Register FAQ Upgrade Membership Community Calendar Today's Posts Search
Go Back   Vulcan Bagger Forums > Technical :: Maintenance :: Performance > 1500 & 1600 Nomad

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 08-19-2009, 06:01 PM   #1
kudzufarmer   kudzufarmer is offline
Member
 
Join Date: Jul 2009
Posts: 358
2005 Nomad front wheel question

I had Avon Cobra's put on a 2005 nomad today.......while I was looking at it I noticed that the front tire was mounted backwards as the cobra's are unidirectional........looking further i noticed that the direction of the cut outs in the wheel were going in the wrong direction......(small end of cut out forward)......looking at the rear wheel the large end was forward.....as the rear wheel only has 1 disk and can't be reversed ,is it possible that the tire is mounted correctly and the wheel is mounted reverse.....is the distance on each side of the center of the hub the same on both sides with the spacer on the left side as you are facing the front wheel (to the right if you are sitting on the seat)....looking at stock pictures of the 05 it looks like the correct wheel direction is with the large end of the cutout forward.

If it is just the wheel i can change that w/o a 30 mile round trip.....if the tire is mounted wrong then I will make the trip.


Thanks for any feedback



Login or Register to Remove Ads
 
Reply With Quote
 



Similar Threads
Thread Thread Starter Forum Replies Last Post
Front Wheel Noise biscuitsngravy 1500 & 1600 Nomad 9 10-21-2010 09:05 AM
2006 Nomad Front Wheel Question metalman Vulcan Nomad/Vaquero/Voyager 3 03-24-2010 08:34 PM
front wheel medicaldawg 1500 & 1600 Nomad 8 09-04-2009 01:47 PM
FRONT WHEEL??? spirello 1500 & 1600 Nomad 10 08-20-2008 01:51 PM
Front wheel wobbles nomadwest Vulcan Nomad/Vaquero/Voyager 24 07-11-2008 06:04 PM



Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.