OIL PLUG/SCREEN

[kawbuc]

I am told that i should pull the oil screen out when i change oil and clean the screen. Cant seem to locate it. Can someone direct me?
thanks

[Scoot]

It's on left side of bike. With kickstand down about 2" toward the rear under the bottom fram.
the part number for the bolt to look for is 11012

[jussmatt]

kawbuck... it's on the bottom most part of the oil case. Bolt w/ a big round washer looking thing attached.... Like Scoot's pic above... 11012... It's one of those bolts that you think you shouldn't be removing...but it's ok!!! LOL! At least that was what I thought the first time I removed it! The break out above is exact....just have to trust it! LOL

[kawbuc]

Is that the screen between # 92071 and 92022 ?

[jussmatt]

Originally Posted by kawbuc

Is that the screen between # 92071 and 92022 ?

Yepper...that's it! I, like most on here, had some very interesting stuff in mine!! The first time you take it out...just be aware of the order and orentation of parts, so it'll go back together easier.

[kawbuc]

Thanks you guys. Great info.

[Scoot]

Originally Posted by kawbuc

Thanks you guys. Great info.

anytime, glad to help

[redjay]

Hi, I was going to do an oil change and pull the screen but on the exploded parts diagram there seems to be a few parts that could fall out (92071 and 92022). Does the screen go in a hole in the engine casing or into the sump itself ? How do you keep the parts in place as you
re install them. Thanks.

[jussmatt]

redJay...its really not as bad as it seems in the exploded view. The parts all fit together and fit into the casting like you said. Like I was telling kawbuc...just pay attention to the order parts come out the first time. You really can't mess it up.... it just makes sliding it all back in easier if you know how it all came out. Trust me when I tell you that if I can do it...ANYBODY can!!!

[Top Cat]

I've changed my oil 3 times and I don't even remember seeing #'s 92022 and 92071 :-/

[watchman]

022 is the flat washer that usually stays on the screen rubber when you take the spring off and 071 is inside the engine and does not come out when you pull the screen. Just be sure the rubber on the screen goes back in the hole first.

[ice793]

trust them easier than it looks in the exploded view,cant mess up

[macmac]

That is the only and best place to really drain off the oil, so no need to pull the so called real drain plug..

I did loose some gold flakes, just incase you discover gold... In that case it's mine!

[spirello]

I change my oil all the time, and last night i finnaly took the screen out never have before. I always used the drain plug. The bike has 20k on it and the screen was as clean as ever. I have heard some of you with a decent amount of debrie on yours. what kind of stuff was on yours???

[Top Cat]

Some guys find little pieces of gasget material , one if I remember right, found a tiny piece of plastic packaging. I didn't find anything in mine either but as Forrest Gumps Mom says " you never know what your gonna get"