|
08-11-2017, 10:18 AM | #1 |
Advanced Member
Join Date: Feb 2012
Location: Starke Florida
Posts: 856
|
Installing Lightbar
would like to hear from anyone that has installed aftermarket light bar.
is it difficult to install? splice wires, or plug in? thanks for any help/advice!
__________________
"Ride it like you stole it"! 2008 1600 Nomad 56K miles "BlueBelle" 2004 1500 Nomad 102 K miles "Black Beauty" ABATE Black Creek Chapter Amvet Rider Post 86 http://www.facebook.com/AmvetPost86 Weston A. Price Foundation member. Vegetarian...... An old Indian word meaning "Bad Hunter" Legalize Freedom! Question Authority! "Im in love with the waitress, and I dont even know her name" "Boys" Gone Wild" ! Mainstreet Station 2012 Daytona Bikeweek Login or Register to Remove Ads |
|
08-11-2017, 11:00 AM | #2 |
Member
Join Date: Nov 2014
Location: Auburn Al
Posts: 247
|
I put one on few years back. Cobra brand. Was not hard at all. Adjusting the dman thing was the hard part for me lol.
I highly recommend using a relay. I came off the hot from my headlight for the trigger so the LB would come on with my headlights. Worked great. You can get relays anywhere. I just bought 6 of them W/ a wired connector off ebay for cheap. I don't need 6 but I have them when I need them lol Relays are your friend!!!!!!!
__________________
2019 1700 Voyager VBA #02943 |
|
08-11-2017, 11:54 AM | #3 |
Join Date: May 2009
Location: Greenwood, Ark.
Posts: 4,736
|
As already mentioned you should definitely use a relay.
If you want it to come on with the head light than use that to trigger it. Power source connects to 30 Ground to 85 Trigger to 86 Load to 87 I attached a picture of a relay in case you need it.
__________________
Dave Jesse 2012 1700 Gray/Black Voyager 2006 1600 Nomad Green/Silver Sold VBA #1108 2010- Eureka Springs - Antlers - 2011- Maggie Valley - Antlers 2012- Margaritaville Ride - Van Buren - Antlers - 2013- Estes Park - Antlers 2014- Mountain View - Antlers - 2015- Eureka Springs - Antlers 2016- Salem - Antlers - 2017- Eureka Springs - Lake George - Antlers - 2018- Custer - Antlers |
|
08-11-2017, 10:21 PM | #4 |
Sr. Member
Join Date: Feb 2009
Posts: 1,329
|
I totally agree the relay is the way to go. I prefer to trigger the relay from the running light wire. It also comes on with ignition but if you lose your headlight power for any reason, you still have the driving lights. Good choice for me as recently I have been having intermittent headlight out problems. (Probably related to stator/rectifier issues.)
I also intercepted the power wire at the light bar and ran it to a simple switch on the handlebar. That way I can run without them if I need to. Mine are higher wattage and I don't need the extra power drain if I am in traffic. If I stick with this bike I will likely go to LED in the driving lights too.
__________________
Hammer aka CrocHammer KawaNow#00988, VROC#26389, VR#2202 Abbotsford, BC, Canada 2006 Black Nomad |
|
08-12-2017, 09:19 AM | #5 |
Join Date: Jan 2009
Location: Psychiatric Ward FL
Posts: 3,429
|
Get Chuckster's lights, they install using 2 of the windshield bracket bolts on each side.
They arrive with the relay and everything needed to install them correctly. The instructions are easy to follow. And they're priced right.
__________________
MT 2016 FLHP Psychiatric Ward FL VBA 936 Login or Register to Remove Ads
Last edited by MAS Tequila; 08-12-2017 at 09:21 AM.
|
|
08-12-2017, 09:23 AM | #6 |
Sr. Member
Join Date: Mar 2010
Location: Tallahassee FL
Posts: 1,037
|
Chucksters lights also easier to adjust once installed.
|
|
08-12-2017, 09:59 AM | #7 |
Sr. Member
Join Date: Jan 2008
Location: Cartersville, Georgia
Posts: 4,838
|
Like everyone else said, use a relay. Mine is the Cobra brand, and it wasn't hard to install, but after a few times of removing it (I have to, to remove my fairing), I made longer wires to it so I could just remove the 2 mounting bolts under the triple tree, and rotate it forward and lay it on my front fender with a towel to protect the fender.
__________________
Cliff "VulcanE" Evans 2005 Blue & Silver 1600 Nomad VBA # 320 VROC # 20381 |
|
08-13-2017, 04:56 PM | #8 |
Sr. Member
Join Date: Oct 2007
Location: Dedham Maine
Posts: 4,199
|
I also use a relay on mine! I wired it to shut off when the high beam comes on ! In some states that is the law!I use my old broken Honda light bar I also mounted my spots on my crash bars with P clamps and that give a nice triangle light pattern
__________________
|
|
08-13-2017, 06:48 PM | #9 |
Join Date: Jan 2011
Location: Minnesota
Posts: 939
|
Have the Kaw brand light bar. Had to reuse the rubber gromets from the stock turn signals on the new light bar and plug the wires into the aux plugins in the head light housing. they are only on when using low beam. Do not know if 1600 have aux hook up in head light.
__________________
Ray Minnesota 2010-1700-Nomad VBA#01525 |
|
09-09-2018, 06:20 PM | #10 |
Jr. Member
Join Date: Sep 2018
Location: Bowie, MD
Posts: 6
|
Cobra Light Bar
Good day,
Rainy day so I started early before any of the games would start, installed a new light bar made by Cobra $223.27 Very simple installation, didn’t add a relay but I’ll follow everyone’s suggestion and put one at a later time. There is a accessory terminal in the headlight housing where I powered them up. The two lower side air deflectors had to be removed, but I left the brackets, thinking of installing something else later on.
__________________
Just a little over a year experienced bike rider. First bike ever one year ago 09 Honda VTX750 Show me the signs along the way, and give me the wisdom to take the right road. Protect me from the road debris thrown at me by the enemy and guide me safely around the potholes in my paths. When I ride into the darkness, Be my headlight. |
|
09-09-2018, 08:44 PM | #11 |
Member
Join Date: Nov 2009
Location: Lititz, PA
Posts: 432
|
I would echo that Chucksters is a simple and uncluttered setup. I wired mine to be PA compliant for inspection, which means the relay is triggered by the headlamp low beam, and goes off with high beam. I also have a switch in the power circuit so I can turn them off if desired. i don't use that function very often, as I like to be seen, as well as to see.
__________________
I used to be indecisive, but now I am not so sure... Yoda VBA #01311 SCRC Chapter 289 07 Nomad |
|
09-10-2018, 01:13 AM | #12 |
Advanced Member
Join Date: Nov 2014
Location: Banner, WA
Posts: 644
|
Agree on the relay. I bought the Cobras before I even knew Chucksters was selling them. They are beautiful quality and easy to install but the lights slave off of the headlight wire, a goofy set up. I should have installed a relay and the new owner will be doing so.
__________________
Mike USN Retired 2007 Nomad |
|