|
|
12-31-2011, 09:53 PM
|
#1 |
|
Sr. Member
Join Date: Mar 2009
Location: New Braunfels, Texas
Posts: 1,162
|
Turn Signal Sick
The right hand turn signals on the 03 Nomad are blinking at a double rate like a bulb is burnt out, but no bulb is out. Ideas? I'm thinking turn signal control unit.
__________________
Brik VBA #1047 07 Electra Glide Ultra (43,300 & counting) 03 Nomad - 37,972 (traded 5/6/13) 99 Nomad - Only a memory since 4/27/13 Login or Register to Remove Ads |
|
|
12-31-2011, 11:04 PM
|
#2 |
 
Join Date: May 2009
Location: Montreal QC
Posts: 12,034
|
Could be, page 565 of the 1600 shop Manuel has some diagnostic tests you can do on the control relay, not sure if it is the same for the 03
__________________
 Norm Ward 2008 blue / silver nomad kawanow / VBA #01136
Last edited by cnc; 12-31-2011 at 11:08 PM.
|
|
|
|
01-01-2012, 11:35 AM
|
#4 |
Join Date: Aug 2007
Location: Newmarket Ontario Canada
Posts: 35,387
|
It could be a number of things, check the easy stuff, like the two front signal bulbs and the flasher unit.
If a front filament breaks it can sometimes land across the other running light filament and cause a proplem like you describe. I would replace it with another bulb to check that first.
__________________
 2002 Nomad aka Bountyhunter VBA #27 VROC #18951 |
|
|
Linear Mode
