|
![]() |
#1 |
Jr. Member
Join Date: Aug 2010
Location: Southern, Calif
Posts: 43
|
Hands Freezing! Recommendations?
Its starting to get cold. Any suggestions on some nice insulated gloves to keep my hands toasty? Not looking for electric heated gloves.
Please reply to my email;jm24poker@aol.com Thanks! Login or Register to Remove Ads |
![]() |
![]() |
#2 |
Advanced Member
Join Date: Dec 2017
Location: Green Bay WI
Posts: 775
|
Without a doubt, these are the warmest gloves I have ever used:
https://www.sunandski.com/p/12350658...IaAmBWEALw_wcB I bought them on a ski trip to Vancouver back in 2014. I could ski all day in 15F temps and my hands never got cold. I could stop mid mountain, take off the outer mitt and let it lay on the snow, use the inner glove to access my pockets, my phone, whatever. Then slip my hands into the mitts and never get cold. Friends skiing with me using heat pads into their ski gloves complained of numb finger. Not me. I have used them for cycle riding too, and they are effective as long as you have no issues wearing a mitt. The inner glove makes all the difference, forms a heated (my your own heat) zone inside, and the mitt acts as a wind breaker. By the way, that is during late November riding in east central Wisconsin. Probably a good bit colder than riding in California.
__________________
My $1200 Vulcan, to start from. |
![]() |
![]() |
#3 |
Top Contributor
Join Date: Aug 2011
Location: North Wilkesboro, NC
Posts: 6,289
|
The first thing you want to do is keep the wind off your hands. Goretex is great (but not cheap). My go-to is Revzilla. Their prices are as cheap as any for the most part and their Gear Geeks can make some good suggestions. If you want a good winter glove that still has good protection and dexterity, expect to pay $100+.
__________________
Christopher "Monkeyman" Gray ---------------------------- Widows Sons "Overseers" Patriot Guard Rider USArmy 1987-1990 2021 Can Am Spyder RT 2018 Can Am Spyder RT Limited - SOLD 2014 Nomad - SOLD 2012 Victory Vision - SOLD 2007 Black Nomad - SOLD VMC #9367 VBA #1860 |
![]() |
![]() |
#4 |
Top Contributor
Join Date: Feb 2008
Location: Ontario
Posts: 7,018
|
Not really applicable because the OP does not want electric gloves but here are some battery operated gloves that have Bluetooth. Expensive at 250 U.K pounds.
They are made by Furygan. |
![]() |
![]() |
#5 |
Member
Join Date: Aug 2017
Location: Rockingham, NC
Posts: 77
|
Here is what I use. I Ride year round as have riden as cold as 13 degrees!
https://www.ebay.com/itm/US-MILITARY...UAAOSwnHZYkO1R
__________________
Da Preacha 2012 Nomad Went to the darkside Ivan's flash and lots of other stuff "God is good even when we aren't!!" Login or Register to Remove Ads |
![]() |
![]() |
#6 |
![]() Join Date: May 2015
Location: Marietta, GA
Posts: 838
|
You might try searching for "motorcycle handlebar muffs", or "hippo hands". I've never used them. Some people swear by them and some hate them. Unless you can find some that are specific to your bike, they may require some modification to allow proper access to the controls while still blocking air. But, they don't require any electricity to work.
You might also check out hand deflectors or guards. They do help, but only so much. I have never had any non-heated gloves that really kept my hands warm in really cold temps, but then I have ridden in temps down to 10°F. I have a full bike powered set of liners, including heated insoles and gloves. |
![]() |
![]() |
#7 |
Advanced Member
Join Date: Dec 2017
Location: Green Bay WI
Posts: 775
|
I agree on the Hippo Hands. I have used them but I am so/so about them because my hands are some what "constrained" in that you have to be able to easily pull a hand out and get it back in with little or no thought, like after adjusting your faceshield. They do help to form a still air gap around whatever gloves you wear inside of them.
Hand guards/shield help, like the ones I've used on my BMW R1100RS. But because they don't actually seal enough to form an air gap around your gloves they are limited in cold weather effectiveness. Now, combined with the Swany mittens I posted above they work VERY well. And, you have natural access to your helmet/faceshield just as if you were wearing cool summer night gloves. Wind deflectors with Swany mittens and your hands will be warm with no power needs.
__________________
My $1200 Vulcan, to start from. |
![]() |
![]() |
#8 |
Advanced Member
Join Date: Aug 2016
Posts: 539
|
I like heated grips, a lot easier than warming your hands on the rear jug.
