be this winter, or even next, before I get around to changing them out, but I'm looking forward to it.
__________________
Cliff "VulcanE" Evans 2005 Blue & Silver 1600 Nomad VBA # 320 VROC # 20381 |
|