Slave cylinder spacer

doctorgski · 08-24-2008, 11:01 AM

Several topics ago, I told of replacing the seal in the slave cylinder, the one the push rod goes thru... A special word of caution; The spacer that goes on between the slave cylinder and the actual motor attachment is made of plastic, w/o it you will not be able to get the clutch all the way out. When you put all this back together, make sure you put the spacer in with the raised areas (that are around the holes), facing in, against the motor and not facing the slave cylinder. The wrong way will crack the plastic spacer every time. I know! Only an $8.00 part but most shops have to order it. When it comes, no instructions are with it to caution you of this. Just thought I would let you know... ;)

lomax · 08-24-2008, 02:45 PM

.......thanks for the tip doc! :)

dogdoc · 08-25-2008, 09:08 PM

again thanks,,

superdave · 09-13-2008, 06:18 PM

Thanx Bud...went thru this already...in Canada it's $11.62

08-24-2008, 11:01 AM	#1
doctorgski Member Join Date: Apr 2008 Location: Ft Myers FL Most of the time Posts: 218	Slave cylinder spacer Several topics ago, I told of replacing the seal in the slave cylinder, the one the push rod goes thru... A special word of caution; The spacer that goes on between the slave cylinder and the actual motor attachment is made of plastic, w/o it you will not be able to get the clutch all the way out. When you put all this back together, make sure you put the spacer in with the raised areas (that are around the holes), facing in, against the motor and not facing the slave cylinder. The wrong way will crack the plastic spacer every time. I know! Only an $8.00 part but most shops have to order it. When it comes, no instructions are with it to caution you of this. Just thought I would let you know... ;) Login or Register to Remove Ads
	0

08-24-2008, 02:45 PM	#2
lomax Advanced Member Join Date: Jul 2007 Location: Morinville, AB Posts: 904	Slave cylinder spacer .......thanks for the tip doc! :) __________________ ________________________________ "lomax" 2014 Voyager Mike Donahue Morinville, AB VBA#17 "Every day above ground is a good one!" _________________________________
	0

08-25-2008, 09:08 PM	#3
dogdoc Top Contributor Join Date: Jul 2007 Posts: 5,263	Slave cylinder spacer again thanks,,
	0

09-13-2008, 06:18 PM	#4
superdave Jr. Member Join Date: Sep 2008 Posts: 7	Slave cylinder spacer Thanx Bud...went thru this already...in Canada it's $11.62
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Was running on 1 cylinder	Blueraven	1500 & 1600 Nomad	4	10-09-2010 09:03 PM
swing arm spacer ??	recumbentbob	1500 & 1600 Nomad	4	04-17-2010 11:03 AM
Running on one cylinder	dolanz	1500 & 1600 Nomad	3	03-15-2010 10:03 PM
Anybody using Spacer Jim's spacers???	ds06nomad	Vulcan Nomad/Vaquero/Voyager	18	05-15-2008 05:56 PM
looking for hardbag mounting rubber spacer	chmorro	Vulcan Nomad/Vaquero/Voyager	14	10-10-2007 03:45 PM