__________________
Tighten it till it strips and back it off a quarter turn. |
![]() |
![]() |
#9 |
![]() Join Date: May 2015
Location: DBQ Iowa
Posts: 1,807
|
Greetings,
When I saw that the OP's location is listed as Southern Cali and thinking "COLD HANDS? ![]() ![]() ![]() No offense intended to the OP, with all due respect it does get nippy in the AM hours. Have spent some time riding in Temecula and Lake Elsinore this time of year. That said, hippo hands would be the direction I'd investigate. Ride safe, Smokier |
![]() |
![]() |
#10 |
Advanced Member
Join Date: Dec 2017
Location: Green Bay WI
Posts: 775
|
I have ridden all 47+ years in upper east Wisconsin. My riding season is usually late March to late November, and then rides in the winter when conditions and temperatures are relatively moderate (think of really warm snowmobile weather). Cold riding is like rain riding, cold finds any gap to get in just like rain does. Once in the cold soaks that area.
A quality FF helmet with good ventilation, a neck sleeve to seal off the jacket to helmet zone, heated riding gear, heated grips, heated seat all make cold weather riding possible. If you can't or don't use heated gear, you still have to seal up any areas that allow cold air in. An old rider trick: if you on a tour and the weather turns cold, grab some newspapers, one against your back under your jacket, one under your jacket to block the zipper area. I have even slid newspapers into my riding pants over the tops of my thighs/knees to shield the cold.
__________________
My $1200 Vulcan, to start from. |
![]() |
![]() |
#11 |
![]() Join Date: Apr 2012
Location: NE Indiana
Posts: 997
|
__________________
Troy Donat VBA #02401 2015 Voyager 2006 1600 Nomad black(sold) 2016 Salem, Antlers, 2017 Eureka Springs, Lake George, Antlers 2018 Custer NR, Antlers |
![]() |
![]() |
#12 |
Sr. Member
Join Date: Oct 2016
Location: Minneapolis
Posts: 1,567
|
IMG_20181019_180334523_HDR[1].jpg
These help a lot. And in addition to add these https://www.amazon.com/dp/B00NYC7BH6...v_ov_lig_dp_it And you will be good to go. I have used these on my 1500 Kawi. Same as Hippo hands like Smokier and others described. https://www.amazon.com/kemimoto-Moto...omotive&sr=1-4 It took some time to get over the constraint of hands in a tube. But damn warm with the grip warmers. I like my electric gloves. I run the cords up the sleaves and behind the back pad/ liners. just have some cord out the bottom of the jacket that I plug into a pig tail hanging out the battery cover side of the seat.
__________________
Please post back after you have solved any issues 2016 1700 Vaquero 10/4/2016 2007 1500 Classic W/ Reckless Fairing, 42,000 miles 2004 600 Honda Shadow 18,000 miles 1989 500 Honda CX Custom 55,000 miles 1973 400 Kawi Triple 5,000 miles
Last edited by mbarr10; 12-06-2020 at 03:30 PM.
|
![]() |
![]() |
#13 |
Top Contributor
Join Date: Nov 2013
Location: Italy
Posts: 6,460
|
![]() ![]()
__________________
VBA 02514 - VROC 35394
VN 800 A - VN 900 Classic VN 1700 Vaquero Usque ad finem. ![]() |
![]() |
![]() |
#14 |
Sr. Member
Join Date: Jul 2016
Location: Somewhere South of Alaska....
Posts: 2,373
|
Electric glove liners for me, and then some artic gloves....
Just don't overload your bikes electric system by adding electric, glove liners, jacket liner, pants liner, electric socks....to just the bike. If I ride when its winter, by god I get set to spend at least 4 or 5 hrs in the saddle.... so I plug my top part into 1 battery, then my bottom part is plugged into another battery, both plug into my wiring system where my charger is located (in my right saddlebag). The 2 batteries will last about 8 hours, then fades fast.... My bikes electrical system doesn't need any more electrical load on it.....full gauge set, a small amp to take my 1/8 ipod cord to my marine speakers in my batwing, full led lights, airhorn, air ride system, driving lights....so my bike is pretty full....
__________________
--------------------- Don't start no schit, there won't be no schit.... *My Sarcasm is directly proportional to the amount of Stupidity involved* --------------------- VBA#03239 VROC#37400 VRA --------------------- 2014 Vaquero 2001 Nomad FI 2003 Street Glide (sold) 1500 Meanie, fresh rebuild (sold) 90s BUBF Bobber (sold) 2001 UltraCycle FatPounder (Sold) 1975 HD ElectraGlide (Sold) 1982 Kawasaki Z1 Chopper (Sold) Suck It Up & Ride! ![]()
Last edited by DragonLady58; 01-04-2021 at 02:08 AM.
|
![]() |
![]() |
#15 |
Member
Join Date: Jun 2015
Location: knoxville tn
Posts: 227
|
uncle willie used the origonal vetter hippo hands on 2 bikes rode in 20* weather without gloves but that was years ago things have changed dont think they make them anymore
|
![]() |