Idaho's jack adapter - Safety Notice

[Idaho]

Okay, I feel like a dumb sh!t. I have been worried about one of you driving off on your Nomad with the adapter still attached to the bottom of the bike. I've even asked you to tie a string between the pins long enough to go over the seat to ensure that you will remember that it is down there. Well,,,,,,,, tonight I finished my spring maintenance project and rolled the bike out of the garage. Made sure that everything was tight, put my helmet on and went for a short test drive. Ride was smooth with no problems. Put the bike in the garage and mounted the saddle bags on the frame and came in to make dinner and check email. As I was sitting here I suddenly remembered that I forgot to remove the adapter frame! I went outside just to double check and sure enough, there it was, still attached to the bike with both "pins" still in place and the coat hanger holding the front up. PLEASE, those of you who have these things be very careful. Put a ribbon on your handlebars or something to remind you to remove the frame when you are done. This is why yours are green or white or red or anything other than black. Mine is black and is very hard to see when it is in place. PLEASE, PLEASE, PLEASE be very careful. Idaho.