|
05-10-2018, 01:35 PM | #17 |
Member
Join Date: Nov 2014
Location: Auburn Al
Posts: 247
|
I did this back in August. I got my races out by first grinding a scallop in 3 places on the top side of the race as you see in the pic. I got it deep enough that I could get a long screwdriver/drift pin from the top. I used a cone grinding head on my dremel and once you get it going it cuts pretty good. Few good whacks with the driver rotating around the race and it will pop out. I did the same thing for the top race as well.
Just clean the shytz out of it when your done as the chips left around will not be good on the bearings. I sprayed carb cleaner from the top and used air to get them out of there. I used a small 2x4 to start the race back in the frame, then used the old race flipped upside down to drive it home. You can see the condition of my brng from the previous owner... UGHH
__________________
2019 1700 Voyager VBA #02943 |
|
05-10-2018, 03:37 PM | #18 |
Sr. Member
Join Date: Jul 2016
Location: Somewhere South of Alaska....
Posts: 2,359
|
Tighten lower stem nut & steering stem nut to the specs in the book for your individual bike....
Just let me say this, once your bearings are replaced, if you install a zerk fitting, you'll never ever have to disassemble again for lube....
__________________
--------------------- Don't start no schit, there won't be no schit.... *My Sarcasm is directly proportional to the amount of Stupidity involved* --------------------- VBA#03239 VROC#37400 VRA --------------------- 2014 Vaquero 2001 Nomad FI 2003 Street Glide (sold) 1500 Meanie, fresh rebuild (sold) 90s BUBF Bobber (sold) 2001 UltraCycle FatPounder (Sold) 1975 HD ElectraGlide (Sold) 1982 Kawasaki Z1 Chopper (Sold) Suck It Up & Ride! |
|
05-18-2018, 09:05 AM | #19 | |
Advanced Member
Join Date: Aug 2012
Location: Morrow, Ga.
Posts: 830
|
Quote:
__________________
02 1500 Nomad (07 1600 Motor) 160,000 Red & Black 12" mini apes Galfer lines (6' over) EJK Dobeck Reckless Fairing. Led H4 headlight All LED lights Rockford Fosgate radio |
|
|