|
|
|
|
06-17-2021, 05:19 PM
|
#1 |
|
Jr. Member
Join Date: Jun 2021
Posts: 3
|
1997 1500A11. No spark.
97 vn1500A11. No spark, it turns out that someone has changed the wiring harness appears to be from a 91-95 A model or a D1 model. I’ve made the changes to the harness (there’s only a few small differences, but they do have to do with the CDI) and still no spark. I’ll check for the resistor on the grey wire. What does the resistor look like? Wonder why it’s not in the SM? If anyone could send or post pictures of their IC/CDI igniter plugs I would really appreciate that too! Needing to make sure that all the connectors are in the right slot of the plastic housing. Thanks in advance.
Login or Register to Remove Ads
Last edited by Jasonridin; 06-17-2021 at 05:20 PM.
Reason: Keyboard error
|
|
|
06-18-2021, 05:48 AM
|
#2 |
 Join Date: Oct 2013
Location: chandler okla
Posts: 854
|
the resistor is jumpered in the back of the ign switch .
|
|
|
|
06-19-2021, 04:41 PM
|
#3 |
|
Jr. Member
Join Date: Jun 2021
Posts: 3
|
Harness plug wire locations.
Could you send me a picture of the cdi connectors that show what color wires belong in which holes?
|
|
|
|
06-20-2021, 11:16 AM
|
#4 |
|
Member
Join Date: Jul 2010
Location: Midlothian, TX
Posts: 94
|
Here's a link to service manual page wiring diagram page(221) - ignition switch is shown towards bottom center of diagram, page 220 lists the wire color codes.
You can download a PDF copy of the complete manual or if you select print page, you can save the page as a PDF https://www.manualslib.com/manual/80...age=221#manual Hope this helps you out. I had a 1998 1500A for several years, had a lot fun with it.
__________________
Tom Harrington 07 Black Nomad (totaled 5/5/18) 02 Silver Goldwing / 03 Sliver Bushtec Quantum GL |
|
|
Hybrid Mode