cruise control install

[macmac]

I don't have leds or that CC.. Re thinking maybe a relay isn't all that bad of an idea to try out.

I am not sure how leds will like this, but it shouldn't harm them to run this as a test.

This entire bit is a test, so don't try to make anything wired in for real untill you know if it works.

Using a SPST standard relay, the same for driving passing lamps wire it this way.

T-30 from brake light wire
T-86 from brake light wire

so simply build a Y from the brake light wire and plug into these T terminal numbers on the relay. Both terminals will be energized by either brake lever or pedal.

T-87 will be the other side of the brake wire, so you will have to cut the wire somewhere in line
T-85 will go to the CC wire that sees volts.

I wish I could say 'I know this will work" but I don't. I think it will..