Need some help

cactusjack · 10-20-2008, 11:05 PM

Would anyone be willing to take a look at the 2 solenoids behind the right side intake housing and tell me which wires go to which terminal on the solenoids? I had written them down when I removed the solenoids but can't find the paper I wrote it down on. It's obvious which pair of wires goes to each solenoid, I just need which wire goes to which post. Thanks!

**ringadingh** · 10-20-2008, 11:24 PM

Im guessing it doesn't matter in this case CJ, as long as there is power to them they should work.

cactusjack · 10-20-2008, 11:31 PM

So polarity doesn't matter? These are DC solenoids.

**schoeney** · 10-21-2008, 12:57 PM

CJ,

I have a wiring diagram (click links below to see) from my Clymer's manual. I also have a Nomad in the garage. I am pretty dumb when it comes to wiring on a bike. I looked behind my right side dog dish but not sure what I am looking at, besides the spark plug wires.

If the diagram doesn't work let me know and I will try to figure out something. Maybe a pic would help?

http://i320.photobucket.com/albums/n...y/IMG_0001.jpg
http://i320.photobucket.com/albums/n...hoeney/IMG.jpg

redeye · 10-21-2008, 01:16 PM

Scott, Mine is an '03 1500. I have a beige w/red stripe & a green w/red stripe.. Looking at the bike the beige wires are attached to the outside posts. The green wires are attached the the inner most posts. Hope this helps.

dogdoc · 10-21-2008, 01:30 PM

CJ thats why I left my ICS in place and just unplugged the green wires. At our age we might forget. :-)

**schoeney** · 10-21-2008, 02:48 PM

If we are talking about the ICS valves (#1 + #2) it is illustrated on this link....you will need to zoom in a little.

http://i320.photobucket.com/albums/n...hoeney/IMG.jpg

**schoeney** · 10-21-2008, 03:01 PM

Hi Cj,

I went out and removed my doggie dish and took a picture. Click this...hope it helps.

http://i320.photobucket.com/albums/n...CValves004.jpg

redeye · 10-21-2008, 03:51 PM

Yea that's what mine looks like

dogdoc · 10-21-2008, 04:23 PM

Just unhook the green only and that unables them.

10-20-2008, 11:31 PM	#3
cactusjack Mega-Contributor Join Date: Sep 2007 Location: Where it doesn't snow...ever! Posts: 21,926	Need some help So polarity doesn't matter? These are DC solenoids. __________________ Scott "Cactusjack" Hanks VBA #00105 H.O.G. #4250060 2011 H-D Ultra Limited 103ci :: 2011 HD Electra Glide Ultra Limited w/Stage 1 :: Rallies: Mesquite '08\|Custer '09\|Cortez '10\|Crescent City '11\|Kanab '12\|Antlers '12\|Estes Park '13\|Antlers '13\|Orofino '14\|The Dalles '17
	0

10-21-2008, 12:57 PM	#4
schoeney Join Date: Jun 2008 Location: NW Region Posts: 5,222	Need some help CJ, I have a wiring diagram (click links below to see) from my Clymer's manual. I also have a Nomad in the garage. I am pretty dumb when it comes to wiring on a bike. I looked behind my right side dog dish but not sure what I am looking at, besides the spark plug wires. If the diagram doesn't work let me know and I will try to figure out something. Maybe a pic would help? http://i320.photobucket.com/albums/n...y/IMG_0001.jpg http://i320.photobucket.com/albums/n...hoeney/IMG.jpg __________________ VBA #659 2003 Nomad 1500 (Gone but never forgotten) 2005 Honda ST1300 - Sweet and still kickin 2006 Honda Goldwing - Best Boat in the Marina
	0

10-21-2008, 01:16 PM	#5
redeye Advanced Member Join Date: Dec 2007 Location: Rocklin California Posts: 777	Need some help Scott, Mine is an '03 1500. I have a beige w/red stripe & a green w/red stripe.. Looking at the bike the beige wires are attached to the outside posts. The green wires are attached the the inner most posts. Hope this helps. Login or Register to Remove Ads
	0

10-21-2008, 01:30 PM	#6
dogdoc Top Contributor Join Date: Jul 2007 Posts: 5,263	Need some help CJ thats why I left my ICS in place and just unplugged the green wires. At our age we might forget. :-)
	0

10-21-2008, 02:48 PM	#7
schoeney Join Date: Jun 2008 Location: NW Region Posts: 5,222	Need some help If we are talking about the ICS valves (#1 + #2) it is illustrated on this link....you will need to zoom in a little. http://i320.photobucket.com/albums/n...hoeney/IMG.jpg __________________ VBA #659 2003 Nomad 1500 (Gone but never forgotten) 2005 Honda ST1300 - Sweet and still kickin 2006 Honda Goldwing - Best Boat in the Marina
	0

10-20-2008, 11:05 PM	#1
cactusjack Mega-Contributor Join Date: Sep 2007 Location: Where it doesn't snow...ever! Posts: 21,926	Need some help Would anyone be willing to take a look at the 2 solenoids behind the right side intake housing and tell me which wires go to which terminal on the solenoids? I had written them down when I removed the solenoids but can't find the paper I wrote it down on. It's obvious which pair of wires goes to each solenoid, I just need which wire goes to which post. Thanks! __________________ Scott "Cactusjack" Hanks VBA #00105 H.O.G. #4250060 2011 H-D Ultra Limited 103ci :: 2011 HD Electra Glide Ultra Limited w/Stage 1 :: Rallies: Mesquite '08\|Custer '09\|Cortez '10\|Crescent City '11\|Kanab '12\|Antlers '12\|Estes Park '13\|Antlers '13\|Orofino '14\|The Dalles '17 Login or Register to Remove Ads
	0

10-20-2008, 11:24 PM	#2
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	Need some help Im guessing it doesn't matter in this case CJ, as long as there is power to them they should work. __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951
	0

10-21-2008, 03:01 PM	#8
schoeney Join Date: Jun 2008 Location: NW Region Posts: 5,222	Need some help Hi Cj, I went out and removed my doggie dish and took a picture. Click this...hope it helps. http://i320.photobucket.com/albums/n...CValves004.jpg __________________ VBA #659 2003 Nomad 1500 (Gone but never forgotten) 2005 Honda ST1300 - Sweet and still kickin 2006 Honda Goldwing - Best Boat in the Marina
	0

10-21-2008, 03:51 PM	#9
redeye Advanced Member Join Date: Dec 2007 Location: Rocklin California Posts: 777	Need some help Yea that's what mine looks like
	0

10-21-2008, 04:23 PM	#10
dogdoc Top Contributor Join Date: Jul 2007 Posts: 5,263	Need some help Just unhook the green only and that unables them.
	0