|
08-24-2020, 03:40 PM | #1 |
Member
Join Date: Jul 2015
Location: AJ, Arizona
Posts: 57
|
Fork Seal Driver Question...
I edited this as I figured out the seal driver question but when I pulled the lock bolts that are in bottom of each fork, one had the brass washer and one did not? Surely both sides should have a washer correct? It wasn't leaking but figured I should go see if I can find another washer at the hardware store.
thx!!! Login or Register to Remove Ads
Last edited by virtualgeorge; 08-24-2020 at 10:40 PM.
|
|
08-25-2020, 02:15 PM | #2 | |
Member
Join Date: Jan 2009
Posts: 496
|
Quote:
Not sure what bike you have but guessing it's a 1600 so look at this link https://www.bikebandit.com/oem-parts...49068sch439477 It shows washers for each fork. It's for a 2006 Nomad but I think the forks where relatively unchanged over those years. Bottom line is that there should be a washer on each fork bottom. Hope this helps, |
|
|