Bracket dimensions needed, please.

sas · 05-28-2011, 01:53 PM

Perhaps one of you 1500 Nomad owners who have the one piece chrome rail (Rear Fender Trim, PN K53020-247) that attaches under the chrome covers above the saddlebags and comes down along the outsides of the fender on your bike would be willing to help me out.

I’ll receive the chrome rail next week but there is a triangular shaped bracket that is missing from the rail. That bracket has two holes at the top and it attaches to the turn signal bar under the fender. In turn, there is a one hole tab on the rail that attaches to the bracket at the bottom. This bracket is what I don’t have and I’m going to have to fabricate one.

I need the dimensions of the width of the bracket left to right at the top and the space between the top two holes based on centerline. I also need the length top to bottom of the bracket and the single hole location up from the bottom of the triangle. If I recall correctly, when I put one of these rails on Lola, there was at least one bend below the two top holes. This would be to allow the bracket to line up with the single hole of the rail. I know this sounds a bit confusing, but if anyone would be willing to take these measurements for me I’d sure be greatful!

sas · 05-29-2011, 01:36 PM

Bump

vidornomad · 05-31-2011, 08:42 AM

Sas, I will be happy to get them dimensions, but not 100% sure which one. When I get home this evening I will look and see. I looked up the part number and it looked like it bolted near the blinker assy. I don't think mine does that but I will look and see.

sas · 05-31-2011, 09:28 AM

I appreciate that vidor!

vidornomad · 06-01-2011, 12:38 PM

Sas,
I am so sorry, I got side tracked and did not get home till late yesterday, I WILL TODAY get that info.

vidornomad · 06-01-2011, 06:29 PM

I need the dimensions of the width of the bracket left to right at the top (4.5")and the space between the top two holes based on centerline.(3" holes are 3-3/4) I also need the length top to bottom of the bracket (9"). Hope this helps let me know and I will get more.

sas · 06-05-2011, 03:09 PM

Thank you kindly. I found out that the rail I have is fro a Ckassic and not a Nomad. However, I'm gonna find a rail for the Nomad and I'll still need that bracket. I'll use these dimensions for sure.

05-28-2011, 01:53 PM	#1
sas Member Join Date: May 2010 Location: McComb, MS Posts: 309	Bracket dimensions needed, please. Perhaps one of you 1500 Nomad owners who have the one piece chrome rail (Rear Fender Trim, PN K53020-247) that attaches under the chrome covers above the saddlebags and comes down along the outsides of the fender on your bike would be willing to help me out. I’ll receive the chrome rail next week but there is a triangular shaped bracket that is missing from the rail. That bracket has two holes at the top and it attaches to the turn signal bar under the fender. In turn, there is a one hole tab on the rail that attaches to the bracket at the bottom. This bracket is what I don’t have and I’m going to have to fabricate one. I need the dimensions of the width of the bracket left to right at the top and the space between the top two holes based on centerline. I also need the length top to bottom of the bracket and the single hole location up from the bottom of the triangle. If I recall correctly, when I put one of these rails on Lola, there was at least one bend below the two top holes. This would be to allow the bracket to line up with the single hole of the rail. I know this sounds a bit confusing, but if anyone would be willing to take these measurements for me I’d sure be greatful! __________________ "Growing old takes time. Use it wisley." Login or Register to Remove Ads
	0

05-29-2011, 01:36 PM	#2
sas Member Join Date: May 2010 Location: McComb, MS Posts: 309	Bracket dimensions needed, please. Bump __________________ "Growing old takes time. Use it wisley."
	0

05-31-2011, 08:42 AM	#3
vidornomad Member Join Date: Mar 2009 Location: Vidor, Texas Posts: 346	Bracket dimensions needed, please. Sas, I will be happy to get them dimensions, but not 100% sure which one. When I get home this evening I will look and see. I looked up the part number and it looked like it bolted near the blinker assy. I don't think mine does that but I will look and see.
	0

05-31-2011, 09:28 AM	#4
sas Member Join Date: May 2010 Location: McComb, MS Posts: 309	Bracket dimensions needed, please. I appreciate that vidor! __________________ "Growing old takes time. Use it wisley."
	0

06-01-2011, 12:38 PM	#5
vidornomad Member Join Date: Mar 2009 Location: Vidor, Texas Posts: 346	Bracket dimensions needed, please. Sas, I am so sorry, I got side tracked and did not get home till late yesterday, I WILL TODAY get that info. Login or Register to Remove Ads
	0

06-01-2011, 06:29 PM	#6
vidornomad Member Join Date: Mar 2009 Location: Vidor, Texas Posts: 346	Bracket dimensions needed, please. I need the dimensions of the width of the bracket left to right at the top (4.5")and the space between the top two holes based on centerline.(3" holes are 3-3/4) I also need the length top to bottom of the bracket (9"). Hope this helps let me know and I will get more.
	0

06-05-2011, 03:09 PM	#7
sas Member Join Date: May 2010 Location: McComb, MS Posts: 309	Bracket dimensions needed, please. Thank you kindly. I found out that the rail I have is fro a Ckassic and not a Nomad. However, I'm gonna find a rail for the Nomad and I'll still need that bracket. I'll use these dimensions for sure. __________________ "Growing old takes time. Use it wisley."
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2002 stock seat bracket needed	skiman	Wanted	3	06-02-2011 10:02 AM
Looking for Memphis Bracket	vidornomad	Wanted	8	05-06-2011 03:36 PM
bracket	rhunt4	1500 & 1600 Nomad	23	04-10-2009 08:13 AM
Battery dimensions	rcmedic	1500 & 1600 Nomad	3	01-07-2008 07:02 PM
Need the dimensions of the OEM windshield bolts	mikesth	Vulcan Nomad/Vaquero/Voyager	3	12-01-2007 06:14 AM